Nissan 370Z Forum - Spartan 1771's Album: Dual Oil Catch Cans

Nissan 370Z Forum

370Z Forums HOME

My Picture Album

Nissan 370Z Pictures

Premium Membership

Become a Forum Sponsor

		Nissan 370Z Forum > All Albums > Spartan 1771's Profile > Albums
Dual Oil Catch Cans

Dual Oil Catch Cans

Dual oil catch cans installed with the Motordyne M370 upper air intake manifold.

Driver's side can and lines.

Passenger's side can and lines.

Dual catch can system install complete. This set-up looks so much better then the single can set-up.

Thought I would try a single can setup. I hated the way it looked, so I'm sticking with my original plan and installing two cans.

I originally thought I would use the stock air box mounting points to mount the cans, but the gen 3 intake tubes rubbed up against them, so I had to...

The intake tube is too close and rubs on the can, which wasn't good. I had to come up with an alternate mounting point.

The intake tube is too close and rubs on the can, which wasn't good. I had to come up with an alternate mounting point.

Mount installed.

Both cans prepped.

Teflon tape applied.

O-ring installed.

O-Ring inserted.

Dipstick and O-ring.

Filter media inserted and baffle reinstalled.

Stainless steel filter media inserted in to the baffle top.

Stainless steel filter media and baffle top.

Baffle opened.

Interior showing the baffle, which can be unscrewed and filter media can be inserted.

Separated showing the interior baffle and the dipstick

Can mount

Inlet and outlet

All times are GMT -5. The time now is 12:27 AM.