Headlight modification?

eastwest2300 · 09-10-2012, 10:40 PM

Nevermind... its black, I just saw that.

weiboy718 · 09-10-2012, 11:05 PM

Sorry to be bumming in a different territory but I thought maybe I can help out a little bit with information.

You guys should try out this paint, it is a Matte black finish yet it has a slight gloss to it.

Here's the link!
SEM Paints (SEM39143) Trim Black,Aerosol : Amazon.com : Automotive

And a few picture of the actual housing painted using that product.

Also, if your oven is slightly too small for the corner of the housing and is touching the oven don't sweat it! Wrap that part up with foil paper so it wouldn't melt. An important tip, make sure the paint is fully cured before baking it again because the last thing you would want is the chemical released from the paint and mess up your lens. Never wipe the inside the of the lens as that will scratch it up, once opened immediately wrap it up with cookie sheet or shrink wrap. Hope this helps!

Good luck and have fun!

b1adesofcha0s · 09-10-2012, 11:10 PM

No problem man, we appreciate the advice

dmhenderson · 09-10-2012, 11:13 PM

I like the look of it but they're asking $16 per paint can plus an additonal $16 (lol what) in shipping for 3-5 day delivery - which I don't have.

I'll go with the krylon in the DIY thread since I have volunteers.

weiboy718 · 09-10-2012, 11:15 PM

Quote:

Originally Posted by dmhenderson

I like the look of it but they're asking $16 per paint can plus an additonal $16 (lol what) in shipping for 3-5 day delivery - which I don't have.

I'll go with the krylon in the DIY thread since I have volunteers.

You can check your local automotive paint shops too. Not just amazon.

dmhenderson · 09-10-2012, 11:19 PM

Well i'll check autozone and pep boys tomorrow but I doubt they have anything other than the "touch up" paint.

weiboy718 · 09-10-2012, 11:22 PM

I doubt autozone or pepboys carries those. You need to go to the shops that sells professional paint.

b1adesofcha0s · 09-10-2012, 11:24 PM

Also try calling places instead of actually going there (if you're not already doing this). Would save a lot of time and unnecessary driving.

b1adesofcha0s · 09-10-2012, 11:44 PM

If anyone wants to stop by the Severn/Glen Burnie/Baltimore area I can get the paint and you can pick it up from me......or you can just stop by the Walmart Supercenter in Severn to get it yourself. I have confirmed the last two times I went there that they have it. I need to go there later this week anyway and I can pick up the paint if someone can pick it up from me. Still not sure whether I'm going or not.

eastwest2300 · 09-11-2012, 01:31 AM

DM, I got your paint.

eastwest2300 · 09-11-2012, 04:35 AM

Ok fellas, its 0530, Im still at work, about to get off in 30min. I just finished going through the entire thread, and PM'd everyone that said they'd like to attend with PM read reciepts.

Which was about 5 to 7 people. Hopefully we'll get atleast 3 to 4 cars to come out. I look forward to meeting up with everyone.

It would be very nice for someone that knows how to remove the bumper to show up at 0800 on Saturday, that would really help out BIG time.

eastwest2300 · 09-11-2012, 04:35 AM

Im gonna copy and paste this in the other thread as well.

dmhenderson · 09-11-2012, 08:37 AM

Ha ha didn't read this until now. No one needs any more paint. The girlfriend picked up 2 cans (there were only 2 left!) at Kensington hardware on her way into work. I think we have more than enough stuff now.

b1adesofcha0s · 09-11-2012, 09:08 AM

Well then looks like you don't need my help anymore with the paint. I'll see if I can stop by in the afternoon or evening to see how things are going. Be sure to post your progress in here, I really want to check these out when they're done.

dmhenderson · 09-11-2012, 09:59 AM

Dunno if we're going to get very far without someone who knows how to remove the front bumper without damaging it.

09-10-2012, 10:40 PM	#766 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,844 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Nevermind... its black, I just saw that. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

09-10-2012, 11:10 PM	#768 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	No problem man, we appreciate the advice __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

09-10-2012, 11:13 PM	#769 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	I like the look of it but they're asking $16 per paint can plus an additonal $16 (lol what) in shipping for 3-5 day delivery - which I don't have. I'll go with the krylon in the DIY thread since I have volunteers. __________________

09-10-2012, 11:19 PM	#771 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Well i'll check autozone and pep boys tomorrow but I doubt they have anything other than the "touch up" paint. __________________

09-10-2012, 11:24 PM	#773 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Also try calling places instead of actually going there (if you're not already doing this). Would save a lot of time and unnecessary driving. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

09-10-2012, 11:05 PM	#767 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 16	Sorry to be bumming in a different territory but I thought maybe I can help out a little bit with information. You guys should try out this paint, it is a Matte black finish yet it has a slight gloss to it. Here's the link! SEM Paints (SEM39143) Trim Black,Aerosol : Amazon.com : Automotive And a few picture of the actual housing painted using that product. Also, if your oven is slightly too small for the corner of the housing and is touching the oven don't sweat it! Wrap that part up with foil paper so it wouldn't melt. An important tip, make sure the paint is fully cured before baking it again because the last thing you would want is the chemical released from the paint and mess up your lens. Never wipe the inside the of the lens as that will scratch it up, once opened immediately wrap it up with cookie sheet or shrink wrap. Hope this helps! Good luck and have fun!

09-10-2012, 11:22 PM	#772 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 16	I doubt autozone or pepboys carries those. You need to go to the shops that sells professional paint.

09-10-2012, 11:44 PM	#774 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	If anyone wants to stop by the Severn/Glen Burnie/Baltimore area I can get the paint and you can pick it up from me......or you can just stop by the Walmart Supercenter in Severn to get it yourself. I have confirmed the last two times I went there that they have it. I need to go there later this week anyway and I can pick up the paint if someone can pick it up from me. Still not sure whether I'm going or not. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

09-11-2012, 01:31 AM	#775 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,844 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	DM, I got your paint. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

09-11-2012, 04:35 AM	#776 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,844 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Ok fellas, its 0530, Im still at work, about to get off in 30min. I just finished going through the entire thread, and PM'd everyone that said they'd like to attend with PM read reciepts. Which was about 5 to 7 people. Hopefully we'll get atleast 3 to 4 cars to come out. I look forward to meeting up with everyone. It would be very nice for someone that knows how to remove the bumper to show up at 0800 on Saturday, that would really help out BIG time. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

09-11-2012, 04:35 AM	#777 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,844 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Im gonna copy and paste this in the other thread as well. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

09-11-2012, 08:37 AM	#778 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Ha ha didn't read this until now. No one needs any more paint. The girlfriend picked up 2 cans (there were only 2 left!) at Kensington hardware on her way into work. I think we have more than enough stuff now. __________________

09-11-2012, 09:08 AM	#779 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Well then looks like you don't need my help anymore with the paint. I'll see if I can stop by in the afternoon or evening to see how things are going. Be sure to post your progress in here, I really want to check these out when they're done. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

09-11-2012, 09:59 AM	#780 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Dunno if we're going to get very far without someone who knows how to remove the front bumper without damaging it. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Texas headlight modification locations?	ccdominic	Texas	89	04-29-2013 09:37 AM
How fast have you driven your Z with or w/out modification?	Zoren 370	Nissan 370Z General Discussions	2	03-21-2012 10:17 PM
New to this... were should I go to post a question regarding headlight modification	Bubba	The370Z.com Feedback, Suggestions & Questions	1	03-14-2012 04:21 PM
Headlight modification	Bubba	Exterior & Interior	3	03-14-2012 08:57 AM
Lights Modification.	Kensi	Canada	6	07-20-2011 10:32 PM