NOVA/DC/MD - Z's & Coffee, Saturdays at 10AM in [WHERE?!], VA & Columbia, MD

StangerGT

One good example of the nonsense...

Brake Tech - Brake Rotors and Track Use

"Slotted, drilled or dimpled rotors offered as OEM replacements should not be considered appropriate for high-speed track use.

While grooved, drilled and slotted rotors offer an enhanced appearance and add some resistance to the boundary layer of gasses that can build up between the pad and rotor, they are not designed to withstand the extreme temperatures that are produced on the racetrack. If they are used on the track, it is very important that the rotors be carefully inspected and should not be driven on if even minor signs of deterioration are seen. Note, too, that if these products are used on the track they are not warrantable."

__________________
Maximum Motorsports Susp. | MM Adj. Rear LCA | MM CC Plates | MM Front Coilovers 350lb | MM Rear 500lb Springs | Full Cobra Brakes | FR 3.73 Gears | FR LSD/31 Spline | JPC/SCT Tune | MGW Short Shifter | Star Spec 265/35/18x9 F - 275/35/18x10 R | stock exhaust lolz