Video tutorial

Louie cat · 04-01-2016, 04:32 PM

Does anyone know of a tutorial video on how to replace the Nissan 370Z Instrument panel | Part number 682001EA1A ? I will need to do this in the future ,the one in mine seems to be deteriorating due to the previous owner possibly using a chemical on it to clean it.
The whole top of it feels like pancake syrup sticky. There is no way to clean it off I tried everything,I found out today it is permanent because it easily gouged like you can peel a chunk of it off with no problem

I was doing a detail on her and discovered it today.
I am very capable and can do the job myself ,if I have a vid on it that would make for a smooth job. I just cannot locate one.

Memphis370Z · 04-01-2016, 06:09 PM

Have you checked the FSM?

SouthArk370Z · 04-01-2016, 06:26 PM

Quote:

Originally Posted by Memphis370Z

Have you checked the FSM?

Ain't no videos in the FSM.

But, yeah, it would be a great place to start.

Memphis370Z · 04-01-2016, 06:38 PM

Quote:

Originally Posted by SouthArk370Z

Ain't no videos in the FSM.

But, yeah, it would be a great place to start.

Louie cat · 04-01-2016, 06:53 PM

I will give that a shot, I just like to see the procedure by someone who has done it.

CF-370z · 10-05-2016, 03:41 PM

Quote:

Originally Posted by Louie cat

Does anyone know of a tutorial video on how to replace the Nissan 370Z Instrument panel | Part number 682001EA1A ? I will need to do this in the future ,the one in mine seems to be deteriorating due to the previous owner possibly using a chemical on it to clean it.
The whole top of it feels like pancake syrup sticky. There is no way to clean it off I tried everything,I found out today it is permanent because it easily gouged like you can peel a chunk of it off with no problem

I was doing a detail on her and discovered it today.
I am very capable and can do the job myself ,if I have a vid on it that would make for a smooth job. I just cannot locate one.

Louie,

I can clean and remove the "oil", but what is really annoying is what happens after cleanning..... If i drive at night everything stays ok... but driving in the presence of sunlight (9:00 am) the "oil" returns...

I do not need to spend more than 10 minutes driving during daylight the oil surge on dash... I believe it's a matter of time the dash will crack ...I'm 100% sure that it's caused by bad quality material the other option is that Nissan uses Transylvania Tecnology

Did you changed the dash ? Any recommendation ?

Regards

04-01-2016, 04:32 PM	#1 (permalink)
Louie cat Enthusiast Member Join Date: Mar 2016 Location: florida Posts: 261 Drives: 2010 Nismo 370z Rep Power: 142	Video tutorial Does anyone know of a tutorial video on how to replace the Nissan 370Z Instrument panel \| Part number 682001EA1A ? I will need to do this in the future ,the one in mine seems to be deteriorating due to the previous owner possibly using a chemical on it to clean it. The whole top of it feels like pancake syrup sticky. There is no way to clean it off I tried everything,I found out today it is permanent because it easily gouged like you can peel a chunk of it off with no problem I was doing a detail on her and discovered it today. I am very capable and can do the job myself ,if I have a vid on it that would make for a smooth job. I just cannot locate one.

04-01-2016, 06:09 PM	#2 (permalink)
Memphis370Z A True Z Fanatic Join Date: Sep 2014 Location: Memphis Area Posts: 3,117 Drives: '09 MB Rep Power: 124433	Have you checked the FSM? SouthArk370Z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Video from AX	Read T	Track / Autocross / Drifting / Dragstrip	4	08-11-2014 12:44 PM
CNT CBE/HFC video...	MattP725	Intake/Exhaust	10	10-17-2011 01:34 PM
Video MSR 10/30	iceman21_23	Texas	4	03-06-2010 01:32 AM
Photographing/photoshop tutorial?	ADmaster71690	Nissan 370Z Photos / Spyshots / Video / Media Gallery	4	05-29-2009 11:50 PM

04-01-2016, 06:53 PM	#5 (permalink)
Louie cat Enthusiast Member Join Date: Mar 2016 Location: florida Posts: 261 Drives: 2010 Nismo 370z Rep Power: 142	I will give that a shot, I just like to see the procedure by someone who has done it.