steering lock fuse pull

cf370z · 04-01-2017, 07:42 PM

is it normal after removing steering lock fuse for the intel.key light to stay lit up?

kenchan · 04-01-2017, 08:32 PM

TreeSemdyZee · 04-02-2017, 01:56 PM

Mine didn't. Did you have the ignition in the "On" position when you pulled the fuse?

cf370z · 04-02-2017, 04:44 PM

yes I redid it to make sure it was in acc and I still have the light .light stays on all time even when car off and walk away from it. I just replaced bcm . may be other issue , as I now cant open my hatch . and I been looking for the fuse if anyone know the location of the fuse please tell me I cant find one marked for hatch . I know where wires are in bcm for it but cant find fuse . bcm got water in it from wiring harness from car wash . had replace bcm , now hatch don't work and have the key light on but car recognizes the key. starts fine .drives fine just light on and hatch switch not working . I got to find fuse to see if its blown or if the switch itself shorted so I can repair it .

kenchan · 04-02-2017, 05:28 PM

u pushed the button twice (without clutch depressed) when u pulled da fuse?

acc is only one push..no?

cf370z · 04-02-2017, 06:04 PM

I only put it in acc and pulled , no clutch, do I need it in the on ? I thought everything I read said to be in acc pull fuse?

kenchan · 04-02-2017, 06:19 PM

no, it needs to be in da ON position.

cf370z · 04-02-2017, 09:22 PM

ok I will re do it see if it goes out , it may not may be somethng else that got messed up with the bcm .tnks

cf370z · 04-03-2017, 09:59 PM

yea tried both ways now still on so , something eles

SouthArk370Z · 04-03-2017, 10:58 PM

Invest in a multimeter (AKA VOM). A cheap one will do. You can find them at hardware/auto parts/department stores for less than $20. Then you can check for voltage to the latch solenoid at the BCM and the solenoid. And you can check the switch input, too.

cf370z · 04-03-2017, 11:42 PM

Quote:

Originally Posted by SouthArk370Z

Invest in a multimeter (AKA VOM). A cheap one will do. You can find them at hardware/auto parts/department stores for less than $20. Then you can check for voltage to the latch solenoid at the BCM and the solenoid. And you can check the switch input, too.

I got one I just haven't got that far in tring trouble shoot it I know where wires are on bcm, but haven't pulled the cover to check for voltage . I just don't know why it would work before the bcm replacement and not after . and I checked every single fuse in car no blown fuses no where I check three times .im not sure what needed done when they replaced it besides putting vin number on bcm , I don't know if any other program needed to be done at same time they coded a spare key also so I don't know whats up but I will be checking bcm voltage.

04-01-2017, 07:42 PM	#1 (permalink)
cf370z Base Member Join Date: Mar 2017 Location: florida Posts: 28 Drives: 2009 370z silver Rep Power: 8	steering lock fuse pull is it normal after removing steering lock fuse for the intel.key light to stay lit up?

04-01-2017, 08:32 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	cf370z likes this.

04-02-2017, 01:56 PM	#3 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 59 Posts: 4,880 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Mine didn't. Did you have the ignition in the "On" position when you pulled the fuse? __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

04-02-2017, 06:19 PM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	no, it needs to be in da ON position. TreeSemdyZee likes this.

04-03-2017, 10:58 PM	#10 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Invest in a multimeter (AKA VOM). A cheap one will do. You can find them at hardware/auto parts/department stores for less than $20. Then you can check for voltage to the latch solenoid at the BCM and the solenoid. And you can check the switch input, too. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

04-02-2017, 04:44 PM	#4 (permalink)
cf370z Base Member Join Date: Mar 2017 Location: florida Posts: 28 Drives: 2009 370z silver Rep Power: 8	yes I redid it to make sure it was in acc and I still have the light .light stays on all time even when car off and walk away from it. I just replaced bcm . may be other issue , as I now cant open my hatch . and I been looking for the fuse if anyone know the location of the fuse please tell me I cant find one marked for hatch . I know where wires are in bcm for it but cant find fuse . bcm got water in it from wiring harness from car wash . had replace bcm , now hatch don't work and have the key light on but car recognizes the key. starts fine .drives fine just light on and hatch switch not working . I got to find fuse to see if its blown or if the switch itself shorted so I can repair it .

04-02-2017, 05:28 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	u pushed the button twice (without clutch depressed) when u pulled da fuse? acc is only one push..no?

04-02-2017, 06:04 PM	#6 (permalink)
cf370z Base Member Join Date: Mar 2017 Location: florida Posts: 28 Drives: 2009 370z silver Rep Power: 8	I only put it in acc and pulled , no clutch, do I need it in the on ? I thought everything I read said to be in acc pull fuse?

04-02-2017, 09:22 PM	#8 (permalink)
cf370z Base Member Join Date: Mar 2017 Location: florida Posts: 28 Drives: 2009 370z silver Rep Power: 8	ok I will re do it see if it goes out , it may not may be somethng else that got messed up with the bcm .tnks

04-03-2017, 09:59 PM	#9 (permalink)
cf370z Base Member Join Date: Mar 2017 Location: florida Posts: 28 Drives: 2009 370z silver Rep Power: 8	yea tried both ways now still on so , something eles

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock Issue, too late to pull fuse?	BobbyLight	Nissan 370Z General Discussions	16	11-15-2016 10:18 PM
So I pulled the fuse for the steering lock	kennyz	Exterior & Interior	4	12-25-2015 10:55 AM
Pull Steering Lock Fuse on 2013 Nismo?	PeteZ	Nismo 370Z	2	03-19-2013 02:33 AM
Recall the steering lock fuse	R0bDC	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	19	03-09-2013 11:22 PM
Do I have the steering lock fuse? I don't want it	R0bDC	Engine & Drivetrain	5	01-03-2013 07:14 PM