R1talin

Hey what color wire did you wire the turn signal halo too?

Hi, assuming you are referring to the resistors for the turn signal hyper flash, yes i soldered them into the turn signal wire outside of the headlight housing, then heat shrink and zip tied them out of the way.

Hi
Just reading up on some comments on the quad halo headlight you did.
Where abouts did you mount your resistors? Looking at mounting the resistors outside the housing but not entirely sure which one.

Worked on replacing the no nav bose. DS18 6.5 components, tweeters in the dash, Kenwood wireless android auto hu, ran wires for rear speakers and amp but that's it for this weekend took 10 hrs with...

thats a very nice setup you have there man. good job.:tup:

Thanks for the great feedback guys, I wasn't aware you had to cut metal to install Z1 kit. Also, I know the Carizon channel, that dude is just great. Because of his detailed approach to the LSD...

OP If you are wanting a video breakdown of things - a local guy did the install on the TopGun kit and I believe he eventually went with the upgraded kit when it came out as well. From what I...

I did not see a DIY for these, if there is just delete this thread!(I hope not...) We are having a few mild winter days here is PA so I brought the Z out of hibernation and down to work(since I was...

You can buy a module from Kahtec Technologies International (http://kahtec.com/) and splice it into your fog light. Then it will blink.

Also designed some simple 3d printed TPU inserts to fix the hatch springs. Now only need to push the button...

Designed some caps to be 3d printed for the stock strut tower bolts and eather be painted or like i did hand layed real carbon...

Nice! Just had mine tuned last weekend as well. AAM resonated short tails and test pipes, Z1 cold air intake. Baseline was 317whp and 250 torque. Final numbers were 347whp and 280 torque. Who did you...

Tuned with ecutek on 93 yesterday. Relative mods: FI CBE, z1 silicone intake hoses, afe pro dry filters Base, 282 Mods, 307 After tune, 320 :driving:

Check both your front and rear turn signal bulbs. If they are LED bulbs, insert the appropriate value resistors and problem solved.

Any LEDs anywhere on your car (except maybe the interior) will cause hyperflash. I got sick of it, pulled all the LEDs out and it flashes normal now.

Just did my stock cat swap with my Berk HFC. And boy was this a tough DIY. Cracked those demon bolts like a boss. I feel like superman after this mod hah :happydance: Don't see any newer recent...

I have a 2018 sport with bose. No nav. I have a brainiac kit and am planning to go brainiac -> spdif -> jl audio amp. I have heard about bose wiring causing issues to some people? Is that...

Installed Mine’s front and rear carbon goodies https://uploads.tapatalk-cdn.com/20220514/6e48f8454cee1956292006a470a90ada.jpg...