The New "What did you do with your Z today" (with off topic replies) V

kenchan · 05-20-2013, 11:34 AM

Quote:

Originally Posted by LMBmikeZ

That's exactly what I was thinking, I am probably also going to make a bunch of other things now that the bench turned out good

I hate the cheap fake wood everything is made of now a days

Yes both my wife and I are very excited

to have our first kid, everything is falling into place we wanted to move in to the new house and start trying so looks like things are working out and I couldn't be happier

( Click to show/hide )

for smoooooth preparation.

i remember a local guy that moved at the very last minute (like a day before kid was born) and i was like wtf are you doing to your wife??!

it's already bad enough that it's going to be their first child so tensions were already high, now moving to a new unfamiliar house that needs work? im like do you know what "preparation" means?!

lol

LMBmikeZ · 05-20-2013, 11:36 AM

that would not be good for the wife or the baby on the way

we have been here 5 months now and I have done lots of projects already, hopefully I can get a bunch more of them done before the early december due date

GaleForce · 05-20-2013, 11:36 AM

Quote:

Originally Posted by LMBmikeZ

a good RO polisher will pay for itself just in the time it saves you!

I have both rotary and RO and I use my RO all the time, rotary is only for the heavy stuff or if doing a full out 3 stage polish

You need to come over some time and give my Rupes Bigfoot a try. You'll

It's a game changer.

LMBmikeZ · 05-20-2013, 11:38 AM

looks very nice

LMBmikeZ · 05-20-2013, 11:39 AM

I just have the griots RO with 3" and 6" backing plates and pads, and then I have a big Makita Rotary for big work with 6" and 8" plates and pads both are for the lake country pad system

blackcherry20 · 05-20-2013, 11:40 AM

ok, back to it. sigh.
see you guys this evening. Mini has ball practice which means I have 1.5 hours to

kenchan · 05-20-2013, 11:41 AM

Quote:

Originally Posted by Haboob

It depends, it can get down to the mid-high 30's. Usually sustains around low 40's-50's.

Which I know isn't cold to most, but when the prior week it was 85, then all of the sudden it's 50, your body goes into shock.

That and the Summer heat thins out your blood, a lot.

As for the map light, if I put it on the inside, it may darken it a little bit, but if I put it on the outside it may blend the map lights into the plastic housing a bit - could look pretty neat.

hahaha, yah, mid-30's, im washing my car outside on my driveway.
your summers are incredibly hot vs our summers here.

ahh, yah, on the outside i suppose it could bend with the trim.

but if you were going to do that, wouldn't the stock frosted lens work just as well?

Quote:

Originally Posted by blackcherry20

THat RO may end up on a list for hubby (for me from hubby!)

i asked my wife i want a wiha extra heavy duty screw driver set for f-day and it already arrived.

silly me, i already cleared a drawer in my tool case for them.

still got a couple weeks to go though...

Quote:

Originally Posted by LMBmikeZ

nice

and with RO you don't have to worry so much about damaging the clear coat on your paint you won't burn through inless you held it in one spot for a LONG LONG TIME!

imho, using RO is safer than spot polishing by hand because the rotation is always even vs doing a karate kid motion by hand. polish on, paint off.

LMBmikeZ · 05-20-2013, 11:42 AM

Quote:

Originally Posted by blackcherry20

ok, back to it. sigh.
see you guys this evening. Mini has ball practice which means I have 1.5 hours to

Me to back out to the garage to see if I can do any more prep before I start to paint

LMBmikeZ · 05-20-2013, 11:43 AM

Quote:

Originally Posted by kenchan

i asked my wife i want a wiha extra heavy duty screw driver set for f-day and it already arrived.

silly me, i already cleared a drawer in my tool case for them.

still got a couple weeks to go though...

imho, using RO is safer than spot polishing by hand because the rotation is always even vs doing a karate kid motion by hand. polish on, paint off.

to the screwdriver set

RO is probably the safest way to polish a car

kenchan · 05-20-2013, 11:44 AM

Quote:

Originally Posted by LMBmikeZ

that would not be good for the wife or the baby on the way

we have been here 5 months now and I have done lots of projects already, hopefully I can get a bunch more of them done before the early december due date

now that's good preparation.

