Quote:
|
Quote:
100% call Chad. Here is his website: Rasky's Auto Detailing He is well known throughout the country, and does the best of the best work. He's one of the top resources on Detailed Image (detailing blog). There's guys that SHIP cars to him throughout the US and Canada! He's typically booked about 3-5 months(which says something about his work) but is in your favor with winter. Your car will literally look better then showroom new. |
Quote:
Sent from my HTC One using Tapatalk |
Quote:
Depending on how bad the repair is, Janik is a G member that has been doing detailing on the side for a few years now. He actually learned everything he knows from Chad. I think he typically charges 2-300. He's not a professional, but he is very reputable (I've known him for years) and knows what he's doing. I can get you in touch with him too, he goes to school in Fargo but comes home for weekends and jobs. Chad is one of the "best of the best" and is a professional. He reads your clear coat and how thick it is, and does full paint repair. He's taken some cars that everyone said needed to be repainted and he made them look brand spankin' new. |
Quote:
|
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
Quote:
|
Quote:
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
I still have to put socks and plastic bags over the exhaust tips, just in case. Also need to monitor the tires and maintain a higher than normal PSI for the winter.
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
Quote:
My shop is about 30-40 mins south of where I live. I've taken my G35, G37, and FX35 there. A few months ago, I found out that Kline Nissan sends some of their warranty work(had a door resprayed on our 2013 Altima) to a shop near them which they did immaculate work on my wife's door, color matched perfectly in pearl white. Was very impressed. I'll try and figure out which shop this is for you... |
Quote:
Sent from my HTC One using Tapatalk |
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
Quote:
Zane should buy the one I sold Tevi...thing is softer then silk. |
Quote:
Sent from my HTC One using Tapatalk |
Quote:
|
Quote:
|
Have a great Thanksgiving everyone!~
|
Quote:
Sent from my HTC One using Tapatalk |
Any of you guys planning on going on that memorial cruise on the 8th for paul walker?
|
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
Hey guys! I NEED to meet everyone, anyways I have a base 12 370z and it sitting for the winter and was wondering if or what suspension setup you all recommend and what brands, coils or springs shocks/struts? After you buy the springs and s/s your only a couple hundred away from a set of decent coils. Not tracking the car but may do some time at bir or mostly spirited driving. And if anyone has stuff for sale for there 370z or if theres a place on the370z.com where you look for local sales. Going to get FI cbe with 12" res and hi flow cats non res, and was thinking headers? Also I ordered Takeda attack intake. Thanks and sorry for long post.
|
Quote:
As for everything else, just let me know what you need. I'm a Vendor for Fast Intentions so I can answer any and all questions having to do with their products. Have owned two of their exhausts (G37 and now Nismo), have been to their shop for a full week in Simi Valley, CA to see how things are built. Can't speak any higher when it comes to quality of their products which is why you really don't see me advertise for any other exhaust even though I can get pretty much any exhaust available for our platforms. If you do LTH's, you won't need cats/tps since they completely delete the cat section. We CAN put 100cell cats in the end of the headers for you. Suspention, like I mentioned before, its all up to what you want to spend. I can offer great prices on any brand. BC Racing is a great coilover for around $1k, which you find is a commonly used coil on these forums. Stance coils give great adjustability but a horish ride quality. For $1500ish I would say Tein or KW V1's. Around 2k you're getting into KW V3's and "edfc" options for Tein. Keep in mind, you'll want atleast a rear camber kit, if not front camber arms depending on how low you go. You know you're more then welcome to PM me anytime on here, or add me on Facebook> Personal page is Lance NextLevel Perf, biz page is www.facebook.com/nextlevelperf |
Quote:
Sent from my HTC One using Tapatalk |
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
:hello:
Winters are terrible for me. I start window shopping online for all kinds of new toys. Thinking of building an AR15. But I also need that new exhaust for the Z. |
Quote:
|
Quote:
Sent from my HTC One using Tapatalk |
All times are GMT -5. The time now is 02:13 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2