![]() |
Had a lot of fun with some Z owners this past weekend. Unfortunately.....(:facepalm:)... A ladder fell out of the bed of a truck on the highway and I had to be the one to drive over it like a speed bump. I had no time, or room, to swerve out of the lane to avoid it without causing more damage. I pulled over to the side of the road only to see the truck driver pick up his completely demolished ladder and drive away. I was underneath my car at the time to check if I broke the oil pan or if anything was leaking. The car stalled, just cause it was a scary moment for me, so I couldnt just drive off after him... The front of my lip cracked in two spots, the bottom is scraped up and the section of the lip that connects it to the passenger side wheel well is almost cracked off.
I don't have any pics atm cause it is too late for my sick self to get out of bed and take any but I will post up tomorrow morning. So I was thinking if I should just hold on to my lip til it comes apart or start looking into another one but still deciding whether or not to look into a new one or just get the same one.. Also, is it worth selling this one? Maybe someone can just bondo it back up and have it painted? (I can post pics tomorrow to show you guys) |
Oh dude, that sucks...
Depending on how it looks I'd say leave it on there if it doesn't look to bad from the front. As long as its not gonna snap off when you're driving and get stuck under the car, rock it for a bit then replace it later on. Zdayz 2014!! |
Quote:
|
damn bro, sorry to hear about that
|
Quote:
So I was thinking of going for the GT style this time... what do you guys think? http://farm8.staticflickr.com/7321/1...227a1d08_z.jpg IMG_26298 by datsunpride, on Flickr |
I've been trying to decode if I like that one or not for a while now. Still can't. I'll probably go with a TS rep or the varies lip.
Zdayz 2014!! |
Quote:
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 |
Quote:
|
Quote:
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 |
I like that one a lot
|
Did a little bit of stealth-ing today. Need to finish the rear emblem tomorrow. Looked for a third color to match my red and CF scheme and I tried some gold today.. I have been going back and forth with this now but I think it would be a good match up. I would do my lugs, calipers and the silver bits on the side markers to completely get rid of the silver. I know it probably looks silly now with the tow hook but it's just a place-holder.
http://farm6.staticflickr.com/5546/1...06644d78_b.jpg IMG_2746 by datsunpride, on Flickr Gold tow hook (Just for gold reference) http://farm3.staticflickr.com/2886/1...d7182835_b.jpg IMG_2768 by datsunpride, on Flickr http://farm4.staticflickr.com/3777/1...066668eb_b.jpg IMG_2759 by datsunpride, on Flickr Here's a pic of the improved headlights for any of you out there who wanted to see them. http://farm4.staticflickr.com/3789/1...2032e347_b.jpg IMG_2755 by datsunpride, on Flickr |
I like that tow hook man! Its different than the ones you usually see on our cars.
Zdayz 2014!! |
Quote:
|
Lol I don't think I've ever looked for it!
Zdayz 2014!! |
Quote:
|
Nice! I love simple (free) mods, its the little things that really set the car off sometimes.
Zdayz 2014!! |
:iagree: It looks really nice in the sunlight. No one notices the change! but I do so that's what makes it awesome! :tup:
|
I really like the bi-color effect with the rear wing being black-ish, instead of red.
I was thinking of doing the same thing, when I install a rear wing for my Z. How do you like it so far? |
Awesome work brother:tup:
|
Quote:
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 |
Quote:
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 |
I REALLY like that on your red Z! Looks great!
|
So a little bit of an update but I am close to finishing up my phase 1 of my build. All that is left is the shine auto spats, swift springs, stillen gen 3 intakes and cbe exhaust (still a secret ;) ) with art pipes. I am really hoping to get most of this stuff done by April. Phase 2 will be wheels (most likely Avant Garde M350's), possibly full coilover set-up, a new font lip and some performance stuff.
In the meantime I got these barrel overs put on today for the interior. Courtesy of Riptide67 :tup: http://www.the370z.com/members/datsu...28541489-o.jpg Here's just a pic from our South Florida Annual picnic yesterday. Feels good to see more red Z's. http://farm6.staticflickr.com/5521/1...3286dc4f_b.jpg 000000000000000 |
Thanks to the influence of Iwan :rolleyes: I decided to do the lowering first. I will be getting H&R springs with SPC Rear Camber Arms and SPC Toe bolts. All of which will cost me under 500 bucks. That will be my first step now. Will be ordering these soon :)
|
The door barrels look great! I almost wish I had kept them after seeing your install pics!
What made you decide on the H&R springs? I had the Swift springs and the drop was pretty nice and the ride was amazing! Just a little perspective from my end :) |
Quote:
|
Quote:
I thought you were all about those Swiftys.... Shoulda went to the dark side and got TEINS like me.. Im lovin' scraping on everything lol P.S Fly out to AZ and do my headlights/take a vacation with your woman (if you are still dating).. Im getting so close to pulling the lights out and doing them myself..just so scared -_- |
Quote:
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 |
1 Attachment(s)
|
Quote:
|
Had a great trip to Miami today. No stress, went to the beach and saw loads of supercars :D. Had to share some pictures I took while I was at the Lambourghini Dealership. No Z's but this was just pure :yum:
Starting it up with my favorite shot of all time :) http://farm8.staticflickr.com/7436/1...c49c54f7_b.jpg BA458 by datsunpride, on Flickr http://farm3.staticflickr.com/2871/1...d4f22aac_b.jpg Avenge by datsunpride, on Flickr http://farm8.staticflickr.com/7384/1...ee13c983_b.jpg 599 by datsunpride, on Flickr http://farm3.staticflickr.com/2690/1...40d53508_b.jpg by datsunpride, on Flickr Those A$$es! http://farm8.staticflickr.com/7319/1...118322b3_b.jpg Asses by datsunpride, on Flickr http://farm8.staticflickr.com/7366/1...da9c14e1_b.jpg DBS by datsunpride, on Flickr Suprised to see a Morgan here in the States! http://farm3.staticflickr.com/2387/1...5c4e8d85_b.jpg Morgan by datsunpride, on Flickr Ridiculous Panamera Turbo http://farm8.staticflickr.com/7349/1...4f5c4151_b.jpg Pan by datsunpride, on Flickr http://farm3.staticflickr.com/2872/1...88217fc7_b.jpg Panerabread by datsunpride, on Flickr |
nice
|
Love the red stitching you did, looks amazing... it didn't stain the leather when you got some on it? Could be my next mod egg it's warm enough to stand outside for 30 min lol
Sent from the Galaxy, using Tapatalk |
Quote:
|
Finally put down a payment for H&R springs :happydance:
|
mini update
H&R springs will be at my door tomorrow. When Kyle(Houston) gets back to me I will put the payment down for SPC rear camber arms and bolts as soon as I get the invoice. Shooting to have it all done by Monday of next week. A friend and I are going to tackle it together.
|
That was quick.... just got the invoice :tup:
Will be here soon :) |
I think the H&R springs are the perfect drop for the 370z(springs) They're pretty aggressive:tup: gonna look sick!!:yum:
|
Quote:
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 |
All times are GMT -5. The time now is 11:10 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2