Kansas City

aCoul82 · 03-12-2013, 05:11 PM

Well after reading through a few of the oil cooler threads I just pulled the trigger on a 25 row with thermostatic plate from z1. If anyone else is interested in these use code FREEWRAP
for free insulation of the lines which was a $30 add-on option.

tower74 · 03-12-2013, 05:34 PM

Quote:

Originally Posted by aCoul82

Well after reading through a few of the oil cooler threads I just pulled the trigger on a 25 row with thermostatic plate from z1. If anyone else is interested in these use code FREEWRAP
for free insulation of the lines which was a $30 add-on option.

Damn, I wish would of know you were looking for one. I have a 25 row sebron(sp) oil cooler just sitting gathering dust.

aCoul82 · 03-12-2013, 08:40 PM

Quote:

Originally Posted by tower74

Damn, I wish would of know you were looking for one. I have a 25 row sebron(sp) oil cooler just sitting gathering dust.

Whoops. Chalk one up for impulse purchases. I'm starting to pile this stuff up. Putting of installs because "well I might as well wait til I buy _____ so I can install them at the same time"
Got hi flow cats, hawk pads, filter and redline oil and soon an oil cooler waiting. Want to do the cats at the same time as a CBE. Want to do a G3 intake when I have the bumper off for the oil cooler. Why not do the cats when the stock tubes/boxes are off for the intake ie why not do it all at the same time? lol

tower74 · 03-12-2013, 09:07 PM

Quote:

Originally Posted by aCoul82

Whoops. Chalk one up for impulse purchases. I'm starting to pile this stuff up. Putting of installs because "well I might as well wait til I buy _____ so I can install them at the same time"
Got hi flow cats, hawk pads, filter and redline oil and soon an oil cooler waiting. Want to do the cats at the same time as a CBE. Want to do a G3 intake when I have the bumper off for the oil cooler. Why not do the cats when the stock tubes/boxes are off for the intake ie why not do it all at the same time? lol

I agree. Trust me when we tore the turbo out of my car I learned a ton about this car. Exhaust, cats, oil coolers, fuel injectors etc. These cars are pretty easy to work on. Just be warned about the demon bolts. If you haven't read anything on them plan on spending a good portion of the day taking 8 bolts off. They are a beating.

aCoul82 · 03-12-2013, 10:36 PM

Yeah I've heard of them. I was going to see if my buddy (his dad owns Santa Fe Body) has any friends at a Nissan dealer than would lend the oil wrench for an hour or w/e it's called to remove them

edub370 · 03-13-2013, 08:07 AM

Quote:

Originally Posted by tower74

Damn, I wish would of know you were looking for one. I have a 25 row sebron(sp) oil cooler just sitting gathering dust.

u have a 25 row cooler sitting around? hmm... may be interested. all the hardware as well?

tower74 · 03-13-2013, 08:17 AM

Quote:

Originally Posted by edub370

u have a 25 row cooler sitting around? hmm... may be interested. all the hardware as well?

Of course. It came from that Shytty Turbo System I have sitting in a box.

edub370 · 03-13-2013, 08:44 AM

Quote:

Originally Posted by tower74

Of course. It came from that Shytty Turbo System I have sitting in a box.

Maaay just take that off your hands....

i'll be texting u sir

sboden · 03-13-2013, 09:15 AM

Quote:

Originally Posted by edub370

Maaay just take that off your hands....

i'll be texting u sir

I thought you already had an oil cooler.....

The federal government just took $4500 from me, so that cuts down on the mods....sure is helping the economy isn't it................................................ ......

mcconned · 03-14-2013, 05:39 PM

Quote:

Originally Posted by sboden

I thought you already had an oil cooler.....

The federal government just took $4500 from me, so that cuts down on the mods....sure is helping the economy isn't it................................................ ......

OUCH!! That's rough Scott.

tower74 · 03-14-2013, 08:27 PM

Quote:

Originally Posted by sboden

I thought you already had an oil cooler.....

The federal government just took $4500 from me, so that cuts down on the mods....sure is helping the economy isn't it................................................ ......

I'm 1099'd. So yeah I'm looking at almost 30k+ a year I have to come up with.....and that just the feds.

03-12-2013, 05:11 PM	#1 (permalink)
aCoul82 Base Member Join Date: Dec 2012 Location: Overland Park, KS Posts: 43 Drives: 40th Ann. build #559 Rep Power: 14	Well after reading through a few of the oil cooler threads I just pulled the trigger on a 25 row with thermostatic plate from z1. If anyone else is interested in these use code FREEWRAP for free insulation of the lines which was a $30 add-on option. edub370 likes this.

03-12-2013, 10:36 PM	#5 (permalink)
aCoul82 Base Member Join Date: Dec 2012 Location: Overland Park, KS Posts: 43 Drives: 40th Ann. build #559 Rep Power: 14	Yeah I've heard of them. I was going to see if my buddy (his dad owns Santa Fe Body) has any friends at a Nissan dealer than would lend the oil wrench for an hour or w/e it's called to remove them Last edited by aCoul82; 03-12-2013 at 10:46 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2009 370Z Touring w/Sports - Solid Red - Kansas City, MO	microday	370Z For Sale	2	11-16-2011 03:43 AM
Hello from Oklahoma City!	JoshW	New Forum Member	9	05-07-2011 11:22 PM
Cin City, OH.....	The Collector	New Forum Member	7	11-07-2009 10:26 PM
Hello from Sin City	B_K	Introduction	4	02-26-2009 10:36 PM
Hello from Sin City!	B_K	New Forum Member	7	02-26-2009 04:12 PM