2015 Nismo Build

fmayi1101 · 01-30-2017, 09:43 AM

Car is sick nice job.

nismo350z370z · 01-31-2017, 07:40 AM

Great build on the Z! What performance mods have you done so far to get your dyno numbers? Look forward to more on your build. Thanks

P's_Z · 01-31-2017, 05:30 PM

Your Z=

NismozZz · 01-31-2017, 07:51 PM

Those wheels look great.

DPE G · 01-31-2017, 07:57 PM

Quote:

Originally Posted by nismo350z370z

Great build on the Z! What performance mods have you done so far to get your dyno numbers? Look forward to more on your build. Thanks

At the time of the dyno mods included were Stillen Gen3 Intakes, Motordyne ART test pipes and Motordyne E370 Exhaust.

pilot500 · 02-01-2017, 08:37 PM

best wheels I ever saw. will those wheels fitstock suspension without rolling the front fender and what were thesize' those are greatest wheel I love the deep dish ' wondering what something like that cost

OptionZero · 02-01-2017, 09:12 PM

with enough camber, it should be fine depending on height. but there's no reason not to roll the fender, its not that hard for any equipped shop

You should contact DPE wheels if you want them:
CONTACT

No inside knowledge, but i'd expect four figures per wheel. These are three piece and forged. DPE G is running the "ESS" wheel from their Elite line

DPE G · 02-02-2017, 07:05 AM

All of the above is corrrect. My camber is at -2 all around. The fronts are rolled and bumper brackets trimmed.

If you want some pricing and more specifics shoot me a PM.

EternalDragon · 02-02-2017, 08:12 AM

love the build beautiful z!

Volk Z · 02-03-2017, 10:43 PM

I have the same offset and tire set up and I could use your input.
Do you have your alignment specs by chance? I am wondering what I need to run for camber.
Also I was thinking I need to trim the bump out in the front fender and a roll.

I'm also torn if I want to keep the flares. I trimmed the rear ones so they work with the stance.

Any input from you would be appreciated for getting rid of the rubbing.

OptionZero · 02-03-2017, 11:38 PM

Throw your flares away, they're garbage. They reduce clearance and they're ugly "fake flares" anyways.

Rear depending on height i'm betting -2 will do it. I am running 20x12 +20 with a 315/25. DPE_G is running 20x11 +0 with a 285/30 (a slight stretch, extends out a few mm further than mine). I got away with -2. There is a ton of space in back.

Fronts, assuming you are also at 20x9.5 +17 is only a 5mm further than the generic 19x9.5 +22 size that every run uses for their te37's. They are at stock suspension, so i can't imagine you need more than a half degree or so more than stock.

Depending on height you'll need to trim or relocate the front bumper tab

EDIT:
Refer to iBenjamm1n's thread HERE

He is running 265/35 on a 19x9.5 +17 front at -1.7 camber on the silver works

For his bronze works he ran 19x11 +0 rear with a 295/30 at -3.5deg camber. this is alot of camber but he is running a pretty meaty tire. Go down to a 285 or even 275 and i bet you can get it under -3

The easy solution?
Call SPL. Buy all their adjustable arms. Go to your performance suspension shop, have them roll your fronts, throw away the flares (or give them to cooltoy). Give them your wheels, and tell them to make it fit. Never have to worry about rubbing again!

JC-Nismo · 02-04-2017, 05:09 AM

Dam, what the hell is that bolt made of, DIAMONDS, LMFAO....................
Love the car car man, still looking good Bro.

Volk Z · 02-04-2017, 05:39 PM

Quote:

Originally Posted by OptionZero

Throw your flares away, they're garbage. They reduce clearance and they're ugly "fake flares" anyways.

Rear depending on height i'm betting -2 will do it. I am running 20x12 +20 with a 315/25. DPE_G is running 20x11 +0 with a 285/30 (a slight stretch, extends out a few mm further than mine). I got away with -2. There is a ton of space in back.

Fronts, assuming you are also at 20x9.5 +17 is only a 5mm further than the generic 19x9.5 +22 size that every run uses for their te37's. They are at stock suspension, so i can't imagine you need more than a half degree or so more than stock.

