Baer383(Sneaky Man)Journal

Baer383 · 05-05-2012, 12:16 PM

Well I went to Z1 Motorsports here in Ga and had them re tune my car from scratch it took John 4hrs. total to finish it up but before he started I had a 10lb pulley and it only made 445rwhp then I took it off and put on a 11 lb pulley on made 449 first pull(this was a few weeks ago)John at that time only got it to 451rwhp so he told me to come back when he has more time to spend with it well 4hrs seem to be enough time b/c here is what he got.

svmtbman · 05-05-2012, 04:11 PM

Nice!

Baer383 · 05-13-2012, 09:23 AM

I just picked up a Snow Performance water/meth injection kit,this kit is very easy to install but trying to figure out where everything is going is quite a challenge,I'm about finished with it will post pics later as I get closer to being finished.

SPOHN · 05-13-2012, 09:25 AM

Baer383 · 05-13-2012, 09:40 AM

Quote:

Originally Posted by SPOHN

Pics later

I have to go buy a tap for the intake tubes

Zat_Zuma · 05-13-2012, 12:23 PM

What methonal injector sizes have you selected?

SPOHN · 05-13-2012, 12:31 PM

Quote:

Originally Posted by Zat_Zuma

What methonal injector sizes have you selected?

Whatever fits in his butt. Them hemorrhoids can get hot.

Baer383 · 05-13-2012, 12:35 PM

Quote:

Originally Posted by Zat_Zuma

What methonal injector sizes have you selected?

175ml @60psi pump pressure but the tech at snow said my kit comes with a 220psi pump so these should flow about 200-225ml he said that's a good place to start from.

1 in each intake pipe 1-1.5 in after MAF

SPOHN · 05-13-2012, 12:46 PM

I wonder what they would say about meth kit on a NA car. I don't see how it would hurt

SPOHN · 05-13-2012, 12:57 PM

Did a quick search. Many variables when NA come onto play. Better for high compression motors where timing comes into play.

Zat_Zuma · 05-13-2012, 06:08 PM

I have a Aquamist system and will be installing a 0.4 pre-MAF and 0.7 after MAF in the intake pipes. Somewhat like GTM's system or at least having the same intent as GTM's. I won't be injecting methanol into the air cooler.

It will be interesting to see how our stage 1.5's compare after I'm done.

Baer383 · 05-14-2012, 08:48 PM

Here are some pics of whats going on with the install.

Glokwork · 05-14-2012, 09:40 PM

Love the PW you have done an awesome job with your Z buddy. Great numbers too btw

are you running test pipes?

Baer383 · 05-14-2012, 09:43 PM

Quote:

Originally Posted by Glokwork

Love the PW you have done an awesome job with your Z buddy. Great numbers too btw

are you running test pipes?

Thanks

no I have Stock cats.

SPOHN · 05-15-2012, 05:28 AM

Can't wait for you to test that baby out.

05-05-2012, 12:16 PM	#121 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	Well I went to Z1 Motorsports here in Ga and had them re tune my car from scratch it took John 4hrs. total to finish it up but before he started I had a 10lb pulley and it only made 445rwhp then I took it off and put on a 11 lb pulley on made 449 first pull(this was a few weeks ago)John at that time only got it to 451rwhp so he told me to come back when he has more time to spend with it well 4hrs seem to be enough time b/c here is what he got. __________________ 2013 ZL1 754 rwhp 747 rwtq

05-05-2012, 04:11 PM	#122 (permalink)
svmtbman Base Member Join Date: Mar 2011 Location: Macon, GA Age: 52 Posts: 219 Drives: 2011 370Z PW M6 Rep Power: 14	Nice! __________________ 2011 Pearl White, Persimmon, Touring, Sport, Navigation, 6sp - PW JDM shift knob, Invidia Gemini CBE, aFe dry filters, HPS intake tubes, JDM fog light, Redline shift boot, LED interior lights, Z1 hood struts, and 30% tint.

05-13-2012, 09:23 AM	#123 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	I just picked up a Snow Performance water/meth injection kit,this kit is very easy to install but trying to figure out where everything is going is quite a challenge,I'm about finished with it will post pics later as I get closer to being finished. __________________ 2013 ZL1 754 rwhp 747 rwtq

05-13-2012, 09:25 AM	#124 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	__________________

05-13-2012, 12:23 PM	#126 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 18	What methonal injector sizes have you selected? __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

05-13-2012, 12:46 PM	#129 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I wonder what they would say about meth kit on a NA car. I don't see how it would hurt __________________

05-13-2012, 12:57 PM	#130 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Did a quick search. Many variables when NA come onto play. Better for high compression motors where timing comes into play. __________________

05-13-2012, 06:08 PM	#131 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 18	I have a Aquamist system and will be installing a 0.4 pre-MAF and 0.7 after MAF in the intake pipes. Somewhat like GTM's system or at least having the same intent as GTM's. I won't be injecting methanol into the air cooler. It will be interesting to see how our stage 1.5's compare after I'm done. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

05-14-2012, 08:48 PM	#132 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	Here are some pics of whats going on with the install. __________________ 2013 ZL1 754 rwhp 747 rwtq

05-14-2012, 09:40 PM	#133 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 21	Love the PW you have done an awesome job with your Z buddy. Great numbers too btw are you running test pipes? __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

05-15-2012, 05:28 AM	#135 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Can't wait for you to test that baby out. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ClemsonWill's Journal	ClemsonWill	Member's 370Z Gallery	507	07-07-2017 09:24 AM
My Photo Journal	bullet1	Member's 370Z Gallery	8	06-27-2015 07:07 PM
AbgYaks' Journal..	abgyak	Member's 370Z Gallery	69	01-23-2012 07:21 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM
G37HKS's Journal..	G37sHKS	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	07-09-2010 07:58 AM