Exhasut tip size

smithmt09 · 08-04-2016, 09:36 AM

Hey everyone, I have a 11 Nismo and I am running the AAM short tails with 4" tips. I was curious if anyone was running the same set up and is able to measure from the furthest back point on the short tails before the pipe bends where the tip is able to be fitted to the edge of the tip of the bumper for me and maybe snap a pic of a ruler next to it. my 4" AAM tips are not really cutting it for me and I found some tips I like that are dual exit(quad tips) only problem is the are 10.25 inches long and I don't know if they are going to fit. I have no problem cutting back the short tail ends to make them shorter I just need to know how far it is before the pipe bends to the bumper to see if its even worth it. the tips are 2. inlet to dual 3.5 exit. I know the ends will fit, im just worried about the length. the tips are also bolt on so worst comes to worst I can put about 2 inches off the inlet of the tip and about the same off the short tails and weld the tips on but would rather bolt them up to keep it rotatable. thanks

Will try and add a pic of what im talking about measuring. (im away for work and don't have access to my car btw)

smithmt09 · 08-04-2016, 09:42 AM

This is obviously not a nismo bumper but you get the idea

Sent from my iPhone using Tapatalk

madeinjapan · 08-04-2016, 12:31 PM

I found some tips I like that are dual exit(quad tips)

???

smithmt09 · 08-04-2016, 12:42 PM

quad tips - Bing images

smithmt09 · 08-11-2016, 06:59 AM

Ended up buying them and giving it a try here is the final product.

Sent from my iPhone using Tapatalk

madeinjapan · 08-11-2016, 08:33 AM

looks like its touching the bumper ? hope not

might look better if you cut out the diffuser to match

smithmt09 · 08-11-2016, 09:30 AM

Its not touching the bumper it gets smaller after the first 3 inches so I have about a 1/2" to a inch between the bumper and the tip. ha sorry bout the double post...

brandon3434 · 08-11-2016, 02:14 PM

Sorry man, but that looks horrible. Exhaust would need to go up and more to the center to make that work, and the diffuser would need to be cut.

smithmt09 · 08-11-2016, 02:22 PM

There slide right off if I want them too.. I had the exact same gap with my 4" tips from Aam because I adjusted the pipes higher when I put these tips on. It s just the angle of the camera.. It looks much different in person. Only thing I didn't like was how much further out they stuck. But whatever. diffuser cut out is not visible unless you put your head at eye level..

Sent from my iPhone using Tapatalk

brandon3434 · 08-11-2016, 02:25 PM

Yeah, so anyone that is driving behind you will see it clearly lol. :P

smithmt09 · 08-11-2016, 02:26 PM

I'll stand 30 feet back tonight at driving hight and see if it looks funny

Sent from my iPhone using Tapatalk

madeinjapan · 08-11-2016, 02:39 PM

There slide right off ?????????

smithmt09 · 08-11-2016, 02:47 PM

The tips bolt on.. I mean if I loosen them they will slide right off ha they have clamps.

Sent from my iPhone using Tapatalk

08-04-2016, 09:36 AM	#1 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	Exhasut tip size Hey everyone, I have a 11 Nismo and I am running the AAM short tails with 4" tips. I was curious if anyone was running the same set up and is able to measure from the furthest back point on the short tails before the pipe bends where the tip is able to be fitted to the edge of the tip of the bumper for me and maybe snap a pic of a ruler next to it. my 4" AAM tips are not really cutting it for me and I found some tips I like that are dual exit(quad tips) only problem is the are 10.25 inches long and I don't know if they are going to fit. I have no problem cutting back the short tail ends to make them shorter I just need to know how far it is before the pipe bends to the bumper to see if its even worth it. the tips are 2. inlet to dual 3.5 exit. I know the ends will fit, im just worried about the length. the tips are also bolt on so worst comes to worst I can put about 2 inches off the inlet of the tip and about the same off the short tails and weld the tips on but would rather bolt them up to keep it rotatable. thanks Will try and add a pic of what im talking about measuring. (im away for work and don't have access to my car btw)

08-11-2016, 06:59 AM	#5 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	Exhasut tip size Ended up buying them and giving it a try here is the final product. Sent from my iPhone using Tapatalk Last edited by smithmt09; 08-11-2016 at 02:16 PM.

08-11-2016, 02:14 PM	#8 (permalink)
brandon3434 Base Member Join Date: Apr 2011 Location: Cincinnati, Ohio Posts: 137 Drives: GT350R Rep Power: 14	Sorry man, but that looks horrible. Exhaust would need to go up and more to the center to make that work, and the diffuser would need to be cut. Chuck33079 likes this.

08-11-2016, 02:47 PM	#13 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	Exhasut tip size The tips bolt on.. I mean if I loosen them they will slide right off ha they have clamps. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jordan Retro 6 Infrared size 11, 11.5, & 12 \| Carmine size 10.5	Blessed89	Misc Items for sale (No Z stuff)	0	12-08-2014 11:18 PM
FIXED RASPY Exhasut today !	levani041491	Intake/Exhaust	5	12-03-2013 01:16 PM
what size?	SmallermouseZ	Canada	0	09-01-2012 02:23 AM
What the hub size ...	370Z_Fan	Wheels & Tires	1	11-25-2010 11:38 PM
Rim Size	snapping	Wheels & Tires	18	04-17-2010 09:09 PM

08-04-2016, 09:42 AM	#2 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	This is obviously not a nismo bumper but you get the idea Sent from my iPhone using Tapatalk

08-04-2016, 12:31 PM	#3 (permalink)
madeinjapan Banned Join Date: Jan 2016 Location: pistolvania Posts: 1,387 Drives: 2013 g37x 2014 370z Rep Power: 0	I found some tips I like that are dual exit(quad tips) ???

08-04-2016, 12:42 PM	#4 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	quad tips - Bing images

08-11-2016, 08:33 AM	#6 (permalink)
madeinjapan Banned Join Date: Jan 2016 Location: pistolvania Posts: 1,387 Drives: 2013 g37x 2014 370z Rep Power: 0	looks like its touching the bumper ? hope not might look better if you cut out the diffuser to match

08-11-2016, 09:30 AM	#7 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	Its not touching the bumper it gets smaller after the first 3 inches so I have about a 1/2" to a inch between the bumper and the tip. ha sorry bout the double post...

08-11-2016, 02:22 PM	#9 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	There slide right off if I want them too.. I had the exact same gap with my 4" tips from Aam because I adjusted the pipes higher when I put these tips on. It s just the angle of the camera.. It looks much different in person. Only thing I didn't like was how much further out they stuck. But whatever. diffuser cut out is not visible unless you put your head at eye level.. Sent from my iPhone using Tapatalk

08-11-2016, 02:25 PM	#10 (permalink)
brandon3434 Base Member Join Date: Apr 2011 Location: Cincinnati, Ohio Posts: 137 Drives: GT350R Rep Power: 14	Yeah, so anyone that is driving behind you will see it clearly lol. :P

08-11-2016, 02:26 PM	#11 (permalink)
smithmt09 Base Member Join Date: Jul 2016 Location: Charlotte NC Posts: 70 Drives: 2011 Nismo Rep Power: 8	I'll stand 30 feet back tonight at driving hight and see if it looks funny Sent from my iPhone using Tapatalk

08-11-2016, 02:39 PM	#12 (permalink)
madeinjapan Banned Join Date: Jan 2016 Location: pistolvania Posts: 1,387 Drives: 2013 g37x 2014 370z Rep Power: 0	There slide right off ?????????