jrb55gh

JRB,

As you may or may not know, the Ecutek advanced RaceRom features for the Z are now out. Joe at Dynotronics is looking for a test car to run the features.

Would you be interested? If so, please contact Joe directly.

Let me know.

Thanks.

Here is a link to a thread that has pictures of pan depth measurements: ...

Agreed, flow bench matching in production would be cost prohibitive. Based on some experience I have had in the far past with v8 manifold porting there are probably some areas in every upper and...

I know it would be a lot of extra work, but it might be important to know the flow of each port through the whole assembly including throttle bodies. The idea is to make each port in the assembly...

The 370z oil change interval has been shortened in recent years. The service and maintenance guide provided with the 3013 370z owners manual specifies 3750 mile oil change interval.

The R2C's seal out hot engine bay air better than other short ram intakes. It is more like a cold air intake in that way.

The R2C's seal out hot engine bay air better than other short ram intakes. It is more like a cold air intake in that way.

I read your whole thread. Getting verifiable results to prove your concept with minimal investment is a tough assignment. But you did it. Thanks for all seeing it through to a usable conclusion. ...

The data logs on my Ecutec tuned completely stock 2013 z show the 121g/s at 3200 rpm and peak 268 g/s at 6200 rpm to redline. It appears that your intake mods allow more air flow at a given rpm until...

I bought an etune and cable for my 2013 7AT from Dynotronics in March 2014. After several email iterations to fix the dreaded throttle hesitation and get the throttle response adjusted to my...

My factory Yokohama Advan rears are gone at 17k miles. The fronts will go another 6k miles. I am looking for a good mid priced street tire for my 2013 base Z with the stock 18” wheels. The...

Thanks Guys. I'll probably go with the RE760 rears for now and then switch to a full set of the S04's when its time to replace all.

I am looking for a used R2C intake for 2013 370z in good condition with or without filters. PM me. Thanks.

Here is an ECUtek data log for a full throttle pull through 3rd gear on my stock 370z 7AT. The injector duty cycle at about 7300 rpm shows at 86% which is about correct for the indicated injector...

"Can you post the hexadecimal code for the map, both the first (1:1) vs he one you arrived at?" I am not sure that I can get that code. I do not have the tuner version of the software. I will ask...