Are you planning on swapping out the gears? My guess would be that all the top-end work you're doing will shift the powerband to the right more than a little. 4.08 gears would get you into the meat of the powerband faster.

As of right now I am not planning on swapping out the gears. I might later when i get back to the states. Here is a pic of my new motor mounts from Z1 Motorsports.:happydance: These should help with the flexing of the motor they are really stout and well made.:tup:

I have just received the full cylinder head gasket kit from nissan today and a new thermostat. I am hoping the heads will be done done next week from GTM. Here is a pic of what the Z's and G's rep here on Guam. They are located on the back windshield. Not a huge sticker fan but its going to look good and with not many Z's and G's here we will standout. :happydance: It sure is depressing when your car is down for so long and the heads are halfway around the world. Hope GTM can show what these JUN cams and upgraded valve train will do when the heads are flowing so much better.

that sticker looks familiar... where can i get one ;)

Finally have an update to my build. Gtm has been backed logged so its taking a little longer to get the heads put back together. Today I shipped off my torque converter to gtm cause I am purchasing their upgraded torque converter for the 370z. Gtm has told me they hope to get the heads back together and shipped by this week. I am keeping my fingers crossed they can get it done. Thanks to gtm for stepping up and handling this built for me.

Haha, your car might be the reason my car won't start making headway until January (late). GTM has my ride for the next nine months. Cant wait to see this come together. They do have a lot of projects on their plate.

They don't have my car they just have my heads and JUN cams. They had to make the valves. I am stationed in Guam so half a world away. I am hope they will be done with mine next week. Good luck on your ride u will have a sweet setup when done

Here an update. I have just purchased the GTM 7 AT torque converter along with the HD flex plate. I really am hoping that GTM will finish my heads this week and get them shipped to me. I also have ordered new urethane exhaust mount kit which will keep the exhaust from shifting when under acceleration from torque solutions.

Omg guys sorry for the very slow build updates. I have just completed the order for the mounts I have the engine mounts already and just bought the z1 motorsports urethane transmission mount. I just received word from GTM the heads are finally done, completed, finished. Lol the flex plate is being treated now and they want to ship everything out on Monday back to me here in Guam. So here's a list of the coming parts:

1. Heads w/ jun ex cams
Upgraded valve springs
Upgraded retainers
Upgraded valves
Five angle valve job
2. GTM upgraded 7AT torque converter
3. GTM upgraded HD flex plate
4. Cosworth head gaskets
5. Arp L19 head bolts

Included parts waiting here in Guam to be installed:
1. Stillen transmission cooler
2. Hks spark plugs
3. Nst pulley set
4. Z1 motorsports urethane engine mounts and transmission mount (in transit)
5. Sprint booster

Current mods:
1. Ark CBE
2. Berk hfc's
3. Stillen gen 3 intakes
4. Motordyne m370 intake manifold
5. Stillen headers
6. Stillen grounding kit
7. BC coil over kit
8. Uprev tune

Hey guys, so I finally go the word today that all my parts are on there way back to Guam and I even have the tracking numbers so i know that they are on there way back to me. They should be here in Guam on Tuesday so I will be posting pics of the heads and all the other parts that are being recieved.

yessss another brother with jdm tail lights!!!

Maybe I didn't read thoroughly, but, why is the front of your car missing? And what kind of SHADY ÁSS dealer do you have in Guam that THEY installed your Jun camshaft???

LOL

You should read the whole thread, they removed my motor and I pulled the heads off and sent to Ca. for upgraded valvetrain and Jun cam install. GTM actually was the placed that has installed my cams and valvetrain. The dealership is only responsible for pulling the motor out and heads off and they are going to reinstall the heads and all the other parts I am going install.

bingo!

Here are pics of my assembled head with the upgraded valve train, 5 angle valve job and JUN cams installed. GTM sent them to me this morning. They are on the way back to me right now. I cant wait till these get installed next week is when the installation starts. It looks like they will be back in Guam on Tuesday.:happydance: