CarbonZ 1000+rwhp Engine Build

WhatnowGamer · 06-25-2016, 09:00 PM

Anything yet?

EndlessZ · 06-27-2016, 01:25 AM

Subbing!

Nismodean · 07-05-2016, 12:33 PM

Silence since March 1, 2016. This does not bode well grasshoppers!

njobe89 · 07-05-2016, 12:47 PM

hopefully it'll be ready for the 1/2 mile shootout in september 0.o

Carbon_z · 07-26-2016, 12:28 PM

Hey guys, sorry for the lack of updates. I've been busy setting up my new company Carbon Signature and the Z had a delay due to a wiring issue (I know a wire right!!) lol...

But here is a teaser

This is only the THIRD start up and hasn't exceeded 3k rpm yet due to break-in procedure but I wanted to share

. We will have it dyno'ed HOPEFULLY THIS WEEK!

Thanks again to Sharif at Forged Performance and Tony at Fast Intentions. They have invested so much time and research into this build that I couldn't have ask for a better pair of minds.

vvvvvvvvvvvv HERE IS THE VIDEO OF IT FIRING UP

vvvvvvvvvvv
https://youtu.be/bR1N9yEYPaQ

ScottM · 07-26-2016, 08:54 PM

Best of luck Carbon_z. When looking at your car and build, "WOW" keeps coming out of my mouth. You definitely took the 370z to a level unheard of.

Spooler · 07-27-2016, 12:01 PM

Carbon_z · 07-27-2016, 12:28 PM

Quote:

Originally Posted by ScottM

Best of luck Carbon_z. When looking at your car and build, "WOW" keeps coming out of my mouth. You definitely took the 370z to a level unheard of.

Thank you for the kind words. Really Appreciate it

Carbon_z · 07-27-2016, 03:11 PM

It's about to go down at Forged. Going to do some test and comparisons with different setups

Spooler · 08-03-2016, 06:49 PM

How is she doing?

bullitt5897 · 08-04-2016, 11:13 AM

Quote:

Originally Posted by Spooler

How is she doing?

His testing is going to take a few weeks... They are going to run the stock intake manifold up to about 25psi (which is probably the limit of safety with the stock plastic unit) I have seen them crack as low as 26psi and mine failed at 28psi... Once that is complete they are going to throw on the RJM GTR conversion and go for broke!

They are also testing the limits of the stage 3 kit.... which will take some time as we dont know its true limits yet or where it will run into roadblocks.

Much prop for Tony (FI), Moses and Sharif (FP) to take on this challenge. All I know is that others will truly benefit from this testing. This may lead to new products for those looking to make monster power.

Carbon_z · 08-06-2016, 02:04 PM

Thanks for answering the questions Mike. Yep will be good knowledge for the vq3.7 community to know once and for all the stock plastic manifold limits and GT-R conversion comparison. All the knowledge gained from this comparison will be passed over to the 3.7 370z and G37 community (courtesy of Forged Performances and Fast Intentions). Knowledge is POWER (no dyno sheet needed) lol

let's just say whatever we figure out, Mike aka Bullitt5897 is going to be the test subject on how well our blocks hold up haha

Carbon_z · 08-31-2016, 11:47 AM

When your Nissan 370z (400zTT) is about that GT-R life

We will have a full report however we have already completed the OEM plenum testing with fuel and e85.. we are now doing the GTR setup so we can provide a full comparison for the 370z/g37 community, brought to you by Sharif Abdelbaset over at Forged Performance.

carlitos_370z · 08-31-2016, 12:11 PM

Spooler · 08-31-2016, 12:53 PM

It will be interesting to see what happens.

06-25-2016, 09:00 PM	#166 (permalink)
WhatnowGamer Base Member Join Date: Jul 2015 Location: Orlando, FL Posts: 30 Drives: 15' Nismo MT Rep Power: 9	Anything yet? Carbon_z likes this.

06-27-2016, 01:25 AM	#167 (permalink)
EndlessZ Base Member Join Date: Oct 2015 Location: minnesota Posts: 42 Drives: 09 NISMO PW Rep Power: 9	Subbing! Carbon_z likes this.