Depending on height you'll need to trim or relocate the front bumper tab

EDIT:
Refer to iBenjamm1n's thread HERE

He is running 265/35 on a 19x9.5 +17 front at -1.7 camber on the silver works

For his bronze works he ran 19x11 +0 rear with a 295/30 at -3.5deg camber. this is alot of camber but he is running a pretty meaty tire. Go down to a 285 or even 275 and i bet you can get it under -3

The easy solution?
Call SPL. Buy all their adjustable arms. Go to your performance suspension shop, have them roll your fronts, throw away the flares (or give them to cooltoy). Give them your wheels, and tell them to make it fit. Never have to worry about rubbing again!

Thanks a lot!!
I was going to trim the fender liner bump out tomorrow.

Your post was a ton of help!

Volk Z · 02-04-2017, 06:51 PM

I'm trying to figure out why my OEM Nismo wheels with a 25mm spacer (10.5 -2 offset) with the same width tire is much more aggressive... your rear should be almost the same if not more aggressive.
My only thought is you are running a good amount of camber in the rear..

Did you add camber after being lowered?

DPE G · 02-04-2017, 07:16 PM

Quote:

Originally Posted by OptionZero

Throw your flares away, they're garbage. They reduce clearance and they're ugly "fake flares" anyways.

Rear depending on height i'm betting -2 will do it. I am running 20x12 +20 with a 315/25. DPE_G is running 20x11 +0 with a 285/30 (a slight stretch, extends out a few mm further than mine). I got away with -2. There is a ton of space in back.

Fronts, assuming you are also at 20x9.5 +17 is only a 5mm further than the generic 19x9.5 +22 size that every run uses for their te37's. They are at stock suspension, so i can't imagine you need more than a half degree or so more than stock.

Depending on height you'll need to trim or relocate the front bumper tab

EDIT:
Refer to iBenjamm1n's thread HERE

He is running 265/35 on a 19x9.5 +17 front at -1.7 camber on the silver works

For his bronze works he ran 19x11 +0 rear with a 295/30 at -3.5deg camber. this is alot of camber but he is running a pretty meaty tire. Go down to a 285 or even 275 and i bet you can get it under -3

The easy solution?
Call SPL. Buy all their adjustable arms. Go to your performance suspension shop, have them roll your fronts, throw away the flares (or give them to cooltoy). Give them your wheels, and tell them to make it fit. Never have to worry about rubbing again!

Pretty much nailed it all around. I run -2 front and rear just to keep them the same, could have gotten away with less, may try to stuff a 295 in it when the time comes as well.

01-31-2017, 05:30 PM	#138 (permalink)
P's_Z A True Z Fanatic Join Date: Apr 2013 Location: PR Posts: 1,530 Drives: Zeta Rep Power: 468	Your Z= __________________ Zeta

02-01-2017, 08:37 PM	#141 (permalink)
pilot500 Base Member Join Date: Nov 2016 Location: ohio Posts: 1 Drives: mr2 Rep Power: 8	best wheels best wheels I ever saw. will those wheels fitstock suspension without rolling the front fender and what were thesize' those are greatest wheel I love the deep dish ' wondering what something like that cost

02-01-2017, 09:12 PM	#142 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	with enough camber, it should be fine depending on height. but there's no reason not to roll the fender, its not that hard for any equipped shop You should contact DPE wheels if you want them: CONTACT No inside knowledge, but i'd expect four figures per wheel. These are three piece and forged. DPE G is running the "ESS" wheel from their Elite line __________________ OptionZero Build Thread

02-02-2017, 07:05 AM	#143 (permalink)
DPE G Track Member Join Date: Apr 2012 Location: Pensacola FL Posts: 747 Drives: 2015 PW Nismo Tech Rep Power: 303	All of the above is corrrect. My camber is at -2 all around. The fronts are rolled and bumper brackets trimmed. If you want some pricing and more specifics shoot me a PM. __________________ \| 2015 Nismo \| DPE \| AirLift \| SPL \| StopTech \| Toyo \| Motordyne \| Tommy Kiara \| Amuse \| ARC \| Top Secret \| Stillen \| Hotchkiss \|

02-02-2017, 08:12 AM	#144 (permalink)
EternalDragon Base Member Join Date: Sep 2016 Location: Orlando, FL Posts: 39 Drives: 16 Nissan 370z S M6 Rep Power: 8	love the build beautiful z! __________________ "There is no greater danger than underestimating your opponent" - Laozi

01-30-2017, 09:43 AM	#136 (permalink)
fmayi1101 Base Member Join Date: Jul 2011 Location: Florida Posts: 68 Drives: 2010 NISMO 370Z Rep Power: 13	Car is sick nice job.

