DDM Project 370Z

M.Bonanni · 12-15-2009, 06:18 PM

^^Thanks

. Now I just need a roll bar or harness bar and some harnesses so I can use them for something other than car shows

.

On another note. I finally got around to installing the SPL Parts Pro Rear Traction Arms. Man what an easy install.

Raised the car another 1/2" all around to see how it effects handling. I think I was too low in the past to utilize the "sweet spot" for the suspension geometry. I also switched back to the stock sway bars for now. New vinyl layout coming on Thursday along with Version #2 of the Kognition Design wing then its off to Streets of Willow Springs for the Redline Time Attack Customer Appreciation Day on Friday. I just hope my tires have enough life in them to drive out there from Vegas, do the track day, and drive back.

12-15-2009, 06:18 PM	#1 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1322	^^Thanks . Now I just need a roll bar or harness bar and some harnesses so I can use them for something other than car shows . On another note. I finally got around to installing the SPL Parts Pro Rear Traction Arms. Man what an easy install. Raised the car another 1/2" all around to see how it effects handling. I think I was too low in the past to utilize the "sweet spot" for the suspension geometry. I also switched back to the stock sway bars for now. New vinyl layout coming on Thursday along with Version #2 of the Kognition Design wing then its off to Streets of Willow Springs for the Redline Time Attack Customer Appreciation Day on Friday. I just hope my tires have enough life in them to drive out there from Vegas, do the track day, and drive back. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode