thangcu35

Did you ever get around to making a DIY thread or video on your Typhoon -> CAI conversion? I just came across your thread and I would love to do this myself but I'm wondering if and where I could find more detailed information, thanks.

Rewelded the Y pipe. Transition is much smoother and welds are fairly decent looking. Also deleted resonators. Here's a sound clip I recorded. I had to hear how it sounds from the outside. ...

The reason why its grinding is because the fluid is still too thick when its cold. Synchronizer's job is to grab the gears to match the output/input shaft speed and thick fluid delays the time it...

1st and 2nd gear ~ 70% throttle with traction control on. Running off wastegate pressure around 9-10 psi (dont have gauge to verify). Timing is fairly conservative at 17. Got air fuel to be around...

1st and 2nd gear ~ 70% throttle with traction control on. Running off wastegate pressure around 9-10 psi (dont have gauge to verify). Timing is fairly conservative at 17. Got air fuel to be around...

Got a chance to drive through Stone Mountain park in Georgia and snapped a couple of pictures. ...

Hi, I'm relatively a new member here. I bought my 2012 Sport/Tour/Nav 370z back in May 2014 and I've pulled the trigger to make my own twin turbo kit. I've been building engines/turbo kits for a...

1st and 2nd gear ~ 70% throttle with traction control on. Running off wastegate pressure around 9-10 psi (dont have gauge to verify). Timing is fairly conservative at 17. Got air fuel to be around...

1st and 2nd gear ~ 70% throttle with traction control on. Running off wastegate pressure around 9-10 psi (dont have gauge to verify). Timing is fairly conservative at 17. Got air fuel to be around...

Top speed pro 1. I dont recommend this exhaust to anyone since fitment was shitty, the driver side tip sat 1.5" lower than the passenger. I had to reweld the hanger to get the height even on both...

Well boys, shes back down on the ground and I went for a quick spin off boost. Needless to say Im thrilled this project is coming close to be done. More pictures are on the way later. ...

Well boys, shes back down on the ground and I went for a quick spin off boost. Needless to say Im thrilled this project is coming close to be done. More pictures are on the way later. ...

No real update, just a couple of pics for viewing pleasure. I finished welding up the down pipes today. The other one shows how much of a tight fit with the filter on. ...

:wtf2: Don't get them started on that again lol.

Both turbos test fitted. I redid the driver side and got the wastegate actuator to a safer clearance at the cost of clearance to chassis. The passenger side is about the same height and they...

I think Im one of the lucky guys that has a tolerant wife. Not only that she buys me car parts for Christmas! Top speed pro 1 will be used for the turbo back. I will have to shorten it a bit to make...