Attn: Guys in the Mid-A with a STOCK 370z please come inside.

eastwest2300 · 05-02-2012, 01:35 AM

Randy, those tips look awesome, congrats man!

4r3s · 05-02-2012, 07:55 AM

Quote:

Originally Posted by FuszNissan

Wish these came on my AAM 2.5" Exhaust

x2

Somberlaine · 05-02-2012, 10:21 AM

Quote:

Originally Posted by Jon@AAMComp

You can hear a hint of GT-R in there I think. Either way, it left sounding much better than the way it came in.

Here's my shots:

--
Jon

very very nice randy. i so want.

ZCarMan · 05-02-2012, 11:12 AM

Quote:

Originally Posted by Roadster4Us

As someone recently told me when I asked about wheels

"Do it"

hahaha I'm going to have AAM look at my exhaust and see if it will work with their original 2.5 inch setup that I now have.

Adam@AAMComp · 05-02-2012, 11:13 AM

Quote:

Originally Posted by FuszNissan

Wish these came on my AAM 2.5" Exhaust

Lou this is in the works. Trying to round out our entire 370z exhaust line. Also some new fancy fabricated parts are in the works

-Adam

4r3s · 05-02-2012, 12:53 PM

Quote:

Originally Posted by Adam@AAMComp

Lou this is in the works. Trying to round out our entire 370z exhaust line. Also some new fancy fabricated parts are in the works

-Adam

Any chance of these tips being swapped out with the ones on my current setup which is AAM's 2.5" true dual exhaust?

Adam@AAMComp · 05-02-2012, 01:09 PM

We are waiting for more to come in. This was only a trial set of tips.

RandyD · 05-07-2012, 07:35 PM

BTW - i am getting a huge amount of positive attention on these tips... drawing crowds

ZCarMan · 05-08-2012, 07:08 AM

Quote:

Originally Posted by ZCarMan

hahaha I'm going to have AAM look at my exhaust and see if it will work with their original 2.5 inch setup that I now have.

I was at AAM Comp yesterday to drop off the Z for Pre-ZDayZ prep:

- change oil / check air filters on the long tube CAIs
- install Z1 Stainless break lines
- flush brake fluid, replace with Motul RBF-600
- flush and replace clutch fluid with the Motul
- check brake pads

I also had a retractable license plate holder installed on the Abarth as well. Thanks Dave it looks perfect!

While there I asked about the new AAM Comp Ti-tips and it appears that they should be able to fit them on the original AAM 2.5inch setup with perhaps a slight addition to match the length. They'll be taking measurements today when its up on the lift and let me know. Hopefully later today I'll have a definitive answer. The tips are several weeks from arriving so it'll be a bit but I'm in no rush, just glad to know they should work out on my original AAM exhaust.

Roadster4Us · 05-08-2012, 07:47 AM

Quote:

Originally Posted by ZCarMan

I was at AAM Comp yesterday to drop off the Z for Pre-ZDayZ prep:

- change oil / check air filters on the long tube CAIs
- install Z1 Stainless break lines
- flush brake fluid, replace with Motul RBF-600
- flush and replace clutch fluid with the Motul
- check brake pads

I also had a retractable license plate holder installed on the Abarth as well. Thanks Dave it looks perfect!

While there I asked about the new AAM Comp Ti-tips and it appears that they should be able to fit them on the original AAM 2.5inch setup with perhaps a slight addition to match the length. They'll be taking measurements today when its up on the lift and let me know. Hopefully later today I'll have a definitive answer. The tips are several weeks from arriving so it'll be a bit but I'm in no rush, just glad to know they should work out on my original AAM exhaust.

Good news Jon, they will look great.

Did you get the manual retractable plate holder or the electric version?

shadoquad · 05-08-2012, 07:52 AM

Quote:

Originally Posted by RandyD

BTW - i am getting a huge amount of positive attention on these tips... drawing crowds

Hopefully not this kind!

( Click to show/hide )

Adam@AAMComp · 05-08-2012, 08:11 AM

Quote:

Originally Posted by RandyD

BTW - i am getting a huge amount of positive attention on these tips... drawing crowds

Great to hear Randy!

GM_Traitor3.5 · 05-08-2012, 08:14 AM

Would love to get a set of these on my Max... would need to measure the outlet pipe diameter first though

Jon@AAMComp · 05-08-2012, 10:49 AM

Quote:

Originally Posted by ZCarMan

I was at AAM Comp yesterday to drop off the Z for Pre-ZDayZ prep:

- change oil / check air filters on the long tube CAIs
- install Z1 Stainless break lines
- flush brake fluid, replace with Motul RBF-600
- flush and replace clutch fluid with the Motul
- check brake pads

I also had a retractable license plate holder installed on the Abarth as well. Thanks Dave it looks perfect!

While there I asked about the new AAM Comp Ti-tips and it appears that they should be able to fit them on the original AAM 2.5inch setup with perhaps a slight addition to match the length. They'll be taking measurements today when its up on the lift and let me know. Hopefully later today I'll have a definitive answer. The tips are several weeks from arriving so it'll be a bit but I'm in no rush, just glad to know they should work out on my original AAM exhaust.

Italian supermodel not included lol

Car looks great though! That retractable license plate holder is very clean and discreet. Unless you were looking, it's hard to spot the subtle bracket under the front fascia when it's fully tucked. Jon, I'll get some shots of your car on it's own once we wrap everything up!

--
Jon

shadoquad · 05-08-2012, 11:25 AM

Quote:

Originally Posted by Jon@AAMComp

Italian supermodel not included lol
--
Jon

You never called me, or I'd have been there.

05-02-2012, 01:35 AM	#61 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,824 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Randy, those tips look awesome, congrats man! __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

05-02-2012, 01:09 PM	#67 (permalink)
Adam@AAMComp Base Member Join Date: Feb 2012 Location: Annapolis Junction, MD Posts: 183 Drives: 09 GT-R Rep Power: 13	We are waiting for more to come in. This was only a trial set of tips. __________________ Adam Correia AAM Competition AdamC@AAMCompetition.com AAM Competition Stage I Power Package

05-08-2012, 08:14 AM	#73 (permalink)
GM_Traitor3.5 A True Z Fanatic Join Date: Aug 2010 Location: Fairfax, VA Posts: 3,073 Drives: '13 GT/Brembo 6MT Rep Power: 21	Would love to get a set of these on my Max... would need to measure the outlet pipe diameter first though __________________ 2013 5.0 \| Brembo \| Steeda \| Koni \| Borla \| MGW \| TWM \| JLT \| UMI \| Whiteline \| Fays2 \| McLeod \| Redline Goods \| Redline Tuning \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Attn: turbo guys	blackonorange	Forced Induction	9	04-13-2012 09:06 AM
Has anyone peeled back a stock muffler and looked inside	Kastley85891	Intake/Exhaust	56	07-19-2010 08:14 PM
Attn Northern VA 370Z owners	carbonguy	Mid-Atlantic Region	14	04-29-2010 08:14 AM
Attn Melbournites! 6 days until 370z cruise!!	Majestik	Australia/New Zealand	5	08-16-2009 01:15 AM
ATTN Nissan Dealers: Click Here to Learn How You Can Post 370Z Inventory HERE	AK370Z	Nissan 370Z Dealer Inventory	0	01-11-2009 05:29 PM

05-07-2012, 07:35 PM	#68 (permalink)
RandyD A True Z Fanatic Join Date: Mar 2011 Location: Potomac Falls, VA Posts: 2,977 Drives: 2010 370z 7AT Roadst Rep Power: 20	BTW - i am getting a huge amount of positive attention on these tips... drawing crowds