Z1 Motorsports Cold Air Intakes

BlackZMamba · 05-09-2016, 11:51 PM

Does anyone have this set up? They seem to be pretty similar to the Gen 3 intakes from Stillen but $100 less in price.

Thoughts?

Silly Rabbit · 05-10-2016, 08:41 AM

Check the Intake/Exhaust section - Z1 Intakes

BlackZMamba · 05-10-2016, 10:52 AM

thanks Silly Rabbit.

Zoom370z · 05-10-2016, 06:22 PM

I dont know about that intake ? I own a stillen G3

Sent from my SM-G920T using Tapatalk

Zoom370z · 05-10-2016, 06:23 PM

My guess is they are probably close or near the same

Sent from my SM-G920T using Tapatalk

BlackZMamba · 05-13-2016, 12:38 AM

Zoom370z you are probably correct. The reason why I was asking is they are less expensive and no cutting holes is required to install them.

jchammond · 05-13-2016, 02:25 AM

I have it on mine,,,install is probably similar-Getting tuned on Monday; so not sure RWHP #'s yet......I added multiple parts at 1 time.

Sent from my iPhone using Tapatalk

jchammond · 05-13-2016, 02:30 AM

Biggest reason that I got mine; is that an immediate tune isn't required/ because the MAF sensors are in same location;just put on bottom of pipe,rather than top,,,,cleaner look.
Also,about trimming/ silicone pipe will squeeze through upper core support/ but will gently squeeze it in places,,,, I trimmed mine,so I don't kink the pipes....filters lay nicely on crash bar.

Sent from my iPhone using Tapatalk

BlackZMamba · 05-13-2016, 02:58 PM

Quote:

Originally Posted by jchammond

Biggest reason that I got mine; is that an immediate tune isn't required/ because the MAF sensors are in same location;just put on bottom of pipe,rather than top,,,,cleaner look.
Also,about trimming/ silicone pipe will squeeze through upper core support/ but will gently squeeze it in places,,,, I trimmed mine,so I don't kink the pipes....filters lay nicely on crash bar.

Sent from my iPhone using Tapatalk

Thanks for your input. It has been very helpful.

UNKNOWN_370 · 05-14-2016, 11:11 AM

Just sayin, you really can't improve on your stock intakes in terms of design.what you can do is improve flow with post MAF's and a k&n filter or the hipo filter of your choice. Then add a kickin exhaust n cats.you're good to go. You'll have the same power gains as the guys with these $500 intakes.

Remember you get the most power gains from the first breather mod of your choice. The second is a supporting mod. Starting at the exhaust will save you $$$ and net you more power.

BlackZMamba · 05-16-2016, 04:55 PM

Quote:

Originally Posted by UNKNOWN_370

Just sayin, you really can't improve on your stock intakes in terms of design.what you can do is improve flow with post MAF's and a k&n filter or the hipo filter of your choice. Then add a kickin exhaust n cats.you're good to go. You'll have the same power gains as the guys with these $500 intakes.

Remember you get the most power gains from the first breather mod of your choice. The second is a supporting mod. Starting at the exhaust will save you $$$ and net you more power.

thank you!

SS_Firehawk · 05-16-2016, 05:30 PM

I would rather breathe out of a cone filter than a panel filter all day; more surface area to filter air and pull it in.

UNKNOWN_370 · 05-16-2016, 08:18 PM

Quote:

Originally Posted by BlackZMamba

thank you!

UNKNOWN_370 · 05-16-2016, 08:30 PM

Quote:

Originally Posted by SS_Firehawk

I would rather breathe out of a cone filter than a panel filter all day; more surface area to filter air and pull it in.

In the case of our cars. Our intakes pull in the coldest air. So the mod I suggested pull up to 8hp throughout the range as a first mod.

Or you can put a Stillen on lose 8hp from 500-4900rpm. Then gain 16hp from 5000 to 7500. Seems counter productive to me.

Especially when you can pull your 15hp on-from the exhaust and then get that cold air with about +5hp as a second mod after adding an exhaust.

SS_Firehawk · 05-16-2016, 10:31 PM

The stock intakes are a restriction after 6500rpm. Upgraded maf tubes and K&N intakes will bump it up mildly, but it still plateaus. I've never seen a CAI lose power anywhere against a stock setup or even post maf tubes and K&N intakes. Those are a great bang for the buck. Also, the air is no colder than the a G3 style setup. It's not in the engine bay. There are a million threads on this topic. The Z1 intakes are a great deal and better than a panel filter with post maf tubes. You won't lose power. Just don't get a short ram.

