![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Ventruck
Track Member |
Last Activity: 06-08-2024 12:45 AM
- User Lists
Visitor Messages
Showing Visitor Messages 1 to 2 of 2
-
One of the forum administrators, AK370Z, posted about the fog light install in 2009, including pictures. Post is dated 11-24-2009 and titled "DIY Fog light install with new harness for US-Spec 370Z + Radar harness w/pics.
-
Tried to reply to your PM but couldn't for some reason.
I tapped into the passenger seat heater switch. Found a diagram of the heater switch online and tapped into the 12V in for power. The Z Store harness is pretty complete and includes a relay so you only need 12V power and a 10 mm bolt to secure the ground wire. The switch is illuminated so I clipped the illumination power wire just below the plug and wired it into the heater switch illimination wire so it brightens and dims with the other interior switches. This step is not really necessary but I think it makes the switch look more like factory original. There is a good sized pass through from under the console into the cargo area and atcleast two grommets, at the rear below the tail lights, that can be used to route the harness out to where the fog light mounts. There are plenty of how-to's on this forum that describe how to remove the reflector and install the light.
Be careful pulling the switches out of the brackets under the cup holder as they are a little fragile.
Friends
Showing Friends 1 to 1 of 1
-
- Zingston
- A True Z Fanatic
Likes Received
682 Likes
-
Zingston liked post by Ventruck On thread : Anyone else notice the resale of the 370Z recently went up??I think a lot of things in general for starters are just being driven up in value when previously they wouldn't. Literally Pokemon cards had to get lifted from being sold from Target now....Liked On: 06-01-2021, 06:59 AM
Posted On: 05-31-2021, 10:20 PM*J*ap***V*et* liked post by Ventruck On thread : Injen Strut tower bar??Sounds like it may just be a customization. There's not much ways to reinvent the wheel with our strut bar, with the limited clearance between the engine cover (which is already profiled to clear...Liked On: 06-01-2021, 12:59 AM
Posted On: 05-31-2021, 11:00 PMdanegrey liked post by Ventruck On thread : 2021 Formula 1 ThreadOnly following highlights, but interesting race. Happy for Vettel. Really everyone in that top 5 had a great race. Mercedes had an off weekend and reading into Lewis' remarks is always a mixed...Liked On: 05-25-2021, 07:14 PM
Posted On: 05-23-2021, 12:43 PMZCanadian liked post by Ventruck On thread : 2021 Formula 1 ThreadDriveshaft was another story. Not really sure why anyone would be mad at him/Ferrari specifically. All jokes aside, there isn't really anything favorable about binning the car like that in attempt...Liked On: 05-25-2021, 11:52 AM
Posted On: 05-23-2021, 09:35 AMZCanadian liked post by Ventruck On thread : 2021 Formula 1 ThreadThat's right! My boy, Charles LeClerc. Hometown pole! Putting Ferrari on his back. Order 66, seal the deal. Crash the car so no one can put in a hot lap after! Pro expert move. But really, we...Liked On: 05-25-2021, 11:50 AM
Posted On: 05-22-2021, 02:33 PMHotrodz liked post by Ventruck On thread : 2021 Formula 1 ThreadOnly following highlights, but interesting race. Happy for Vettel. Really everyone in that top 5 had a great race. Mercedes had an off weekend and reading into Lewis' remarks is always a mixed...Liked On: 05-25-2021, 10:48 AM
Posted On: 05-23-2021, 12:43 PMHotrodz liked post by Ventruck On thread : 2021 Formula 1 ThreadDriveshaft was another story. Not really sure why anyone would be mad at him/Ferrari specifically. All jokes aside, there isn't really anything favorable about binning the car like that in attempt...Liked On: 05-25-2021, 10:48 AM
Posted On: 05-23-2021, 09:35 AMZontheRocks liked post by Ventruck On thread : 2021 Formula 1 ThreadDriveshaft was another story. Not really sure why anyone would be mad at him/Ferrari specifically. All jokes aside, there isn't really anything favorable about binning the car like that in attempt...Liked On: 05-24-2021, 09:50 PM
Posted On: 05-23-2021, 09:35 AMaxmea? liked post by Ventruck On thread : 2021 Formula 1 ThreadOnly following highlights, but interesting race. Happy for Vettel. Really everyone in that top 5 had a great race. Mercedes had an off weekend and reading into Lewis' remarks is always a mixed...Liked On: 05-24-2021, 06:05 PM
Posted On: 05-23-2021, 12:43 PMredondoaveb liked post by Ventruck On thread : Another Z sent to heaven.Hope for the best on your next adventure.Liked On: 05-24-2021, 09:21 AM
Posted On: 05-24-2021, 12:31 AMDLSTR liked post by Ventruck On thread : 2021 Formula 1 ThreadOnly following highlights, but interesting race. Happy for Vettel. Really everyone in that top 5 had a great race. Mercedes had an off weekend and reading into Lewis' remarks is always a mixed...Liked On: 05-23-2021, 02:00 PM
Posted On: 05-23-2021, 12:43 PMDLSTR liked post by Ventruck On thread : 2021 Formula 1 ThreadDriveshaft was another story. Not really sure why anyone would be mad at him/Ferrari specifically. All jokes aside, there isn't really anything favorable about binning the car like that in attempt...Liked On: 05-23-2021, 10:20 AM
Posted On: 05-23-2021, 09:35 AMZontheRocks liked post by Ventruck On thread : 2021 Formula 1 ThreadThat's right! My boy, Charles LeClerc. Hometown pole! Putting Ferrari on his back. Order 66, seal the deal. Crash the car so no one can put in a hot lap after! Pro expert move. But really, we...Liked On: 05-22-2021, 08:43 PM
Posted On: 05-22-2021, 02:33 PMHotrodz liked post by Ventruck On thread : 2021 Formula 1 ThreadvZrsUnX4rVs Mercedes openly sharing their information hoping other teams get better to actually start giving them competition. But really — I'm not qualified for it —but from what it seems, I'd...Liked On: 05-14-2021, 09:00 AM
Posted On: 05-13-2021, 12:03 AMDLSTR liked post by Ventruck On thread : 2021 Formula 1 ThreadvZrsUnX4rVs Mercedes openly sharing their information hoping other teams get better to actually start giving them competition. But really — I'm not qualified for it —but from what it seems, I'd...Liked On: 05-13-2021, 10:17 AM
Posted On: 05-13-2021, 12:03 AM
All times are GMT -5. The time now is 09:47 PM.