Occupation of 370Z heads

o0javi0o · 12-23-2008, 07:30 PM

On the Week: Civil Engineer, Structural Engineer with Master in Engineering Management, ACI and PCI Certified.

Working in a Structural Engineering firm designing Pre-Stressed and Precast products for highways and other structural elements such as Piles, Bearing Walls, Columns, Single Beams, Steel Frames, Girders, Steel Beams, Plates, Steel Connections, Bolt Capacities, preparing some CPMs, Scheduling, Permitting, Cost Estimations, etc.
Also as ACI certified, I have to go to the Field and do DOT inspections on concrete samples, concrete design mix , Slump Tests, Water/Cement Ratios, Compression Test at 24 hr, 7, 14 and 28 days for the Beams that have been produced, and some extra cool stuff.

On Weekends: Dj, Trance Progressive, Progressive-Electro House

!!

yep designing bridges, and some curves to enjoy our rides in the Z

and doing some music to enjoy more the ride

!!!

18rgcelica73 · 12-23-2008, 08:06 PM

^ Damn busy guy. Right on my man.

LiquidZ · 12-23-2008, 10:08 PM

Quote:

Originally Posted by o0javi0o

On the Week: Civil Engineer, Structural Engineer with Master in Engineering Management, ACI and PCI Certified.

Working in a Structural Engineering firm designing Pre-Stressed and Precast products for highways and other structural elements such as Piles, Bearing Walls, Columns, Single Beams, Steel Frames, Girders, Steel Beams, Plates, Steel Connections, Bolt Capacities, preparing some CPMs, Scheduling, Permitting, Cost Estimations, etc.
Also as ACI certified, I have to go to the Field and do DOT inspections on concrete samples, concrete design mix , Slump Tests, Water/Cement Ratios, Compression Test at 24 hr, 7, 14 and 28 days for the Beams that have been produced, and some extra cool stuff.

On Weekends: Dj, Trance Progressive, Progressive-Electro House

!!

yep designing bridges, and some curves to enjoy our rides in the Z

and doing some music to enjoy more the ride

!!!

Get me a job?

o0javi0o · 12-24-2008, 01:29 PM

Quote:

Originally Posted by LiquidZ

Get me a job?

Lol, I could refer you, but everything is like very slow, but very very slow. The buzz is saying that by mid 2009 construction will be moving again but in slows steps.
A lot of bidding are happening right now in Orlando, FL and south Florida, specially in West Palm Beach, Palm Beach and like always, Miami lol. So, lets see whats coming up in this 2009, hopefully, we are going to hit the big numbers.
Skanka, Jacobs, Boyle Engineering, Turner, RS and H, etc...

dutty370Z · 12-23-2008, 10:15 PM

Quote:

Originally Posted by o0javi0o

On the Week: Civil Engineer, Structural Engineer with Master in Engineering Management, ACI and PCI Certified.

Working in a Structural Engineering firm designing Pre-Stressed and Precast products for highways and other structural elements such as Piles, Bearing Walls, Columns, Single Beams, Steel Frames, Girders, Steel Beams, Plates, Steel Connections, Bolt Capacities, preparing some CPMs, Scheduling, Permitting, Cost Estimations, etc.
Also as ACI certified, I have to go to the Field and do DOT inspections on concrete samples, concrete design mix , Slump Tests, Water/Cement Ratios, Compression Test at 24 hr, 7, 14 and 28 days for the Beams that have been produced, and some extra cool stuff.

On Weekends: Dj, Trance Progressive, Progressive-Electro House

!!

yep designing bridges, and some curves to enjoy our rides in the Z

and doing some music to enjoy more the ride

!!!

wow... and all i do is make f$^king webpages...

o0javi0o · 12-24-2008, 01:19 PM

Quote:

Originally Posted by dutty370Z

wow... and all i do is make f$^king webpages...

Keep in mind men, that you are busy right now in this days when economy is like.... DOOM. Annnnnnnnd
I want to know more info in this so. PM please!!!!!

nogoodname · 12-24-2008, 11:12 AM

Quote:

Originally Posted by LiquidZ

Same! Graduating next quarter from Ohio State.

I'm specializing in construction management.

I'm just starting....

Quote:

Originally Posted by o0javi0o

On the Week: Civil Engineer, Structural Engineer with Master in Engineering Management, ACI and PCI Certified.

yep designing bridges, and some curves to enjoy our rides in the Z

and doing some music to enjoy more the ride

!!!

I'll be happy to do that....lol

o0javi0o · 12-24-2008, 01:16 PM

Quote:

Originally Posted by nogoodname007

I'm just starting....

I'll be happy to do that....lol

lol!, you will be. as soon as you graduate, depending on the field you get a job, you will be doing it bro.

