Factory Backup Camera

mlsully

Anything is possible if you know how to read wire diagrams and handy with electrical work. You'll need the factory camera (or any 3rd party cam really)and 4 wires to run from the camera to the NAV unit. 2 wires will be for power to the camera, 2 will be for the video feed. 1 power wire will go to the reverse signal wire (either pin 22 of the AV unit's harness, or along the driver side behind the kick panel). The other will go to ground. The 2 video feed wires will go into the harness that attaches to the NAV screen, pin 7 and 8. When the car is put in reverse, the camera is powered on via the reverse wire and the signal is sent to the screen. You'll need to look over the 2010 service manual to see if these wires already exist, or are available to tap into. Link to the needed AV manual:https://www.nicoclub.com/FSM/370Z/Coupe/2010/AV.pdf

edit: Just looked at the manual for the 2010, and those wires on the harnesses don't exist. You would have to test adding 2 wires to the display and test sending a video signal to them to see if they are active pins on that years display.

Page 263 shows the 2 harnesses I'm talking about. Look at harness M85 and M75. Compared to my 2015 M75 is missing pins 7&8 and M85 is missing pin 22.

__________________
2015 370z Nismo 7AT. Tein Flex Coilovers, Stillen Gen 3 Intake, Fast Intentions Test Pipes and Exhaust, APR Splitter, Vossen CV5 Wheels, Tuned by Seb