I need help.

Baer383 · 12-18-2012, 05:52 PM

It you are running Osiris/Uprev like I'm running I also had this code ,Sam at GTM told me to turn off the dtc with Uprev never had a problem since.

The370zguy12 · 12-18-2012, 07:35 PM

Quote:

Originally Posted by Baer383

It you are running Osiris/Uprev like I'm running I also had this code ,Sam at GTM told me to turn off the dtc with Uprev never had a problem since.

I turned it off and the car is still limp mode

just I have a appointment on the 26th with ums I may have mechanical issues this sux I only have 7 k miles

Baer383 · 12-18-2012, 07:41 PM

Quote:

Originally Posted by The370zguy12

I turned it off and the car is still limp mode

just I have a appointment on the 26th with ums I may have mechanical issues this sux I only have 7 k miles

Did you try disconnecting the battery?

The370zguy12 · 12-18-2012, 07:53 PM

Quote:

Originally Posted by Baer383

Did you try disconnecting the battery?

would that help? and let it set for 10 mins?

Baer383 · 12-18-2012, 08:01 PM

Quote:

Originally Posted by The370zguy12

would that help? and let it set for 10 mins?

You can leave it sit for a minute or two connect it and try to start it.

The370zguy12 · 12-18-2012, 08:05 PM

Quote:

Originally Posted by Baer383

You can leave it sit for a minute or two connect it and try to start it.

some people told me i may need to go buy a new map sensor and findout what bank its on 1 or 2 and replace it but since i wiped out the thrown code i cant find out the bank, so your suggesting unplug battery for a little bit then restart the car? you think i should let it idle for a little bit and shut it off then do it again afterwards before i take it out for a little cruise to give it time to reprogram?

SouthArk370Z · 12-18-2012, 08:10 PM

Quote:

Originally Posted by The370zguy12

some people told me i may need to go buy a new map sensor and findout what bank its on 1 or 2 and replace it but since i wiped out the thrown code i cant find out the bank, so your suggesting unplug battery for a little bit then restart the car? you think i should let it idle for a little bit and shut it off then do it again afterwards before i take it out for a little cruise to give it time to reprogram?

They may have meant MAF sensor, since there is only one MAP sensor.

If a MAF sensor is the problem, try cleaning them first.

SouthArk370Z · 12-18-2012, 08:03 PM

Quote:

Originally Posted by The370zguy12

would that help? and let it set for 10 mins?

Disconnecting the battery might help. At this point, it's certainly worth a try. It clears volatile memory in the control modules. I haven't tried it, but I've heard that pumping the brakes will discharge everything almost instantly.

You'll lose your radio presets and probably have to reset the windows. The ECM will forget it's on-the-fly tuning data and will have to relearn before the engine will run right. You will have to go through a few drive cycles before everything gets back to normal.

12-18-2012, 05:52 PM	#1 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 31	It you are running Osiris/Uprev like I'm running I also had this code ,Sam at GTM told me to turn off the dtc with Uprev never had a problem since. __________________ 2013 ZL1 754 rwhp 747 rwtq