Try Lane Construction, PLC, TLC Engineering, Palmer, and other engineering firms men, they are great.

juan05 · 04-13-2009, 05:13 PM

Quote:

Originally Posted by o0javi0o

On the Week: Civil Engineer, Structural Engineer with Master in Engineering Management, ACI and PCI Certified.

Working in a Structural Engineering firm designing Pre-Stressed and Precast products for highways and other structural elements such as Piles, Bearing Walls, Columns, Single Beams, Steel Frames, Girders, Steel Beams, Plates, Steel Connections, Bolt Capacities, preparing some CPMs, Scheduling, Permitting, Cost Estimations, etc.
Also as ACI certified, I have to go to the Field and do DOT inspections on concrete samples, concrete design mix , Slump Tests, Water/Cement Ratios, Compression Test at 24 hr, 7, 14 and 28 days for the Beams that have been produced, and some extra cool stuff.

On Weekends: Dj, Trance Progressive, Progressive-Electro House

!!

yep designing bridges, and some curves to enjoy our rides in the Z

and doing some music to enjoy more the ride

!!!

right on!! just wondering did you go to ultrafest 2009 in miami. great music i was there

o0javi0o · 04-14-2009, 10:05 AM

Quote:

Originally Posted by juan05

right on!! just wondering did you go to ultrafest 2009 in miami. great music i was there

nice bro. I just wanted to go, I was even trying to do some plans with members in here to meet there, But I am very busy working right now. I am flying every week to Puerto Rico because I am working in some projects here and there, not to much time but whatever

I like it tho.

scorpion90 · 04-14-2009, 02:44 PM

Principal Engineer for Goodyear Tire & Rubber. 41 years experience at same company!

Canadian370Z · 04-14-2009, 02:45 PM

Graphic Designer

spearfish25 · 04-14-2009, 03:18 PM

Quote:

Originally Posted by scorpion90

Principal Engineer for Goodyear Tire & Rubber. 41 years experience at same company!

Does that mean you left the Bridgestones on the car or swapped them out???

scorpion90 · 04-15-2009, 11:44 AM

Quote:

Originally Posted by spearfish25

Does that mean you left the Bridgestones on the car or swapped them out???

I never recommend swapping out OE tires since they are the cream of the crop for uniformity. It is common practice in the industry to send the best uniformity tires to OE and rest are down streamed for consumer sale. If the tire line is not designed for OE use, then chances are better for after market uniformity since the best aren't sent to the OE customer. Having said that, there are some non OE tires that are better trade offs for traction and treadwear since rolling resistance isn't a top requirement for acceptance.

Bridgestones will be left on car until worn out.

37Z · 07-07-2009, 07:57 PM

Quote:

Originally Posted by scorpion90

Principal Engineer for Goodyear Tire & Rubber. 41 years experience at same company!

Anything new from GOODYEAR for the 370Z?

12-23-2008, 08:06 PM	#2 (permalink)
18rgcelica73 Enthusiast Member Join Date: Dec 2008 Location: Fresno Posts: 330 Drives: 03 ep3 vbp 6speed Rep Power: 18	^ Damn busy guy. Right on my man. __________________ I have a 350rwhp 1973 18rg turbo powered Toyota celica, a 2003 civic si which will be my down payment for a beautiful MONTEREY BLUE 370z. THE370Z.COM F'IN RULES!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-23-2008, 07:30 PM	#1 (permalink)
o0javi0o Enthusiast Member Join Date: Nov 2008 Location: Dallas, Tx Posts: 458 Drives: '15 ///M3 6MT Rep Power: 18	On the Week: Civil Engineer, Structural Engineer with Master in Engineering Management, ACI and PCI Certified. Working in a Structural Engineering firm designing Pre-Stressed and Precast products for highways and other structural elements such as Piles, Bearing Walls, Columns, Single Beams, Steel Frames, Girders, Steel Beams, Plates, Steel Connections, Bolt Capacities, preparing some CPMs, Scheduling, Permitting, Cost Estimations, etc. Also as ACI certified, I have to go to the Field and do DOT inspections on concrete samples, concrete design mix , Slump Tests, Water/Cement Ratios, Compression Test at 24 hr, 7, 14 and 28 days for the Beams that have been produced, and some extra cool stuff. On Weekends: Dj, Trance Progressive, Progressive-Electro House !! yep designing bridges, and some curves to enjoy our rides in the Z and doing some music to enjoy more the ride !!!

04-14-2009, 02:44 PM	#11 (permalink)
scorpion90 Base Member Join Date: Jan 2009 Location: Akron, Ohio Age: 78 Posts: 109 Drives: 370Z Base 7AT+Sports Rep Power: 285	Principal Engineer for Goodyear Tire & Rubber. 41 years experience at same company!

04-14-2009, 02:45 PM	#12 (permalink)
Canadian370Z Base Member Join Date: Feb 2009 Location: Fort Saskatchewan Posts: 138 Drives: 09 Nissan 370Z 7AT Rep Power: 18	Graphic Designer