370z Nismo Dyno after CBE/HFC Upgrades

Nismo_370z · 07-08-2010, 08:43 AM

I just going off the theory, NOTE: im just a beginner and just learning as I go, But the whole purpose of having A CAI, HFC, CBE is to increase fuel consumption and efficiency of the combustion engine. But the goal is to tune the car with the best combination of the three, to have the fastest acceleration...

SO you could do a rundown of each individual intake/exhaust mod. But what they should do is give a rundown of each possible combination...and find out which creates the best efficiency. I'm visualizing an internal combustion engine as a chemical reactor. The rate of reaction depends on the rate of Oxygen/fuel ----> Products, CO2, CO, POWER...ect.

So the current dual air intakes may be sufficient to supplying air to the engine, but a dyno CANNOT correctly simulate the airflow into your intake at say 80 mph on the highway. So how can you say that the HFC has better results when there are more variable to be evaluated under the correct conditions.

Sorry to beat this into the bush but this really interests me.....and should make a good discussion...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Fuel System, and Upgrades	phunk	Engine & Drivetrain	38	03-06-2012 06:09 PM
Owners of 370z aftermarket upgrades...	jaesung83	DIY Section (Do-It-Yourself)	6	09-24-2010 12:12 AM
370z w/upgrades n new wheels.must go!!	danielcast	Cars for sale (Private Classifieds)	2	06-18-2010 08:46 AM
nismo exhaust upgrades!!!!!!	RaY d M	Intake/Exhaust	33	11-18-2009 07:09 PM
NISMO 370z DYNO SPECS	Nismo_370	Engine & Drivetrain	127	10-13-2009 12:16 AM

07-08-2010, 08:43 AM	#17 (permalink)
Nismo_370z Base Member Join Date: May 2010 Location: Oklahoma Posts: 32 Drives: 09 Nismo 370Z BS M6 Rep Power: 15	I just going off the theory, NOTE: im just a beginner and just learning as I go, But the whole purpose of having A CAI, HFC, CBE is to increase fuel consumption and efficiency of the combustion engine. But the goal is to tune the car with the best combination of the three, to have the fastest acceleration... SO you could do a rundown of each individual intake/exhaust mod. But what they should do is give a rundown of each possible combination...and find out which creates the best efficiency. I'm visualizing an internal combustion engine as a chemical reactor. The rate of reaction depends on the rate of Oxygen/fuel ----> Products, CO2, CO, POWER...ect. So the current dual air intakes may be sufficient to supplying air to the engine, but a dyno CANNOT correctly simulate the airflow into your intake at say 80 mph on the highway. So how can you say that the HFC has better results when there are more variable to be evaluated under the correct conditions. Sorry to beat this into the bush but this really interests me.....and should make a good discussion...