redondoaveb

Hey man, love your build! You've inspired me to build mine! I'm going to go for a Tomei with cat deletes and maybe some red JNC wheels like yours!

Hey brotha,

Currently installing the topgunz SC kit, and going the route of installing a external wastegate to help with in cabin boost control...Saw on one of the threads you went the same route...you happen to have a picture or explanation of this? just dont want to cut into the wrong piping if their is a better placement as its pretty tight in our bay with this kit

What size is your walbro fuel pump?

Hello, you said you followed me on Insta, what is your instagram?

Which Southbend Clutch are you running, and would you recommend it for a daily driver? I am ordering parts for my ACE Supercharger set up, and I am having a hard time with picking a clutch. I will be running e-85 and anticipate getting 420-460 rear wheel torque. I have a 10 mile daily commute in Chicago traffic.

Hey man, I finally received the switch. I have a question about your wiring. It's been a while since my electronics class so, bear with me. How did you wire up the switch to enable the halo light as well?

I'm guessing Common is connected to one end of the spliced Yaw Sensor Wire, and the other end is connected to Normally Closed. How did you wire up the halo light on the switch? Thanks for any help.

I just bought Elmos FI 3" CF cans exhaust, it is buried in MAM's shop.

Dont you have some exhaust v-bands you need to be doing?

The color swatch and the color that the wrench turned out are spot on matches. Hope the other colors are the same.

I have the next 11 days off so I decided I would start it off by learning to powdercoat. Pretty simple process. I sprayed a coilover spanner wrench and gave it a shot of racing red from...

Picked up a Raceseng Vision knob in Red Translucent and a Tow hook in black/grey. Swatches from Prismatic powders came in also so I might start looking for a set of calipers I can get powder coated...

And tonight’s featured special “Reprisal” :tup:

incoming duude.

I'd still be working on the first splice :rofl2:

OP. Are you looking for an ACE kit?

If anyone is looking to buy body armor. It will take a minimum of 12 weeks to get it. Some places are saying 16 weeks. There is that much of a demand for it right now.

If I was still at Elliott. I could get you all the heat tape you wanted.

When I worked at Elliott TurboMachinery. We had a 100 ton overhead crane in the shop. We would routinely lift 130 to 140 tons with it. When we lifted anything at 100 tons or over. We would chase...

At the power plant. We had an operator named Dewhite. Dewhite was a BIG boy. Bigger then JC. Stood 6'6", 395lbs. He hated heights in the worse way. His goal was to be at 400 or a little over 400 lbs...

I would post something but I don't want someone to take it the wrong way and call the law. :roflpuke2::roflpuke2::roflpuke2:

It was a really hard name to remember :icon17: stupid broke crane stressing me out :icon14: High Temp Masking Supplies https://hightempmasking.com/ You will need silicone plugs and tape for...