Meulen's 40th journal

Luciano13

U know what happens next.... Z1 loses a customer im sure

__________________
http://www.the370z.com/members-370z-...lid-red-z.html

Meulen

so soon into my build too...shame!

Here's the latest. They got back to me and are now saying I routed the lines "too high" on the radiator shroud and that's why my lines aren't fitting right.

Let's think about this!..........
I have one line waaaaay to long. Long enough to loop all the way down to the steering cooler to pull out all the slack. If i mounted them too high, wouldn't that take out slack on the line!!!!!! duh! I just said I had too much slack!

I was looking at there insalation photo and how they showed the lines run in front of the CAI. I could never do that with my lines. The other line is too short to pull that off. Which leads me to believe they sent me the wrong line kit all together.

So after all the that, they said running it the way it is won't hurt anything!!!

__________________
Follow my build thread here: Meulens Build Journal

Luciano13

I see your point. But if Z1 says it will work...then it works....
The main issue would be if it is the wrong kit, that the mm\diameter of the lines is the same size....

__________________
http://www.the370z.com/members-370z-...lid-red-z.html

Meulen

honestly, it's a lot cheaper to make those lines yourself. I paid a premium for a kit that fit and I didn't have to make. I did not receive what I paid for.

__________________
Follow my build thread here: Meulens Build Journal

jlo370z

just because it will work doesn't mean its right. sure you can coil up the extra but then its not neat and tidy, and when your showing cars, you need neat and tidy not it works!

__________________
❝The Jlo370Z Build❞
523HP | 455 ftb tq | 11.5 PSI | 93 Octane
2017 Porsche 991.2 C4!l

Luciano13

I hear ya clear Im on Meulen's side...
I didn't see any pics so i don't know how it looks.
Yes if it looks like @ss and its not the right kit. Z1 shouldn't be making excuses on issuing u the proper kit.......

__________________
http://www.the370z.com/members-370z-...lid-red-z.html

jlo370z

Right on,

I need to order an Oil Cooler was going to order one from them, was hoping for a better outcome here

Muelen get those headlights together, think im going to pull mine out of the car this weekend

__________________
❝The Jlo370Z Build❞
523HP | 455 ftb tq | 11.5 PSI | 93 Octane
2017 Porsche 991.2 C4!l

Mandingo

Here's my similar experience:

I ordered the 34-row kit and received two lines of EXACTLY equal length. They were both the short lines. I took some pictures and sent them to Z1 and they had me send back one of the short lines and they sent me a longer line (only 3.5 inches longer than the short line). I wasn't able to route the line around the CAI due to length so I had to drop it in front of the radiator and around where the PS cooler lines go. It is barely long enough in this config, but it works. I'm not super happy about it either, mainly because I think there should be more slack in the lines to account for engine movement.

__________________
some mods

Meulen

thanks. I decided to leave it for now. I, obviously, was having no luck dealing with Z1. So I'm going to tuck the lines out of sight and eventually, either make my own lines or talk to Tony at Fast Intentions about getting some from him to clean it up.

I'm a little nervous though. I bought a lot of stuff from Z1 and haven't installed it yet. I hope their other products are better! They won't see any of my business again though!!

__________________
Follow my build thread here: Meulens Build Journal