TravisJB Journal

LiquidZ · 11-19-2009, 06:59 AM

Quote:

Originally Posted by Robispec

Yes 2nd by a 10th! Paul worked hard for his win .....though lol
Rotrex Race only kit as we will be using the space where the A/C compressor lives...

Did I just read about a potential S/C build?

Bluemeanie · 11-19-2009, 09:30 AM

Quote:

Originally Posted by travisjb

Nice to hear from you! Priority right now is just to get the thing running... But yeah, we should talk at some point and I will PM you after I get through my tgiving event.

Already have a custom-made cross-member that my cage fab guy built.

We are working on a custom front splitter as well... would LOVE to see pictures of how you set yours up!!! Feel free to post here.

Congrats on your successes so far! Sounds like you came in just behind Paul at AE??? How do you like the square tire setup ? I thought about doing that but ruled it out b/c I feared it would throw the balance off and create too much oversteer.

Also, can you share which supercharger you are pursuing ?

Rgds

Thanks Travis!

I see Robi has already responded and he's much more capable than I to share what we're doing. It's always refreshing to compare info between fellow racers with a common goal in mind.....to be very fast AND safe!

Thanks for the invite as well Travis and best of luck with your build

Z06Stan

Robispec · 11-19-2009, 05:49 PM

Quote:

Originally Posted by LiquidZ

Did I just read about a potential S/C build?

Yes you did...it will be a race part only with zero concessions for street...like the first thing you need to do is remove your A/C unit! lol But it piping and FMIC will be second to none as to effecency and charge density.

Fathead · 11-20-2009, 08:37 PM

Quote:

Originally Posted by Robispec

Yes you did...it will e a race part only with zero consessions for street...like the first thing you need to do is remove your A/C unit! lol But it piping and FMIC will be second to none as to effecency and charge density.

I love race only parts, it helps you weed out all the *******.

travisjb · 11-23-2009, 07:09 PM

All, with somewhat scaled back ambitions / expectations, I will be running in my local NASA TT event this weekend... stock steering, no rear diff cooling, etc... but the car should be a go!

Thanks to Junior at Fathead Fab for stepping up to help me get ready! So far, he's already managed to get the computer situation figured out (there was a disconnected throttle position sensor)... now need to do some final tweaks on seat, replace oem steering assembly, mount new side mirrors and add back in requisite safety equip

Will have an updated weight to report next weekend!

Robi and Stan... the front splitter looks perfect ! if you have the time and inclination would love to see more pics of how you constructed and attached the 'sub frame' and what materials you used etc. Okay to post here or start a new thread. Also, I'm definitely in for updates on the SC!

Bluemeanie · 11-23-2009, 07:37 PM

Quote:

Originally Posted by travisjb

All, with somewhat scaled back ambitions / expectations, I will be running in my local NASA TT event this weekend... stock steering, no rear diff cooling, etc... but the car should be a go!

Thanks to Junior at Fathead Fab for stepping up to help me get ready! So far, he's already managed to get the computer situation figured out (there was a disconnected throttle position sensor)... now need to do some final tweaks on seat, replace oem steering assembly, mount new side mirrors and add back in requisite safety equip

Will have an updated weight to report next weekend!

Robi and Stan... the front splitter looks perfect ! if you have the time and inclination would love to see more pics of how you constructed and attached the 'sub frame' and what materials you used etc. Okay to post here or start a new thread. Also, I'm definitely in for updates on the SC!

You got it and thanks!

Great news on your end by the way and best of luck at the races Travis

Keep us posted on your race results.

Which mirrors did you go with? That's on our list as well. We should have the OS Geiken (sp?) diff in this week with the cooler. Right Robi

Z06stan

Mike · 11-23-2009, 10:12 PM

Robi folks, I too would be interested in purchasing a splitter

travisjb · 11-24-2009, 10:27 AM

hey stan, the mirrors are generic AP Racing side mirrors... we will affix them to custom polycarb window fairings that occupy the front 1/4 - 1/3 of the side windows... not sure exactly how it will turn out - junior's working on it this week

Ken in AZ · 11-24-2009, 11:06 AM

Good work fellows! Travis, good to hear you'll get to run it this weekend an feel out the new mods.

Sooner or later you're gonna need a truck and a trailer to get that thing around - lol

travisjb · 11-24-2009, 09:53 PM

Quote:

Originally Posted by Ken in AZ

Good work fellows! Travis, good to hear you'll get to run it this weekend an feel out the new mods.

