DDM Project 370Z

M.Bonanni · 03-24-2009, 06:43 PM

Good news! I was able to corner balance the car within a good enough range that I didn't have to add any more weight back to the rear!

Car is now corner balanced to a 50.4% cross weight, 55%/45% front to rear bias, and 51%/49% left to right bias. All with the driver (me) in the car. If I find myself bored enough within the next few days, I may tweak with it a little more to try and get that perfect 50% cross weight.

Total vehicle weight with 1/2 tank of gas, no driver came in at 3230 lbs.

Tomorrow I will set my alignment and cold tire pressure then take a trip to my vinyl guy to get the sponsor logos put on the car.

03-24-2009, 06:43 PM	#1 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1322	Good news! I was able to corner balance the car within a good enough range that I didn't have to add any more weight back to the rear! Car is now corner balanced to a 50.4% cross weight, 55%/45% front to rear bias, and 51%/49% left to right bias. All with the driver (me) in the car. If I find myself bored enough within the next few days, I may tweak with it a little more to try and get that perfect 50% cross weight. Total vehicle weight with 1/2 tank of gas, no driver came in at 3230 lbs. Tomorrow I will set my alignment and cold tire pressure then take a trip to my vinyl guy to get the sponsor logos put on the car. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode