The New "What did you do with your Z today" (with off topic replies) VII

blackcherry20 · 08-14-2013, 11:00 AM

Quote:

Originally Posted by ZMan8

he Zman!! what you doing today?

ZMan8 · 08-14-2013, 11:02 AM

Quote:

Originally Posted by blackcherry20

he Zman!! what you doing today?

I'm being busy today

Had a meeting with the CFO in the early morning, now will be doing some work. in 2 hours I get to go grab lunch with my previous job's coworkers.

Tonight I get to tackle the toe bolt install on the Z (hopefully I have enough light remaining in the day)

How are you?

kenchan · 08-14-2013, 11:08 AM

mr.zman!

sounds like a busy day.

uhhh.... do you need stillen swaybars?

ZMan8 · 08-14-2013, 11:20 AM

Quote:

Originally Posted by kenchan

mr.zman!

sounds like a busy day.

uhhh.... do you need stillen swaybars?

I eventually want sway bars. Though I haven't settled on a brand yet.

kenchan · 08-14-2013, 11:22 AM

Quote:

Originally Posted by ZMan8

I eventually want sway bars. Though I haven't settled on a brand yet.

oh you want the red ones unused in a box on my parts shelf.

JARblue · 08-14-2013, 11:24 AM

Quote:

Originally Posted by kenchan

oh you want the red ones unused in a box on my parts shelf.

I thought those were installed in your parts bin to stabilize it better

ZMan8 · 08-14-2013, 11:27 AM

Quote:

Originally Posted by kenchan

oh you want the red ones unused in a box on my parts shelf.

Are the Stillen bars considered good?

Quote:

Originally Posted by JARblue

I thought those were installed in your parts bin to stabilize it better

kenchan · 08-14-2013, 11:30 AM

Quote:

Originally Posted by JARblue

I thought those were installed in your parts bin to stabilize it better

blahaha!! i better not take it off then.

Quote:

Originally Posted by ZMan8

Are the Stillen bars considered good?

no they are absolutely terrible. do you still want it?

the plan was to use just the front if the kangaroo-built whiteline junk didn't hold up. after the adjustment it appears to be holding up so, this is why the stillen is just sitting there on my parts bin.

ZMan8 · 08-14-2013, 11:40 AM

Quote:

Originally Posted by kenchan

blahaha!! i better not take it off then.

no they are absolutely terrible. do you still want it?

the plan was to use just the front if the kangaroo-built whiteline junk didn't hold up. after the adjustment it appears to be holding up so, this is why the stillen is just sitting there on my parts bin.

Well stillen seems to be hit or miss with some things.
Hit with Gen 3 intakes
hit or miss with supercharger
miss with poor fitting exhaust
miss with sagging front lip
miss with poorly fitting front fascia

kenchan · 08-14-2013, 11:40 AM

so i saw this new fiat suv looking thing this am.

wow, like a joke version of the MINI's suv looking thing.

wish MINI would clean up their design to where they were back in early 2000.

kenchan · 08-14-2013, 11:43 AM

Quote:

Originally Posted by ZMan8

Well stillen seems to be hit or miss with some things.
Hit with Gen 3 intakes
hit or miss with supercharger
miss with poor fitting exhaust
miss with sagging front lip
miss with poorly fitting front fascia

yah... i run stillen bars on my G35C along with rear camber rods, and they are very good.

on the Z though i dont know yet, but at least the front torsion rates are similar to the whitelines, and use stock bushings so that is two pluses right there.

i dont plan on using the rear bar on my stock setup. it's really only the front that the stock setting needs a tad less sway.

ZMan8 · 08-14-2013, 11:49 AM

Quote:

Originally Posted by kenchan

yah... i run stillen bars on my G35C along with rear camber rods, and they are very good.

on the Z though i dont know yet, but at least the front torsion rates are similar to the whitelines, and use stock bushings so that is two pluses right there.

i dont plan on using the rear bar on my stock setup. it's really only the front that the stock setting needs a tad less sway.

Hmm perhaps down the road I may take the stillen off your hands. Right now though its not a priority (new house and all)

Huck · 08-14-2013, 12:36 PM

Afternoon kids! I haven't been in here in a while, I feel like I'm neglecting you all hahaha. With my job it's hard to carry a convo though cause I'm always getting called to go over here or go do this or that.

Anyway, what's good today?

I survived Zdayz 2013... (barely)

kenchan · 08-14-2013, 12:54 PM

Quote:

Originally Posted by ZMan8

Hmm perhaps down the road I may take the stillen off your hands. Right now though its not a priority (new house and all)

... do you need crib/babybed for future baby?

onzedge · 08-14-2013, 01:02 PM

Quote:

Originally Posted by Huck

Afternoon kids! I haven't been in here in a while, I feel like I'm neglecting you all hahaha. With my job it's hard to carry a convo though cause I'm always getting called to go over here or go do this or that.

Anyway, what's good today?

I survived Zdayz 2013... (barely)

What the Huck???

08-14-2013, 12:36 PM	#2083 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Afternoon kids! I haven't been in here in a while, I feel like I'm neglecting you all hahaha. With my job it's hard to carry a convo though cause I'm always getting called to go over here or go do this or that. Anyway, what's good today? I survived Zdayz 2013... (barely) __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) VI	Pintsize725	The Lounge (Off Topic)	10005	07-30-2013 06:57 AM
The New "What did you do with your Z today" (with off topic replies) IV	happytheman	The Lounge (Off Topic)	10020	04-09-2013 11:47 AM
The New "What did you do with your Z today" (with off topic replies) III	happytheman	The Lounge (Off Topic)	9956	02-10-2013 02:13 PM
The New "What did you do with your Z today" (with off topic replies) II	happytheman	The Lounge (Off Topic)	10004	12-24-2012 07:31 PM
The New "What did you do with your Z today" (with off topic replies)	happytheman	The Lounge (Off Topic)	10265	10-31-2012 11:15 PM

08-14-2013, 11:08 AM	#2073 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	mr.zman! sounds like a busy day. uhhh.... do you need stillen swaybars?

08-14-2013, 11:40 AM	#2080 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	so i saw this new fiat suv looking thing this am. wow, like a joke version of the MINI's suv looking thing. wish MINI would clean up their design to where they were back in early 2000.