What are your alignment specs on your lowered Nismo?

fuct · 10-02-2012, 12:48 PM

birdman make sure you dont have the factory specs for the sport package. the nismo has a different factory alignment spec sheet. it should say nismo somewhere at the top of that form you have. if memory serve me well the rear camber on the nismo is a min of -1.4, your sheet says -1.2.

birdmanx1 · 10-02-2012, 04:11 PM

Quote:

Originally Posted by fuct

birdman make sure you dont have the factory specs for the sport package. the nismo has a different factory alignment spec sheet. it should say nismo somewhere at the top of that form you have. if memory serve me well the rear camber on the nismo is a min of -1.4, your sheet says -1.2.

Fuct, thanks for confirming. I'm about to go back for another realignment with the shop and I'll hound them on that setting man. I take it the specialist didn't have the Nismo settings.
+1 for info

fuct · 10-03-2012, 10:13 AM

no prob! i had the guys at NTB tell me they couldnt align my car because they only had the spec sheet for the 2009 nismo...... my confidence went out the window with that comment. :\

birdmanx1 · 10-03-2012, 10:39 AM

hmmm bye lol

mwhit02 · 10-03-2012, 08:28 PM

does anyone else notice that when coming to a stop, the car wants to drastically pull to the left.

and also, it seems when just driving down a straight road the car really likes to wander, like a drunk is driving the car.

is this all due to the alignment specs or what?

chops · 10-03-2012, 08:44 PM

Quote:

Originally Posted by mwhit02

does anyone else notice that when coming to a stop, the car wants to drastically pull to the left.

and also, it seems when just driving down a straight road the car really likes to wander, like a drunk is driving the car.

is this all due to the alignment specs or what?

you definitely have some bad alignment/balance. my nismo doesnt have any brake pull. as for driving straight and not being stable, there are a few things that could be wrong. alignment, wheel balance, and tires.

check em all. id start off by asking you, do you have matched tires? (front and rears are the same brand/model). if yes, get your wheels rebalanced. if this doesnt fix it, check your alignment, your toe could be out of wack

Stino · 10-03-2012, 09:45 PM

Here is mine after lowering and installing rear camber arms & toe bolts.

http://www.the370z.com/members/stino...ment-specs.jpg

nismo09 · 02-12-2013, 05:55 PM

Quote:

Originally Posted by birdmanx1

Fellows, it is my understanding that the alignment specs for the Nismo trim are different from those of the touring/base trims (See Nismo specs provided by Scott@FontanaNissan below). I am looking to get some information pertaining to your alignment specs once you lowered your Nismo. I am in the process of getting my Nismo aligned after swift springs drop but would like to retain a slight bit of negative camber. Any information pertaining to your experience would be greatly appreciated and would be helpful for others (I hope).

Nismo 370 Alignment Specs:
Front
Camber -.58
Caster 8.17
Toe 0.03

Rear
Camber -1.58
Toe 0.08

I am just wondering if your alignment factory specs are correct (front and back)? I always thought the front camber stock settings were -1.58 for the Nismo? The reason I ask is that FINALLY SPL Parts in Austin has a 2nd generation prototype ready for testing for the front camber arms for the 370z. I have only been harassing them for 2+ years now. If all goes well, I will be the lucky one to test these out next week at Harris Hill and I want to know exactly what the factory settings for camber, caster and toe are (front at least anyway) before they make changes. Granted, we will take measurements before we install the new hardware but I am looking for the exact measurements before the change out. I have an 09 Nismo. At this point I am just going to leave the rear end alone and see what happens. Thanks for any help.

tower74 · 02-12-2013, 06:13 PM

Quote:

Originally Posted by mwhit02

does anyone else notice that when coming to a stop, the car wants to drastically pull to the left.

and also, it seems when just driving down a straight road the car really likes to wander, like a drunk is driving the car.

is this all due to the alignment specs or what?

I've got the same issue on my '13. It seems like I'm riding in the grooves of the road most of time. When I get into the passing lane it goes away. Try avoiding the lanes semi's drive in and see if it goes away.

bullitt5897 · 03-05-2013, 09:51 AM

Guys I have noticed as you lower the Z that the ideal Toe for the rear is ~.20 total toe (IN). This helps mitigate camber wear and also helpswith corner turn in response.

fuct · 03-05-2013, 02:03 PM

Quote:

Originally Posted by nismo09

I am just wondering if your alignment factory specs are correct (front and back)? I always thought the front camber stock settings were -1.58 for the Nismo? The reason I ask is that FINALLY SPL Parts in Austin has a 2nd generation prototype ready for testing for the front camber arms for the 370z. I have only been harassing them for 2+ years now. If all goes well, I will be the lucky one to test these out next week at Harris Hill and I want to know exactly what the factory settings for camber, caster and toe are (front at least anyway) before they make changes. Granted, we will take measurements before we install the new hardware but I am looking for the exact measurements before the change out. I have an 09 Nismo. At this point I am just going to leave the rear end alone and see what happens. Thanks for any help.