Sooner or later you're gonna need a truck and a trailer to get that thing around - lol

well, we're actually touch and go again for the weekened... fingers crossed

yes, you're right about the trailer... trying to postpone that as long as possible, but eventually I won't have a choice... hard to keep a car like this street'able

imag · 11-25-2009, 12:17 AM

Hope you at least get to try it out this weekend. It will be good to see how it's coming together...

travisjb · 11-28-2009, 02:22 PM

up till 2am last night, got everything working except when i got to the track this morning, couldn't get the brakes and turn signals to work ! so now i'm home... going to nap a couple hours then try and figure out what's wrong... it's not the lights themselves (tested)... not the brake position sensor (tested... and turn signal doesn't work either, nor hazards)... not a blown fuse (looked)... i am getting voltage coming off the brake position indicator (on when brake NOT applied), but haven't traced it to see where it goes and why things don't work after that... any ideas would be greatly appreciated, ie if someone has studied the wiring diagram... will check in after nap

travisjb · 11-29-2009, 09:28 PM

so... I did something stupid... Decided to get aggressive and de-pin the main harness behind the panel... I forgot to mark on of the branches going to the primary gauge cluster and ended up de-pining that one !!!! ... It's fubar and I'm going to have to order an entire new harness... I'm certain it's going to cost a crap-load... if anyone knows a dealer that can hook me up, please drop me a PM.............. UPDATE: I'm looking for the 'Main Harness' which is Nissan Part # 24010-Z34006

FYI, car with driver and full tank of gas weighed in at 3260 yesterday... that'd be sub-3,000 without driver and fuel, and after roll cage and all accessories installed... and it is BEFORE removing A/C equip... I'm expecting that to be another 40 or so pounds... we'll crown the victor of the weight guessing contest after a/c is removed and car is back in working order

MightyBobo · 11-30-2009, 12:31 AM

Oh snap...I wasn't too far off then lol

travisjb · 11-30-2009, 12:40 AM

Quote:

Originally Posted by MightyBobo

Oh snap...I wasn't too far off then lol

you were close!

not declaring a victor until we get the a/c out and I weight it with 3/4 tank of fuel, but looking like DannyGT right now... won't have the answer for a couple weeks, unfortunately because I'm now waiting on a wiring harness before we do anything else !

11-23-2009, 07:09 PM	#545 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	All, with somewhat scaled back ambitions / expectations, I will be running in my local NASA TT event this weekend... stock steering, no rear diff cooling, etc... but the car should be a go! Thanks to Junior at Fathead Fab for stepping up to help me get ready! So far, he's already managed to get the computer situation figured out (there was a disconnected throttle position sensor)... now need to do some final tweaks on seat, replace oem steering assembly, mount new side mirrors and add back in requisite safety equip Will have an updated weight to report next weekend! Robi and Stan... the front splitter looks perfect ! if you have the time and inclination would love to see more pics of how you constructed and attached the 'sub frame' and what materials you used etc. Okay to post here or start a new thread. Also, I'm definitely in for updates on the SC! __________________ 2009 370Z #104 For Sale

11-23-2009, 10:12 PM	#547 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	Robi folks, I too would be interested in purchasing a splitter __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-24-2009, 10:27 AM	#548 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	hey stan, the mirrors are generic AP Racing side mirrors... we will affix them to custom polycarb window fairings that occupy the front 1/4 - 1/3 of the side windows... not sure exactly how it will turn out - junior's working on it this week __________________ 2009 370Z #104 For Sale

11-25-2009, 12:17 AM	#551 (permalink)
imag Enthusiast Member Join Date: Mar 2009 Location: Oakland, CA Posts: 446 Drives: up the wall Rep Power: 16	Hope you at least get to try it out this weekend. It will be good to see how it's coming together... __________________ Stillen CBE, Stillen track cooler, Stillen Gen3 Intakes, B&M short shift kit

11-28-2009, 02:22 PM	#552 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	up till 2am last night, got everything working except when i got to the track this morning, couldn't get the brakes and turn signals to work ! so now i'm home... going to nap a couple hours then try and figure out what's wrong... it's not the lights themselves (tested)... not the brake position sensor (tested... and turn signal doesn't work either, nor hazards)... not a blown fuse (looked)... i am getting voltage coming off the brake position indicator (on when brake NOT applied), but haven't traced it to see where it goes and why things don't work after that... any ideas would be greatly appreciated, ie if someone has studied the wiring diagram... will check in after nap __________________ 2009 370Z #104 For Sale

11-24-2009, 11:06 AM	#549 (permalink)
Ken in AZ Base Member Join Date: Jun 2009 Location: Maricopa AZ Posts: 35 Drives: M45 2006 Rep Power: 262	Good work fellows! Travis, good to hear you'll get to run it this weekend an feel out the new mods. Sooner or later you're gonna need a truck and a trailer to get that thing around - lol

11-29-2009, 09:28 PM	#553 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	so... I did something stupid... Decided to get aggressive and de-pin the main harness behind the panel... I forgot to mark on of the branches going to the primary gauge cluster and ended up de-pining that one !!!! ... It's fubar and I'm going to have to order an entire new harness... I'm certain it's going to cost a crap-load... if anyone knows a dealer that can hook me up, please drop me a PM.............. UPDATE: I'm looking for the 'Main Harness' which is Nissan Part # 24010-Z34006 FYI, car with driver and full tank of gas weighed in at 3260 yesterday... that'd be sub-3,000 without driver and fuel, and after roll cage and all accessories installed... and it is BEFORE removing A/C equip... I'm expecting that to be another 40 or so pounds... we'll crown the victor of the weight guessing contest after a/c is removed and car is back in working order __________________ 2009 370Z #104 For Sale Last edited by travisjb; 11-30-2009 at 12:09 AM.

11-30-2009, 12:31 AM	#554 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	Oh snap...I wasn't too far off then lol __________________ I don't own a car anymore.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 10:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 05:44 PM