01-31-2017, 07:40 AM	#137 (permalink)
nismo350z370z Base Member Join Date: Jan 2017 Location: florida Posts: 8 Drives: 16 370z nismo white Rep Power: 8	Great build on the Z! What performance mods have you done so far to get your dyno numbers? Look forward to more on your build. Thanks

01-31-2017, 07:51 PM	#139 (permalink)
NismozZz Base Member Join Date: Jan 2017 Location: New York Posts: 158 Drives: 16 370z Nismo Rep Power: 8	Those wheels look great.

02-03-2017, 10:43 PM	#145 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3065	I have the same offset and tire set up and I could use your input. Do you have your alignment specs by chance? I am wondering what I need to run for camber. Also I was thinking I need to trim the bump out in the front fender and a roll. I'm also torn if I want to keep the flares. I trimmed the rear ones so they work with the stance. Any input from you would be appreciated for getting rid of the rubbing. __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

02-03-2017, 11:38 PM	#146 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Throw your flares away, they're garbage. They reduce clearance and they're ugly "fake flares" anyways. Rear depending on height i'm betting -2 will do it. I am running 20x12 +20 with a 315/25. DPE_G is running 20x11 +0 with a 285/30 (a slight stretch, extends out a few mm further than mine). I got away with -2. There is a ton of space in back. Fronts, assuming you are also at 20x9.5 +17 is only a 5mm further than the generic 19x9.5 +22 size that every run uses for their te37's. They are at stock suspension, so i can't imagine you need more than a half degree or so more than stock. Depending on height you'll need to trim or relocate the front bumper tab EDIT: Refer to iBenjamm1n's thread HERE He is running 265/35 on a 19x9.5 +17 front at -1.7 camber on the silver works For his bronze works he ran 19x11 +0 rear with a 295/30 at -3.5deg camber. this is alot of camber but he is running a pretty meaty tire. Go down to a 285 or even 275 and i bet you can get it under -3 The easy solution? Call SPL. Buy all their adjustable arms. Go to your performance suspension shop, have them roll your fronts, throw away the flares (or give them to cooltoy). Give them your wheels, and tell them to make it fit. Never have to worry about rubbing again! Volk Z likes this. __________________ OptionZero Build Thread Last edited by OptionZero; 02-03-2017 at 11:47 PM.

02-04-2017, 05:09 AM	#147 (permalink)
JC-Nismo A True Z Fanatic Join Date: Sep 2014 Location: Atlanta Posts: 1,244 Drives: 2011 Nismo 370z Rep Power: 12	Dam, what the hell is that bolt made of, DIAMONDS, LMFAO.................... Love the car car man, still looking good Bro.

02-04-2017, 06:51 PM	#149 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3065	I'm trying to figure out why my OEM Nismo wheels with a 25mm spacer (10.5 -2 offset) with the same width tire is much more aggressive... your rear should be almost the same if not more aggressive. My only thought is you are running a good amount of camber in the rear.. Did you add camber after being lowered? __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2015 Nismo	Zed-Hed	Nismo 370Z	420	12-15-2016 12:04 PM
[WTB] WTB set of 2015 NISMO Wheels!	GTLAW	Parts for sale (Private Classifieds)	1	01-09-2015 03:32 PM
2015 Nismo	roadrash666	Nissan 370Z General Discussions	31	10-04-2014 01:07 AM
New 2015 Nismo Z video	SlikNik	Nissan 370Z Photos / Spyshots / Video / Media Gallery	4	06-11-2014 10:03 PM