How was the RJM pedal instal? I still have not set time aside to do mine. Really because I have no idea how log it should/will take. It is something I want to be sure I can have done in what ever time I put aside for it.

Any flaws with the instructions? How did you set yours?

The install is pretty easy. Mine took a couple hours max. Hardest part is getting down there and manoeuvring around to remove and install the right pieces. After that it is just some minor adjustment until you get the desired feel.

Basically like N0SL3N said. Plan a couple of hours. I'm glad I did mine while the dash was out. It gave me a little more room to manoeuvre. Having the raised up on jack stands helped too.

Instructions were good, and the parts fit perfectly. I set it up to the 70% mark like the instructions suggest and I was able to row through the gears no problem. The real test will come during the first drive :tup: It's going to be like a whole new car :driving:

Dash and gauges going back in. I'm bummed that I had to stop early tonight.

http://farm9.staticflickr.com/8214/8...947ff57a_z.jpg
IMG_2654 by J M Gale, on Flickr

Care to share how you did that? :D Looks awesome!

Ancient grasshopper secret. :tup:

This is how efficient the BP kit is. The car isn't even started and its already making boost!!! :eek: :roflpuke2:

thats f*cken clean bro... :tup: great job

Have it ready by end of Feb. I'll be in town to pick it up and break it in for you... nice and gentle, I promise!... :eekdance:

:iagree: Great work.

^^^ This :bowrofl:

Thanks

:icon18: pop over for a beer

I could have the car ready to start this weekend. I need to wire up 4 gauges and the boost controller, finish installing the IP and finish running vacuum hose (waiting for the hose to arrive). :tup:

:tiphat:

I just might :tup:

Defi gauges
 

First test with the new Defi gauges,

Those look Fooking bada$$!!

What size gauges are those?

They're beautiful. So you've got boost, oil temperature, and oil pressure in the stock spots; and I'm assuming wideband in your custom pod. Looks like you're set!

:rock:

52mm Defi CR gauges. It looks like any 52mm gauge will slide right in, but it was a bunch of work to get these looking and fitting good in the stock location.

You assume correct. :tup:

This get wired up tomorrow after I buy some wire.

http://farm9.staticflickr.com/8080/8...80613ded_z.jpg
IMG_7738 by J M Gale, on Flickr

I think I will take a vacation, drive my Z up to your garage and install this kit with your help! :)

I just received the worlds most expensive vacuum hose today. Now I can finish my boost controller install. Also need to wire up my A/F ratio gauge. Hopefully I can get to this stuff on the weekend.

Just waiting for the base map now.

:tup: fixed! YW :)

:woot: :iagree: very badazz!!

The A/F ratio gauge got wired up this afternoon. Also received the base map. Now I just need to find some time to finish running vacuum line, load the base map, and hope for warmer weather so I can get this to the exhaust shop. Wouldn't you know, it just started snowing...

Man, you've been busy again. I go away for a week and she's almost all together. Good job man, its looking great... Dam sight wont let me Rep you but +1 for persistence and quality..
:worship:

:iagree: I have been busy to lately, check up now and he's almost done!

Good job Jason looks good :tup:

Thanks Nut_N_Much :tiphat:

Thanks Mike. Now I just need some good weather :driving:

well if it's cold air to build HP you're looking for, come on over! We got plenty! :icon17:

Thanks, but no thanks :tup: I want to move somewhere that has warmer winters, not colder. Less snow (none) would be better too. :rofl2:

This thread is really boosted by the GaleForce... :rock::rock::rock:

Come to Florida! Ha, only if you can deal with the heat though :stirthepot:

Hahaha come to Guam over 80 degrees all year

I did consider buying property in Florida. :tup:


I haven't been to Guam, but with 80 degrees all year, I think I would like it. :happydance:


A quick shot while I was walking by today. I'm thinking about painting or powder coating the strut bar...

http://farm9.staticflickr.com/8354/8...e39fa9e5_z.jpg
IMG_2669 by J M Gale, on Flickr

Whats the hp at rear whit this turbo kit??

500+ rwhp

:yum:

:iagree: I want to move somewhere warmer to! I was looking into both Florida and Texas!

Only problem is getting a visa/green card to work and live, otherwise I would have probably already done it :ugh2: But Jason, you and I could start an electrical business together if we could get approved:tup:

Lets do it! I'm a little freaked out about Texas though. I hear they have huge roaches. :ugh2:

Look up palmetto bugs...LOL! Florida Natives :icon18:

What is that little red filter near the right intake? And why did you choose to go with dual BOVs instead of the single?

Looks awesome!!!

Thats the crankcase vent, there is one on the other side as well its just pointing towards the camera. I was actually going to ask if you Jason if you tried to modify the passengers side to stand up just like it does on the drivers side. Maybe one could get a drivers side line and make it work? I spent a bit of time looking at this while I was doing my injectors. Or maybe change out the drivers side so that it lays down like the passengers?