Nismo front License bracket?

tjlazer · 07-16-2013, 05:08 PM

I don't think it would be an issue if you had a replica plate like that mounted, as long as it looked just like the real plate and had the same number. Good idea. Where can one get one made like that?

Chuck33079 · 07-16-2013, 05:27 PM

Quote:

Originally Posted by tjlazer

I don't think it would be an issue if you had a replica plate like that mounted, as long as it looked just like the real plate and had the same number. Good idea. Where can one get one made like that?

In a lot of states the plates are technically their property, and you'd be making a forgery. I'd do some serious reading of your state's vehicle laws before I did something like that.

jnino14 · 12-29-2013, 10:55 PM

how long does the rod have to be to clear the bumper?

fuct · 12-30-2013, 08:50 AM

Quote:

Originally Posted by jnino14

how long does the rod have to be to clear the bumper?

3.25" longer than the stillen rod. sorry im sure that doesnt really help.

Maximum RPM · 12-30-2013, 09:25 PM

I believe around 8" to clear. I did a quick measure but the plate is in the way at the moment so I couldn't get an exact measurement. I had mine custom made at moweraxle.com. I had Larry take the standard NISMO rode and shorten it by 1 3/8 so it is tucked up under the bumper just inside the grill area. Hopefully this helps.

Slam128 · 01-03-2014, 12:09 AM

+1 MowerAxle - very solid frame quality & build

salcosta · 09-21-2014, 07:06 PM

Just installed mine as well...had Larry shorten the shaft 1.5 inches. Very easy & quick install...definitely recommend.

Sal

Corsairprime · 10-09-2014, 05:04 PM

I got mine today. Absolutely the best quality. Fits great. I highly recommend this for anyone needing a front plate mount.

Thanks Larry@moweraxle.com

SwissCheese · 10-14-2014, 08:48 PM

How secure is the bracket? I'm assuming it holds up to highway speeds, but I was just curious if anyone has ever had a problem with it coming off.

Corsairprime · 10-15-2014, 05:39 PM

Yes, its fine at all speeds. The mount is very secure. Just remove when washing. Including FB links, hope they work

Side view: https://www.facebook.com/photo.php?f...8&l=b09cc7e620

Front view: https://www.facebook.com/photo.php?f...0&l=14c4f2f565

SwissCheese · 10-15-2014, 08:39 PM

Quote:

Originally Posted by Corsairprime

Yes, its fine at all speeds. The mount is very secure. Just remove when washing. Including FB links, hope they work

Side view: https://www.facebook.com/photo.php?f...8&l=b09cc7e620

Front view: https://www.facebook.com/photo.php?f...0&l=14c4f2f565

Yep, photos work just fine!

Tree70 · 10-15-2014, 09:52 PM

Larry (moweraxle.com) and I are currently working on the mount for the 2015 Nismo 370Z. We originally tried the one for the 2013 but it was too long. Larry has been helpful from the pre purchase to the post purchase. Once the item is complete I will be uploading some pictures.

Tree70 · 11-05-2014, 07:33 PM

Hey guys,

Larry did a great job working with me to get a mount that fits PERFECTLY.
See the attached pictures.

shermn · 11-10-2014, 05:47 PM

Quote:

Originally Posted by Tree70

Hey guys,

Larry did a great job working with me to get a mount that fits PERFECTLY.
See the attached pictures.

Hey Tree70! Where can i purchase this tow hook mount for the 15' nismo?

Maximum RPM · 11-11-2014, 07:00 AM

You can have Larry at moweraxle.com make you a custom plate holder like mine. I had him make the shaft longer so the plate is tucked under the nose of the car. He can make the shaft any length you want. Give him your measuments and he will make it for you.

