zguynate

Good morning
I want buy uprev gt maf
Give me a message
Thank u

Hi a quick question do you ha e more pics of your car and the wheels i would really appreciate it.

Thanks for the info!! I really like those work cr

Thanks! I appreciate it although there isnt much done to it lol. Im lowered on Swift springs. I no longer have the wheels though. When I put them on the car the tire sizes were 245/40 all around on a 18x9.5 +12.

Hey nice car!!...I wanted to ask you what are the specs of the work kai?? Wheels that u put on your z? How tall are the sidwalls and if you are lowered, thanks. Im thinkin about putting some 18's on the future for my future z lol

just some more pics of the build twm short shifter and tomei exhaust with z1 test pipes...

next came the suspension i went with bc coilovers and z1 upper control arms and kentic rear camber and toe arms...

after fighting with the SPL solid diff bushings i finally got the diff back inhttp://uploads.tapatalk-cdn.com/20160422/4f04993954b7c699d2a22d8d881d52b6.jpg next i ran the lines for the ASD stand...

first 2 things i knew i had to cover is the yaw sensor and abs i went ahead and wired in switches so i can cut power to the yaw sensor and abs unit whenever i wanted...

i knew from the start i wanted to make this my comp car so i did not get one that was fully loaded. i drove it like this over the summer and when winter rolled around thats when tear down started ...

the day i got the car. 09 370z with 25k stock as a rock...

Heys Guys, I wanted to share a build that we are doing on our 2014 nismo 370Z which will be completed just in time for Zdayz this year. We purchased the vehicle back in october 2015 completely...

Take it to Z1

Picture doesn't show o up on my phone. For a good example, here's how my vacuum/pressure lines are routed. http://uploads.tapatalk-cdn.com/20160423/cca3b769152ac959557f25f964213bb8.jpg

When I used to race Yamaha R1's & R6's me and some buddies used to do that every year on the bikes. So much good riding up there.. I think at this point it would be a stretch for zdays but maybe...

that.......or you must remember some people are idiots. some may have bought the 70mm TBs not thinking that their intakes are only 2.5" where 70mm translates to 2.75" there may be a connection...

:tup:

Finally the parts needed to begin my build yet again.. Os Giken Twin Disk CP Rings Bearings ARP Main Studs

New owner in Collierville

Shows over people we have both agreed to delete our post. Please accept our apologies.. In the strange of things I feel we are making head-way..