Anyone doing Carlisle this spring? P&S and/or Import & Kit Nationals?

XwChriswX · 04-01-2013, 09:59 PM

Quote:

Originally Posted by MyKindaGuise

But none of you have the ark exhaust.Lol Its okay I don't really feel like having this debate. Anyways point is headers are for sale they have the gains. Same as the exhaust.

Ark vs FI isn't going to have a drastic difference as the flow patterns are roughly the same. I'm just saying, I have them, and 330 won't happen. I don't want to see your hopes not fulfilled..

Quote:

Originally Posted by FPenvy

What dyno does aam use?

DynoJet AWD Dyno

FPenvy · 04-01-2013, 10:00 PM

Quote:

Originally Posted by XwChriswX

I did film it, just the runs were not impressive enough to merit uploading...

They're super huge files, if you want me to email them to you, I'll try to figure out a way.

That would be awesome if you could. I usually roll alone when I go to this things and wanna know what it sounds like lol

FPenvy · 04-01-2013, 10:00 PM

Quote:

Originally Posted by MyKindaGuise

I doubt a mustang dyno. to the aam website!!!!

Which dyno reads high and low I can never remember these things

MyKindaGuise · 04-01-2013, 10:02 PM

Quote:

Originally Posted by FPenvy

Which dyno reads high and low I can never remember these things

Mustang is lowww. Aka a heart breaker dyno.

Chris Idk man you may be surprised. No one has my setup. Same things were being said with the momentums

XwChriswX · 04-01-2013, 10:02 PM

Quote:

Originally Posted by FPenvy

That would be awesome if you could. I usually roll alone when I go to this things and wanna know what it sounds like lol

Next time you come down, we'll figure out something. Chase vids or something...

Quote:

Originally Posted by FPenvy

Which dyno reads high and low I can never remember these things

Mustangs read low, due to being a load bearing dyno. DynoJets are usually the middle ground, dynodynamics and dynapacks are usually the higher reading ones.

dmhenderson · 04-01-2013, 10:02 PM

If the Ark exhaust was that much better than the FI system, no one would buy FI. That doesn't make sense to me.

MyKindaGuise · 04-01-2013, 10:03 PM

I'd like to see what you guys would get on mcnews mustang dyno. Would be interesting for sure

dmhenderson · 04-01-2013, 10:03 PM

Quote:

Originally Posted by XwChriswX

Next time you come down, we'll figure out something. Chase vids or something...

Mustangs read low, due to being a load bearing dyno. DynoJets are usually the middle ground, dynodynamics and dynapacks are usually the higher reading ones.

I have a bumper mounted GoPro I'm anxious to test out.

XwChriswX · 04-01-2013, 10:05 PM

Quote:

Originally Posted by MyKindaGuise

Mustang is lowww. Aka a heart breaker dyno.

Chris Idk man you may be surprised. No one has my setup. Same things were being said with the momentums

I understand that, but I'm just telling you not to get your hopes up. Momentums are shorty headers so granted there was reason to doubt them... I still am not sure exactly why they supposedly make so much more, when compared to our parts. But I'm not a fan of using parts from another motor on mine, that's just me.

I hope you DO tag 330 because it might help give light to my problem. But as of yet, I don't think anyone with any setup and the headers has hit 300, and I have every bolt on you can do besides the motordyne manifuld which is a joke/ripoff.

MyKindaGuise · 04-01-2013, 10:06 PM

Quote:

Originally Posted by dmhenderson

If the Ark exhaust was that much better than the FI system, no one would buy FI. That doesn't make sense to me.

Its really because FI has a lot of hype. Ask a lot of the people who have an ark. They wouldn't trade it for anything. Personally the sound is just better to me. not even the sound as a whole. Little things like flutters on down shifts and the sound when the flood gates open at 4k. FI is great they make really good stuff hence me having their headers. I just think the Ark is the better exhaust mostly because of x pipe placement

FPenvy · 04-01-2013, 10:06 PM

Quote:

Originally Posted by MyKindaGuise

Mustang is lowww. Aka a heart breaker dyno.

Chris Idk man you may be surprised. No one has my setup. Same things were being said with the momentums

So my 324 on a mustang is low?!?!

Insta-boner!!!!!

dmhenderson · 04-01-2013, 10:07 PM

The answer is: Test pipes.

lol

XwChriswX · 04-01-2013, 10:08 PM

Quote:

Originally Posted by MyKindaGuise

I'd like to see what you guys would get on mcnews mustang dyno. Would be interesting for sure

My previous Dyno's were on a Mustang.

And with K&N Drop Ins, MAF Tubes, Headers and CBE, and Pulleys, I did 284whp with no tune.

MyKindaGuise · 04-01-2013, 10:08 PM

Quote:

Originally Posted by XwChriswX

I understand that, but I'm just telling you not to get your hopes up. Momentums are shorty headers so granted there was reason to doubt them... I still am not sure exactly why they supposedly make so much more, when compared to our parts. But I'm not a fan of using parts from another motor on mine, that's just me.

I hope you DO tag 330 because it might help give light to my problem. But as of yet, I don't think anyone with any setup and the headers has hit 300, and I have every bolt on you can do besides the motordyne manifuld which is a joke/ripoff.

They make power because of the collector they run. It flows better with less turbulence. Also why the Ark is so good. That x pipe placement is perfect in stopping a lot of turbulence.

XwChriswX · 04-01-2013, 10:09 PM

Quote:

Originally Posted by FPenvy

So my 324 on a mustang is low?!?!

Insta-boner!!!!!

It was 324 on a DynoJet bud.

Not a mustang.

04-01-2013, 10:02 PM	#321 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	If the Ark exhaust was that much better than the FI system, no one would buy FI. That doesn't make sense to me. __________________

04-01-2013, 10:03 PM	#322 (permalink)
MyKindaGuise A True Z Fanatic Join Date: Feb 2012 Location: Pennsylvania Posts: 2,029 Drives: 11' 370z Sprt M6 Rep Power: 19	I'd like to see what you guys would get on mcnews mustang dyno. Would be interesting for sure __________________ \|445whp398tq\| \|BW S259 Turbo\|3" Downpipe\Exhaust\|ID1000\|AeroMotive\|Tial\|EcuTek\|BC BR\|S0-4\|MaffFab\| MKGs-Single-Turbo

04-01-2013, 10:07 PM	#327 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	The answer is: Test pipes. lol __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: Import Alliance Spring Meet Coverage	ChadB@Forged	Member's 370Z Gallery	0	04-24-2012 01:08 PM
Anyone going to Spring break Nationals?	RonRizz	Audio & Video	8	03-10-2012 07:40 PM
1st Annual East Coast Z Nationals -Carlisle, PA - May 22-23	Quidproquo	North East Region	5	05-19-2010 08:28 AM
East Coast Z Nationals-Carlisle, Pennsylvania	Pats300zx	North East Region	9	04-22-2010 06:41 PM
Spring Break Nationals 2010	ohmanitsmason	The Lounge (Off Topic)	1	02-18-2010 07:27 PM