Quote:

Originally Posted by GaleForce

You need to come over some time and give my Rupes Bigfoot a try. You'll

It's a game changer.

is that the one that can handle 12" pads?

lol, imagine someone polishing their cars with a 12" pad.

Quote:

Originally Posted by blackcherry20

ok, back to it. sigh.
see you guys this evening. Mini has ball practice which means I have 1.5 hours to

laterz, msbc!

LMBmikeZ · 05-20-2013, 11:47 AM

12" pad would be ok if you had a big old boat of a car like a town car or a big caddy with large flat body panels

not much else a 12" pad would be good for........I hardly use my 8" pads even..... I think they have only been used on my buddies boat

LMBmikeZ · 05-20-2013, 11:49 AM

K I gtg back to work, only so many hours left until day is done

kenchan · 05-20-2013, 11:49 AM

Quote:

Originally Posted by LMBmikeZ

Me to back out to the garage to see if I can do any more prep before I start to paint

nice!

i need to vac my garage pretty soon. i sprayed some scentless/colorless insect spray yesterday to prevent spiders and stuff. already i saw these tiny spiders making their webs without paying any rent.

kenchan · 05-20-2013, 11:50 AM

Quote:

Originally Posted by LMBmikeZ

K I gtg back to work, only so many hours left until day is done

laterz!

Haboob · 05-20-2013, 11:59 AM

Quote:

Originally Posted by kenchan

hahaha, yah, mid-30's, im washing my car outside on my driveway.
your summers are incredibly hot vs our summers here.

ahh, yah, on the outside i suppose it could bend with the trim.

but if you were going to do that, wouldn't the stock frosted lens work just as well?

I still have the stock frosted ones.

Quote:

Originally Posted by LMBmikeZ

K I gtg back to work, only so many hours left until day is done

05-20-2013, 11:36 AM	#8237 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	that would not be good for the wife or the baby on the way we have been here 5 months now and I have done lots of projects already, hopefully I can get a bunch more of them done before the early december due date kenchan and blackcherry20 like this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

05-20-2013, 11:38 AM	#8239 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	looks very nice __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

05-20-2013, 11:39 AM	#8240 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	I just have the griots RO with 3" and 6" backing plates and pads, and then I have a big Makita Rotary for big work with 6" and 8" plates and pads both are for the lake country pad system GaleForce likes this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

05-20-2013, 11:40 AM	#8241 (permalink)
blackcherry20 A True Z Fanatic Join Date: May 2012 Location: Southern Ohio Posts: 22,749 Drives: ‘17 badazz Z51 Rep Power: 240460	ok, back to it. sigh. see you guys this evening. Mini has ball practice which means I have 1.5 hours to kenchan and LMBmikeZ like this. __________________ Grand Sport Corvette Arctic White

05-20-2013, 11:47 AM	#8246 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	12" pad would be ok if you had a big old boat of a car like a town car or a big caddy with large flat body panels not much else a 12" pad would be good for........I hardly use my 8" pads even..... I think they have only been used on my buddies boat __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

05-20-2013, 11:49 AM	#8247 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	K I gtg back to work, only so many hours left until day is done __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) IV	happytheman	The Lounge (Off Topic)	10020	04-09-2013 11:47 AM
The New "What did you do with your Z today" (with off topic replies) III	happytheman	The Lounge (Off Topic)	9956	02-10-2013 02:13 PM
The New "What did you do with your Z today" (with off topic replies) II	happytheman	The Lounge (Off Topic)	10004	12-24-2012 07:31 PM
The New "What did you do with your Z today" (with off topic replies)	happytheman	The Lounge (Off Topic)	10265	10-31-2012 11:15 PM
We learned a valuable lesson about the "VDC OFF" button today thanks to b1ades	birdmanx1	Mid-Atlantic Region	167	09-01-2011 09:50 AM