I know with my tein springs. (almost an inch and a half drop) my camber upfront is sitting at -1.6/-1.7..... so factory must be in that -.5/-.6 range stock. the sheets from nissan are on the forum somewhere.

rear i remember factory camber being something like -1.4/-1.6 im at -2.2ish with no camber kits.

im eating tires every 10-12k miles

birdmanx1 · 03-05-2013, 09:25 PM

At the setting I have, my tires wear is even all around. I have yet to stop at the alignment shop once again and check the Nismo settings.

10-03-2012, 10:39 AM	#19 (permalink)
birdmanx1 A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Age: 95 Posts: 3,175 Drives: 370z Nismo Rep Power: 23	hmmm bye lol __________________ 370Z NISMO #0462 \| ClearBra \| 3M tint \| Head/Taillights \| Dynamat \| Black Roof \| Tommy Kaira HB \| CF Parts \| Berk HFCs \| FI SS \| NST Pulleys \| Takeda aFe \| K&N \| H&R Spacers \| Swift Spec R \| SPC F&R \| Zuperman M370 Nismo Vid \| Nismo Journal \| Nismo Rumble

10-03-2012, 09:45 PM	#22 (permalink)
Stino Base Member Join Date: Apr 2011 Location: Florida Posts: 159 Drives: 2010 370Z Sport Rep Power: 14	Here is mine after lowering and installing rear camber arms & toe bolts. http://www.the370z.com/members/stino...ment-specs.jpg __________________ 10 370Z Sport\|Berk CBE & HFC\|NISMO R-TUNE CAI\|Z1 Oil & PS Coolers\|Mishimoto Radiator\|UpRev\|Nismo S-Tune\|SEIBON Spoiler\|Eibach Sways, Springs, Spacers\|SPC Camber\|RJM Clutch Pedal\|Enkei Wheels\|StopTech Rotors & Pads\|SS Brake/Clutch Lines\|Alpine W900BT, PDX5, Rear Camera, Boston SR60, S35 & 10" G3 Sub\|3M Ceramic Tint

03-05-2013, 09:51 AM	#25 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Guys I have noticed as you lower the Z that the ideal Toe for the rear is ~.20 total toe (IN). This helps mitigate camber wear and also helpswith corner turn in response. birdmanx1 likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-05-2013, 09:25 PM	#27 (permalink)
birdmanx1 A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Age: 95 Posts: 3,175 Drives: 370z Nismo Rep Power: 23	At the setting I have, my tires wear is even all around. I have yet to stop at the alignment shop once again and check the Nismo settings. __________________ 370Z NISMO #0462 \| ClearBra \| 3M tint \| Head/Taillights \| Dynamat \| Black Roof \| Tommy Kaira HB \| CF Parts \| Berk HFCs \| FI SS \| NST Pulleys \| Takeda aFe \| K&N \| H&R Spacers \| Swift Spec R \| SPC F&R \| Zuperman M370 Nismo Vid \| Nismo Journal \| Nismo Rumble

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock alignment specs?	import111	Brakes & Suspension	30	09-18-2021 03:17 PM
Nismo Lowered on Tein S Tech Lowering Springs	johnnydrama	Brakes & Suspension	80	03-04-2012 10:23 AM
Where to get your lowered z for wheels alignment in ATL area??	atl370z	South East Region	8	02-19-2011 02:12 PM
Alignment (Lowered Friendly)	mjch3n	Northern California Region	5	01-02-2011 12:13 AM

10-02-2012, 12:48 PM	#16 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	birdman make sure you dont have the factory specs for the sport package. the nismo has a different factory alignment spec sheet. it should say nismo somewhere at the top of that form you have. if memory serve me well the rear camber on the nismo is a min of -1.4, your sheet says -1.2.

10-03-2012, 10:13 AM	#18 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	no prob! i had the guys at NTB tell me they couldnt align my car because they only had the spec sheet for the 2009 nismo...... my confidence went out the window with that comment. :\

10-03-2012, 08:28 PM	#20 (permalink)
mwhit02 Enthusiast Member Join Date: Sep 2012 Location: St. Louis Posts: 358 Drives: '15 Audi Allroad Rep Power: 12	does anyone else notice that when coming to a stop, the car wants to drastically pull to the left. and also, it seems when just driving down a straight road the car really likes to wander, like a drunk is driving the car. is this all due to the alignment specs or what?