Clear Bra for Under Z?

OldGuy · 01-03-2010, 03:52 PM

I had my clear bra (Ventura shield I think its called) put on this afternoon. My Z, the beautiful red garage queen, remains in our warm garage with now yet another accessory affixed to her---along with her odometer which still reads fewer than 400 miles.
When he finished my install, I asked the installer to think about putting a few pieces of the shield material behind the front and back wheels. He hemmed and hawed and told me to call next week if I still wanted him to do it with the left over pieces from my installation. Has anyone else tried this? I can't see that it could hurt anything.

need4speed · 01-03-2010, 04:37 PM

U might be better off using a sealant. I don't know if underbody heat and debris might make it a inconvenient application needing frequent changing? Maybe? Might be worth looking into though?

semtex · 01-03-2010, 05:02 PM

You mean in the wheel wells? Or under the splash guards?

OldGuy · 01-03-2010, 06:27 PM

Quote:

Originally Posted by semtex

You mean in the wheel wells? Or under the splash guards?

The latter.

GETU1 · 01-03-2010, 07:51 PM

I added a ventureshield clear bra to my z as well. I asked them to add some extra pieces to underneath my front bumper. The guys said no, because it could tear down the rest of the clear bra upon a scrape.

slooton · 01-03-2010, 08:12 PM

I accept with information:The guys said no, because it could tear down the rest of the clear bra upon a scrape.

PapoZalsa · 01-03-2010, 08:26 PM

Too late for clear bra for me.

semtex · 01-04-2010, 06:48 AM

Quote:

Originally Posted by OldGuy

The latter.

When you get clearbra put on your rocker panels, it automatically gets put onto your front splash guards. Not the rears though.

01-03-2010, 03:52 PM	#1 (permalink)
OldGuy Base Member Join Date: Dec 2009 Location: Greensburg PA Posts: 899 Drives: '09370Z Red Base A7 Rep Power: 16	Clear Bra for Under Z? I had my clear bra (Ventura shield I think its called) put on this afternoon. My Z, the beautiful red garage queen, remains in our warm garage with now yet another accessory affixed to her---along with her odometer which still reads fewer than 400 miles. When he finished my install, I asked the installer to think about putting a few pieces of the shield material behind the front and back wheels. He hemmed and hawed and told me to call next week if I still wanted him to do it with the left over pieces from my installation. Has anyone else tried this? I can't see that it could hurt anything.

01-03-2010, 05:02 PM	#3 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	You mean in the wheel wells? Or under the splash guards? __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

01-03-2010, 07:51 PM	#5 (permalink)
GETU1 Base Member Join Date: Oct 2009 Location: Houston, TX Posts: 81 Drives: 2009 370Z Rep Power: 15	I added a ventureshield clear bra to my z as well. I asked them to add some extra pieces to underneath my front bumper. The guys said no, because it could tear down the rest of the clear bra upon a scrape. __________________ Added Wincos 30% tint and VentureShield clear bra.

01-03-2010, 08:12 PM	#6 (permalink)
slooton Base Member Join Date: Jan 2010 Location: Washington Posts: 1 Drives: dsfdg Rep Power: 15	I accept with information:The guys said no, because it could tear down the rest of the clear bra upon a scrape. __________________ Taux simulation de prets immo bancaire \| Credit simulateur de pret personnel \| Simulateur de pret immobilier gratuit

01-03-2010, 08:26 PM	#7 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4499	Too late for clear bra for me. __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

01-03-2010, 04:37 PM	#2 (permalink)
need4speed Base Member Join Date: Jun 2009 Location: tx Posts: 199 Drives: 08 altima 3.5se Rep Power: 15	U might be better off using a sealant. I don't know if underbody heat and debris might make it a inconvenient application needing frequent changing? Maybe? Might be worth looking into though?