07-16-2013, 05:08 PM	#31 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	I don't think it would be an issue if you had a replica plate like that mounted, as long as it looked just like the real plate and had the same number. Good idea. Where can one get one made like that? __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

10-09-2014, 05:04 PM	#38 (permalink)
Corsairprime Base Member Join Date: May 2014 Location: Frisco, TX Posts: 215 Drives: 14 370Z Nismo GM 6MT Rep Power: 3544	I got mine today. Absolutely the best quality. Fits great. I highly recommend this for anyone needing a front plate mount. Thanks Larry@moweraxle.com Darketch likes this. __________________ Corsairprime 2014 Nismo #462, GunMetal Grey, GT-R Start Button, AAM S-Line/R-Line intake and S-Line exhaust, Berk HFCs, Osiris Tuned at JoTech

10-14-2014, 08:48 PM	#39 (permalink)
SwissCheese Track Member Join Date: Aug 2013 Location: Iowa Posts: 785 Drives: 2012 370Z NISMO Rep Power: 66	How secure is the bracket? I'm assuming it holds up to highway speeds, but I was just curious if anyone has ever had a problem with it coming off. __________________ Current Ride: 2012 Nissan 370Z NISMO #0389 Mods: Fast Intentions Resonated Test Pipes and TDX Exhaust with 18" Resonators (#1054), K&N Drop-Ins, GTR Start Button

10-15-2014, 05:39 PM	#40 (permalink)
Corsairprime Base Member Join Date: May 2014 Location: Frisco, TX Posts: 215 Drives: 14 370Z Nismo GM 6MT Rep Power: 3544	Bracket Fit Yes, its fine at all speeds. The mount is very secure. Just remove when washing. Including FB links, hope they work Side view: https://www.facebook.com/photo.php?f...8&l=b09cc7e620 Front view: https://www.facebook.com/photo.php?f...0&l=14c4f2f565 lpnaylor likes this. __________________ Corsairprime 2014 Nismo #462, GunMetal Grey, GT-R Start Button, AAM S-Line/R-Line intake and S-Line exhaust, Berk HFCs, Osiris Tuned at JoTech

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM Front License Plate Bracket	JARblue	Parts for sale (Private Classifieds)	19	12-28-2012 05:21 PM
[FOR SALE] Stillen Front License Plate Bracket and Z License Frame	Rui Z	Parts for sale (Private Classifieds)	5	11-06-2012 01:14 AM
[FOR SALE] Nismo Front License (Tow hook bracket)	Equinox	Parts for sale (Private Classifieds)	4	01-01-2012 08:28 PM
FS: Front license bracket OEM	cossie1600	Parts for sale (Private Classifieds)	1	02-08-2011 11:51 PM

12-29-2013, 10:55 PM	#33 (permalink)
jnino14 Base Member Join Date: Sep 2013 Location: laredo Posts: 10 Drives: 1993 300z Rep Power: 11	how long does the rod have to be to clear the bumper?

12-30-2013, 09:25 PM	#35 (permalink)
Maximum RPM Base Member Join Date: Aug 2010 Location: St. Louis Posts: 30 Drives: 2012 370Z NISMO #408 Rep Power: 14	I believe around 8" to clear. I did a quick measure but the plate is in the way at the moment so I couldn't get an exact measurement. I had mine custom made at moweraxle.com. I had Larry take the standard NISMO rode and shorten it by 1 3/8 so it is tucked up under the bumper just inside the grill area. Hopefully this helps.

01-03-2014, 12:09 AM	#36 (permalink)
Slam128 Base Member Join Date: Sep 2013 Location: Los Angeles Posts: 26 Drives: 370z Nismo Rep Power: 11	+1 MowerAxle - very solid frame quality & build

10-15-2014, 09:52 PM	#42 (permalink)
Tree70 Base Member Join Date: Jul 2013 Location: Toronto Posts: 46 Drives: 2015 370Z Nismo Rep Power: 11	Larry (moweraxle.com) and I are currently working on the mount for the 2015 Nismo 370Z. We originally tried the one for the 2013 but it was too long. Larry has been helpful from the pre purchase to the post purchase. Once the item is complete I will be uploading some pictures.