Nissan 370Z Forum  

Go Back   Nissan 370Z Forum > Indiana102


Conversation Between Indiana102 and Like_a_boss
Showing Visitor Messages 1 to 2 of 2
  1. Indiana102
    05-05-2013 01:32 PM - permalink
    Indiana102
    I took apart the center dash, where the radio and a/c controls are, and I wired my LEDs to the passenger airbag light. This worked just fine, however, once I plug the switch back into the airbag light port, the LEDS no longer work. Where exactly did you wore yours into? I'd like for mine to only come on when I turn on the headlights. Thanks for the help so far!
  2. Like_a_boss
    05-01-2013 11:06 AM - permalink
    Like_a_boss
    The paint for the handles I would suggest removing them first, I know little about paint so I have a shop do my paint work I just gave them the color code, year, make and they went to work.
    As far the leds I did wire them myself, I removed the center console for running the wires to the oem switch panel. the led's were just simple foot long flexible led tubes from auto zone there is a flat ridge under the dash that you can attach them to I opted for adhisive over the double sided tape and I drilled two small holes and zip tied in place just in case. In the trunk and the dome lights I replaced the stock bulbs for plasma glow led light panels crazy bright. Hope this helps a little, good luck with your mods!

All times are GMT -5. The time now is 10:30 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2