![]() |
Hi guys thought I would share my build with you I have been at it for about 6 months now. Enjoy Also follow the build on Instagram @camcam1616 Day one
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Base Member
Join Date: Aug 2013
Location: Utah
Posts: 129
Drives: 09 370z touring 6sp
Rep Power: 11 ![]() ![]() ![]() |
![]()
Hi guys thought I would share my build with you I have been at it for about 6 months now. Enjoy
Also follow the build on Instagram @camcam1616 Day one of ownership. My 09 touring 37k miles ![]() ![]() By the third day I had my new bc racing coilovers and my weds from my previous 04 350z. ![]() ![]() ![]() ![]() Sent from my iPhone using Tapatalk |
![]() |
![]() |
#4 (permalink) |
Base Member
Join Date: Aug 2013
Location: Utah
Posts: 129
Drives: 09 370z touring 6sp
Rep Power: 11 ![]() ![]() ![]() |
![]()
After having the car static for close to 2 months and having to daily the car like that was a pain in my *** so I decided I wanted bags. So after hours and hours of research, I had decided to just convert my bc coilovers to a bag-over setup. I decided to go with bagriders.com they had a great kit and had some awesome customer service. I ended up doing the accuair elevel set up for management and the aero sport bags from UA.
Install was pretty simple. Aside from wiring which is my weakness. I don't know **** about it. ![]() ![]() ![]() Got most of the lines ran and the wiring done. ![]() Got all my stuff run now I just needed to ad the bags in and the elevel sensors ![]() The next day I had a buddy help me with my elevel sensors. ![]() ![]() Also got my tank set up for temporary ![]() Car lays out on all four corners ![]() |
![]() |
![]() |
#7 (permalink) |
A True Z Fanatic
Join Date: Mar 2013
Location: Massachusetts
Posts: 1,400
Drives: 09 370Z MT6
Rep Power: 666 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Price for air bag setup?
__________________
fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™
|
![]() |
![]() |
#8 (permalink) |
Base Member
Join Date: Aug 2013
Location: Utah
Posts: 129
Drives: 09 370z touring 6sp
Rep Power: 11 ![]() ![]() ![]() |
![]()
Sold my weds and bought another set of kranze lxz
19x10.5 -24 5.5 inch lip 19x12 -54 7.5 inch lip ![]() ![]() ![]() And for the test fit..... Well it didn't go well. They not only didn't clear my brakes but after adding a spacer to clear my bbk they now didn't clear the fenders So after a 25mm spacer in the front and a 5mm in the rear the new specs were 19x10.5 -49 19x12 -59 ![]() ![]() The front aired out poked 2 3/4 inches. After adding a spc camber kit. It didn't help at all. ![]() And the rear ![]() ![]() ![]() ![]() |
![]() |
![]() |
#10 (permalink) |
Track Member
|
![]()
Damn bro im in the wrong business.. Wth do you do if you dont mind me asking
Sent from my SPH-L710 using Tapatalk 2
__________________
[B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels |
![]() |
![]() |
#11 (permalink) |
Base Member
Join Date: Aug 2013
Location: Utah
Posts: 129
Drives: 09 370z touring 6sp
Rep Power: 11 ![]() ![]() ![]() |
![]()
Over the next few weeks I put tires and a camber kit in to see if I can just full the sh*t out of the fenders and make it happen. That too didn't work. I wasn't getting enough camber aired out and I wasn't getting enough pull due to the way the inner fender well in in the rear of the z. It won't allow for that much pull without cutting and rewelding.
![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
#13 (permalink) |
Premium Member Bitches
![]() Join Date: Jan 2012
Location: SoCal
Posts: 14,824
Drives: a lot
Rep Power: 17151 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
... Did you think the wheels would fit when you bought them? Lol
__________________
Do YOU want to know what/where I got my username from?
( Click to show/hide )
|
![]() |
![]() |
#14 (permalink) |
Base Member
Join Date: Aug 2013
Location: Utah
Posts: 129
Drives: 09 370z touring 6sp
Rep Power: 11 ![]() ![]() ![]() |
![]()
After sitting for a week while I decided whether to relip the wheels or have a professional body shop cut and pull the fenders to fit I finally made up my mind
![]() ![]() I took the car down to a local shop here in utah that does custom body work. I had seen some of their work before and I had known that they were a good quality shop that I can trust. I took the car on my day off to get a bid for the work and tell him what I wanted. Also told him I wanted to run even wider wheels in the future so i was even considering doing a full metal widebody. I had never seen it done and i knew that with the rocket bunny kit coming out that it will be done on a lot of cars and become a pretty standard kit. So I wanted something 100% custom and 1 off. I dropped the car off the next week. After a week went by I went down to check out the progress on the car. The front fenders were cut. ![]() ![]() ![]() ![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vielside Wide Body Kit | HandnPantz | Exterior & Interior | 3 | 03-20-2012 02:24 AM |
Seibon Wide Body | Jamaica | Exterior & Interior | 86 | 11-18-2010 04:48 AM |
VeilSide Wide body. | Jamaica | Exterior & Interior | 24 | 09-15-2010 10:52 PM |