what tire spec are they squared? nice car putting in work.

xxAGAVExx Journal
 

Not squared, 285/35 Front and 305/30 rear. When I install my Akebono brakes in a few weeks, I'm gonna throw the rears on the front to see how they fit though :)


Sent from my iPhone using Tapatalk

sheesh.`

Got my calipers back from paint.
https://uploads.tapatalk-cdn.com/201...5afca9071d.jpg


Sent from my iPhone using Tapatalk

I'm at 5 front & 4 back as the roads here in Los Angeles are terrible. I may stiffen them up once I finish installing a few suspension components and get it aligned.

Added some carbon fiber pieces, my ebrake was getting worn so I added the nardi handle, and also added the evo-r barrel covers on the doors.
https://uploads.tapatalk-cdn.com/201...8b6bd160c3.jpg
https://uploads.tapatalk-cdn.com/201...e332dca2be.jpg
https://uploads.tapatalk-cdn.com/201...d94d736186.jpg


Sent from my iPhone using Tapatalk

xxAGAVExx Journal
 

Finally got around to installing my new calipers. Had a stubborn caliper bolt, ended up having to cut it off since I stripped it trying to get it off. No one had a replacement in stock so ordered some new ones. Rear calipers are on just need to attach the last bolt. Fronts will have to wait until next weekend.
https://uploads.tapatalk-cdn.com/201...f9cb455aac.jpg
https://uploads.tapatalk-cdn.com/201...471086e315.jpg



Sent from my iPhone using Tapatalk

xxAGAVExx Journal
 

Got the fronts installed today, a lot easier, took like 2 1/2 hours

https://uploads.tapatalk-cdn.com/201...ebc4d46da6.jpg
https://uploads.tapatalk-cdn.com/201...b7c7b78c4b.jpg
https://uploads.tapatalk-cdn.com/201...45b48275db.jpg
https://uploads.tapatalk-cdn.com/201...91fc3b84ca.jpg

Sent from my iPhone using Tapatalk

I'm really digging that blue!

Thanks, car is blacked out with blue accents under the hood, figured I needed a little blue on the outside too


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/201...186b201e77.jpg


Sent from my iPhone using Tapatalk

A few goodies to put on before ZDayz
https://uploads.tapatalk-cdn.com/201...25e52be10b.jpg
https://uploads.tapatalk-cdn.com/201...68a9eeadb7.jpg


Sent from my iPhone using Tapatalk

Also put together my quickjack, gonna make changing my brake pads easier/faster :)
https://uploads.tapatalk-cdn.com/201...7b76db3798.jpg


Sent from my iPhone using Tapatalk

Sweet! Looks like I'll be wrenching on my car at your place from now on ;)

xxAGAVExx Journal
 

Anytime, just bring the beer.


Sent from my iPhone using Tapatalk

A few pics from ZDayZ
https://uploads.tapatalk-cdn.com/201...fdd9494a40.jpg
https://uploads.tapatalk-cdn.com/201...1e47105182.jpg
https://uploads.tapatalk-cdn.com/201...7d3957c907.jpg
https://uploads.tapatalk-cdn.com/201...f1c75f69a1.jpg


Sent from my iPhone using Tapatalk

After renting a truck to haul the Z up to North Carolina for ZDayz I decided to trade in the Sentra and by one. Here's my new daily
https://uploads.tapatalk-cdn.com/201...1ce3c17f5d.jpg


Sent from my iPhone using Tapatalk

Loving the purchases!

Well it’s been a long time since I’ve posted.....life.....but I’m still around. Recently moved to Bradenton so I’m closer to the Desoto Speedway and Sebring, going to try to get out to both in the next few months I hope. Ordered a carbon fiber steering wheel on Black Friday and installed today :)

https://uploads.tapatalk-cdn.com/201...148492beac.jpg

https://uploads.tapatalk-cdn.com/201...3aca5f767d.jpg



Sent from my iPhone using Tapatalk

That looks great.