05-09-2016, 11:51 PM	#1 (permalink)
BlackZMamba Enthusiast Member Join Date: Oct 2012 Location: La Salle, IL Posts: 345 Drives: 2013 Z @ 321 whp Rep Power: 12	Z1 Motorsports Cold Air Intakes Does anyone have this set up? They seem to be pretty similar to the Gen 3 intakes from Stillen but $100 less in price. Thoughts? bhandy and mmaxx1 like this. __________________ Mods: ECUtek \| Stillen \| Fujimura \| BC Racing \| SPC \| Avant Garde \| Fast Intentions \| Z1 Motorsports \| Akebono \| Cooper \| Redline \| Motul \| Mobil 1

05-10-2016, 08:41 AM	#2 (permalink)
Silly Rabbit Track Member Join Date: Sep 2013 Location: Brookston, IN Age: 54 Posts: 683 Drives: '12 PW Touring Sport Rep Power: 618	Check the Intake/Exhaust section - Z1 Intakes BlackZMamba likes this. __________________ NISMO R Tune Intakes \ Fast Intentions RHFC \ Borla CBE \ EcuTek Tuned\ SPL Camber Arms \ Powertrix Coilovers \ Swift Springs \ Avant Garde \ Wicked CAS \ Morimoto XB Halos \ Custom Fenders \ Hotchkis Sways \ NLP Splitter

05-10-2016, 10:52 AM	#3 (permalink)
BlackZMamba Enthusiast Member Join Date: Oct 2012 Location: La Salle, IL Posts: 345 Drives: 2013 Z @ 321 whp Rep Power: 12	thanks Silly Rabbit. __________________ Mods: ECUtek \| Stillen \| Fujimura \| BC Racing \| SPC \| Avant Garde \| Fast Intentions \| Z1 Motorsports \| Akebono \| Cooper \| Redline \| Motul \| Mobil 1

05-10-2016, 06:22 PM	#4 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	I dont know about that intake ? I own a stillen G3 Sent from my SM-G920T using Tapatalk BlackZMamba likes this.

05-10-2016, 06:23 PM	#5 (permalink)
Zoom370z Enthusiast Member Join Date: May 2014 Location: Lincoln ca Posts: 308 Drives: 2011 370z auto 7 Rep Power: 10	My guess is they are probably close or near the same Sent from my SM-G920T using Tapatalk BlackZMamba likes this.

05-13-2016, 12:38 AM	#6 (permalink)
BlackZMamba Enthusiast Member Join Date: Oct 2012 Location: La Salle, IL Posts: 345 Drives: 2013 Z @ 321 whp Rep Power: 12	Zoom370z you are probably correct. The reason why I was asking is they are less expensive and no cutting holes is required to install them. __________________ Mods: ECUtek \| Stillen \| Fujimura \| BC Racing \| SPC \| Avant Garde \| Fast Intentions \| Z1 Motorsports \| Akebono \| Cooper \| Redline \| Motul \| Mobil 1

05-13-2016, 02:25 AM	#7 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	I have it on mine,,,install is probably similar-Getting tuned on Monday; so not sure RWHP #'s yet......I added multiple parts at 1 time. Sent from my iPhone using Tapatalk Zoom370z and Memphis370Z like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

05-13-2016, 02:30 AM	#8 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Biggest reason that I got mine; is that an immediate tune isn't required/ because the MAF sensors are in same location;just put on bottom of pipe,rather than top,,,,cleaner look. Also,about trimming/ silicone pipe will squeeze through upper core support/ but will gently squeeze it in places,,,, I trimmed mine,so I don't kink the pipes....filters lay nicely on crash bar. Sent from my iPhone using Tapatalk BlackZMamba likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

05-14-2016, 11:11 AM	#10 (permalink)
UNKNOWN_370 A True Z Fanatic Join Date: Jul 2009 Location: ny'r livn in tx Posts: 8,687 Drives: well over 130m.p.h. Rep Power: 14857	Just sayin, you really can't improve on your stock intakes in terms of design.what you can do is improve flow with post MAF's and a k&n filter or the hipo filter of your choice. Then add a kickin exhaust n cats.you're good to go. You'll have the same power gains as the guys with these $500 intakes. Remember you get the most power gains from the first breather mod of your choice. The second is a supporting mod. Starting at the exhaust will save you $$$ and net you more power. Felix 808, BlackZMamba, Kzonts and 1 others like this. __________________ Favorite Quote. "I'm not gonna kill you... I'm just gonna Bash Your Face In" Jack Nicholson-"The Shining". 1980

05-16-2016, 05:30 PM	#12 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	I would rather breathe out of a cone filter than a panel filter all day; more surface area to filter air and pull it in. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

05-16-2016, 10:31 PM	#15 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	The stock intakes are a restriction after 6500rpm. Upgraded maf tubes and K&N intakes will bump it up mildly, but it still plateaus. I've never seen a CAI lose power anywhere against a stock setup or even post maf tubes and K&N intakes. Those are a great bang for the buck. Also, the air is no colder than the a G3 style setup. It's not in the engine bay. There are a million threads on this topic. The Z1 intakes are a great deal and better than a panel filter with post maf tubes. You won't lose power. Just don't get a short ram. BlackZMamba likes this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Stillen Gen 3 Cold Air Intakes	N370	Parts for sale (Private Classifieds)	10	10-16-2015 09:26 PM
[FOR SALE] K&N Cold air intakes	jose370z	Parts for sale (Private Classifieds)	8	04-18-2012 05:37 AM
Cold air intakes	leighspped	Exhaust/Intake	1	06-30-2011 09:21 AM
FS: AEM Cold Air Intakes	SE	Northern California Region	4	08-22-2010 04:49 PM
injen cold air intakes! or still G3 intakes? wich is better	fg2rick	Intake/Exhaust	10	12-08-2009 02:49 PM