07-05-2016, 12:33 PM	#168 (permalink)
Nismodean Enthusiast Member Join Date: Oct 2010 Location: Washington Posts: 313 Drives: 2009 RIP Now 2012 Rep Power: 14	Silence since March 1, 2016. This does not bode well grasshoppers! Carbon_z likes this. __________________ The Truth, it hurts sometimes. FI LTH & FI CF CBE. This is a 370Z forum, if I want to fling poo at another brand of car and your feelings get hurt, then you're hanging out in the wrong forum (cry elsewhere).

07-05-2016, 12:47 PM	#169 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174283	hopefully it'll be ready for the 1/2 mile shootout in september 0.o Carbon_z and carlitos_370z like this. __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

07-26-2016, 12:28 PM	#170 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,695 Drives: Carbon Fiber 370z Rep Power: 18	Hey guys, sorry for the lack of updates. I've been busy setting up my new company Carbon Signature and the Z had a delay due to a wiring issue (I know a wire right!!) lol... But here is a teaser This is only the THIRD start up and hasn't exceeded 3k rpm yet due to break-in procedure but I wanted to share . We will have it dyno'ed HOPEFULLY THIS WEEK! Thanks again to Sharif at Forged Performance and Tony at Fast Intentions. They have invested so much time and research into this build that I couldn't have ask for a better pair of minds. vvvvvvvvvvvv HERE IS THE VIDEO OF IT FIRING UP vvvvvvvvvvv https://youtu.be/bR1N9yEYPaQ gbrettin, Masterbeatty, Hotrodz and 1 others like this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz. Last edited by Carbon_z; 07-26-2016 at 01:41 PM.

07-26-2016, 08:54 PM	#171 (permalink)
ScottM Base Member Join Date: Jul 2016 Location: Iroquois Ontario Posts: 244 Drives: 2017 370z Coupe Rep Power: 42161	Best of luck Carbon_z. When looking at your car and build, "WOW" keeps coming out of my mouth. You definitely took the 370z to a level unheard of. Carbon_z likes this.

07-27-2016, 12:01 PM	#172 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	Carbon_z likes this.

07-27-2016, 03:11 PM	#174 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,695 Drives: Carbon Fiber 370z Rep Power: 18	It's about to go down at Forged. Going to do some test and comparisons with different setups gbrettin, CarbonSignal, Masterbeatty and 5 others like this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz. Last edited by Carbon_z; 07-27-2016 at 03:45 PM.

08-03-2016, 06:49 PM	#175 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	How is she doing? Carbon_z likes this.

08-06-2016, 02:04 PM	#177 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,695 Drives: Carbon Fiber 370z Rep Power: 18	Thanks for answering the questions Mike. Yep will be good knowledge for the vq3.7 community to know once and for all the stock plastic manifold limits and GT-R conversion comparison. All the knowledge gained from this comparison will be passed over to the 3.7 370z and G37 community (courtesy of Forged Performances and Fast Intentions). Knowledge is POWER (no dyno sheet needed) lol let's just say whatever we figure out, Mike aka Bullitt5897 is going to be the test subject on how well our blocks hold up haha bullitt5897, Hotrodz and whiteZ34 like this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz. Last edited by Carbon_z; 08-06-2016 at 02:45 PM.

08-31-2016, 11:47 AM	#178 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,695 Drives: Carbon Fiber 370z Rep Power: 18	When your Nissan 370z (400zTT) is about that GT-R life We will have a full report however we have already completed the OEM plenum testing with fuel and e85.. we are now doing the GTR setup so we can provide a full comparison for the 370z/g37 community, brought to you by Sharif Abdelbaset over at Forged Performance. bullitt5897, gbrettin, Hotrodz and 2 others like this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz. Last edited by Carbon_z; 08-31-2016 at 12:24 PM.

08-31-2016, 12:11 PM	#179 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	Carbon_z likes this.

08-31-2016, 12:53 PM	#180 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	It will be interesting to see what happens. Carbon_z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Build	esfourteen	Forced Induction	190	07-26-2014 09:55 PM
VSR Engine Build	SRperformance	Forced Induction	90	05-24-2014 01:31 PM
Engine Build Thread	DIGItonium	Forced Induction	113	04-07-2013 01:17 PM
engine build time	Nissan370	Forced Induction	42	08-05-2012 09:48 AM
1000 RWHP & 879 RWTQ 370Z forum car	budakai	The Lounge (Off Topic)	120	02-21-2010 02:12 PM