AnthonyD1978

Hey Anthony. Did you ever get that unit installed for the fuel starvation issue? I ordered it but it's still sitting in the box in my garage. Life has been extremely busy for me the past few years and I hardly even drove the Z at all. But I want to install it now. After dealing with the key fob issue. It happened to me today. Went out to start the car and nothing. After looking on the forum here, it looks like it's a very common problem. Haven't had a chance to read about it in detail yet. What a hassle. I had to tow it home and tomorrow probably tow it to the dealer...

I spotted this car a couple times around Anaheim in the past month. It now has a 2015 Nismo front bumper. Slammed but still looking clean.

One thing that John uses that sets him apart from others is his Tuner Assist software. It's very convenient for customers to manage their tunes and logs during the eTune process. I'm currently...

7/11 - John stated that my fueling is different from bank to bank. He requested I run the "Idle Learning" tool in Ecutek. Ran it with no issues. Logged a few runs and sent it to him. Also I noticed...

7/11 - John stated that my fueling is different from bank to bank. He requested I run the "Idle Learning" tool in Ecutek. Ran it with no issues. Logged a few runs and sent it to him. Also I noticed...

Just want to post this up to share my experience with EcuTek and Visconti as I go through the tuning process. I've never worked with either product or person and I just picked up my Z back in April....

Yeah, we have to pull the yaw sensor to fully disable traction control. Otherwise if you have oversteer or understeer in a turn and try to use the brakes to correct your angle the car goes into "ice...

Yes, please include the chart in the install guide or post here please! Thank you! Thanks for the clarification on the level sensor. I will make sure to bend baffle a little "extra" :tup: With...

1: Spec Jay 2: 1cleanZ 3: AnthonyD1978 - PAID 4: tracyx`9 5: D.B. 6: GSS138 7: a.stewart4242 8: J.L. 9: Arrvaxx 10: CANCELED

Just want to post this up to share my experience with EcuTek and Visconti as I go through the tuning process. I've never worked with either product or person and I just picked up my Z back in April....

Just want to post this up to share my experience with EcuTek and Visconti as I go through the tuning process. I've never worked with either product or person and I just picked up my Z back in April....

Newly installed over the last few days. Car is almost up to my initial expectations for track spec. Just waiting on RRP now to head off fuel starvation. ...

I'm running all SPL, but that's because I plan on tracking the car. SPC will probably be fine for street duty. Here is mine I picked up back in April. Still have some work to do before my first track...

Just want to post this up to share my experience with EcuTek and Visconti as I go through the tuning process. I've never worked with either product or person and I just picked up my Z back in April....

Just want to post this up to share my experience with EcuTek and Visconti as I go through the tuning process. I've never worked with either product or person and I just picked up my Z back in April....

I'm running all SPL, but that's because I plan on tracking the car. SPC will probably be fine for street duty. Here is mine I picked up back in April. Still have some work to do before my first track...

I'm running all SPL, but that's because I plan on tracking the car. SPC will probably be fine for street duty. Here is mine I picked up back in April. Still have some work to do before my first track...