Stopped by Import Face Off at Desoto Speedway today. I parked next to iron man :)
https://uploads.tapatalk-cdn.com/201...9d483abf5d.jpg
https://uploads.tapatalk-cdn.com/201...bb4c0c00b8.jpghttps://uploads.tapatalk-cdn.com/201...8d30207291.jpghttps://uploads.tapatalk-cdn.com/201...19a04e3ffc.jpghttps://uploads.tapatalk-cdn.com/201...705645ebcb.jpg


Sent from my iPhone using Tapatalk

love those sparco pedals, are they model specific or universal?

They actually ended up not fitting, supposed to be universal.


Sent from my iPhone using Tapatalk

Time to dust off this thread, still have the Z but haven’t been too active, had some kids and went back to school. But as a graduation gift to myself I’m going boosted!!!!! Just ordered a southbend stage 3 clutch and lightweight flywheel, CJM fuel return kit and the best part...... BPs new twin kit!!!!


Sent from my iPhone using Tapatalk

Congrats on it all!

Nice! Looking forward to the updates.

Glad you are still alive and thriving. It is never to late for adding boost!

Sent from my SM-G965U using Tapatalk

Southbend stage 3 clutch, CSC delete, lightweight flywheel and new engine/transmission mounts installed. Love the new flywheel, good mod by itself. Next will be the fuel return system once everything comes in.


Sent from my iPhone using Tapatalk

CJM fuel return system and other fuel upgrades just got in, hopefully I can start working on it soon.https://uploads.tapatalk-cdn.com/202...1e2275e8a6.jpg
https://uploads.tapatalk-cdn.com/202...a870fe2fa6.jpg


Sent from my iPhone using Tapatalk

Your snails show up? Still waiting on my single...

Sent from my SM-G955U using Tapatalk

Not yet, hopefully early May after I do my fuel system upgrades.


Sent from my iPhone using Tapatalk

xxAGAVExx Journal
 

Walbro 450 fuel pump installed and housing modified for fuel return system. A lot more intricate modifications than I expected, took all day. The rest of the fuel return system will have to wait a few more weeks until I can get at it again.
https://uploads.tapatalk-cdn.com/202...4f510a67c7.jpg

https://uploads.tapatalk-cdn.com/202...f8ace7712d.jpg
https://uploads.tapatalk-cdn.com/202...6423443786.jpg


Sent from my iPhone using Tapatalk

Close to finishing the fuel system. Ran the new fuel line and got the injectors wired. Just have to finish installing injectors, rails and regulator and pray she’ll start.https://uploads.tapatalk-cdn.com/202...74ddca95d3.jpg
https://uploads.tapatalk-cdn.com/202...cedd812ce7.jpg
https://uploads.tapatalk-cdn.com/202...73e3eea2e9.jpg
https://uploads.tapatalk-cdn.com/202...1a8b4abd9f.jpg


Sent from my iPhone using Tapatalk

xxAGAVExx Journal
 

The rest of the kit came in. Got the IC installed today, hopefully I can run some of the piping tomorrow and finish the install next weekend.

https://uploads.tapatalk-cdn.com/202...2d47c3c0b9.jpg

https://uploads.tapatalk-cdn.com/202...f2a0955830.jpg
https://uploads.tapatalk-cdn.com/202...b307516ab2.jpg
https://uploads.tapatalk-cdn.com/202...8e771db808.jpg
https://uploads.tapatalk-cdn.com/202...93f1114c09.jpg


Sent from my iPhone using Tapatalk

Finally making some more progress, kit is definitely a tight fit, but I think I got all the difficult piping done, so the rest should go a lot easier.
https://uploads.tapatalk-cdn.com/202...bcfe76ac4d.jpg
https://uploads.tapatalk-cdn.com/202...db8821167f.jpg



Sent from my iPhone using Tapatalk

Only a few pipes left to install
https://uploads.tapatalk-cdn.com/202...cfd631a5b7.jpg


Sent from my iPhone using Tapatalk

Damn near a 7 month delay between the last parts arriving and additional progress, you all good?

also did you pick up the F.I. crash bar? you should.

xxAGAVExx Journal
 

Lol, just can never get the time to work on it, been crazy worth work lately, but finally got back after it. No FI crash bar, but if it fits this kit I’ll definitely order one.


Sent from my iPhone using Tapatalk

It fits, you may have to do a little grinding on one or two of the FI bolt holes to line it all up. Maybe some washers too.