Anyone here into firearms?

Nismo89 · 04-28-2015, 10:20 PM

Quote:

Originally Posted by 6MT

A little milsurp love...

dude........... yes.

6MT · 04-27-2015, 02:57 AM

...and a little Springfield love...

Nismo89 · 04-28-2015, 10:22 PM

Rusty · 04-28-2015, 10:46 PM

Be the worst shot in the world and still kill it.

6MT · 05-13-2015, 05:49 PM

Ok, here's the first (I think) Sightron SVSS 10-50x60 mounted on a rifle in Canada (?). Well, I might be wrong about that claim, but anyways... On top of a Near Alpha MD34 x 1.25 TaCap mount on a PGW Coyote rifle. Now, I won't get a chance to try it out until after June 1st because my range is closed for reno's and re-certification. But boy, I can't wait!! (Since the rifle is also new.)

btw, it's a .308

6MT · 05-22-2015, 10:46 PM

Quote:

Originally Posted by 6MT

Ok, here's the first (I think) Sightron SVSS 10-50x60 mounted on a rifle in Canada (?). Well, I might be wrong about that claim, but anyways... On top of a Near Alpha MD34 x 1.25 TaCap mount on a PGW Coyote rifle. Now, I won't get a chance to try it out until after June 1st because my range is closed for reno's and re-certification. But boy, I can't wait!! (Since the rifle is also new.)

btw, it's a .308

Took this out to 1200m today! What a blast!

Rusty · 05-23-2015, 06:42 AM

Quote:

Originally Posted by 6MT

Took this out to 1200m today! What a blast!

Might be a nice shootin' rifle. But not a fan of twisted fluted barrels.

Sorry.

Tigger · 05-13-2015, 07:17 PM

I love anything in the 7.62 realm. Very cool rifle. Hope she treats you well!

SouthArk370Z · 05-13-2015, 08:32 PM

Any recommendations for places to buy miscellaneous AR-15/M-16 parts online?

I've found upper/lower receivers, internals for those and barrel/gasblock/tube locally but am having problems locating some of the "little" things like forestock delta ring/retainer (but was able to find the spring and front retainer, go figure), nut for flash suppressor (I prefer that to a crush washer), plain-jane forestock for 20" barrel, old-style fixed buttstock with storage, &c.

TIA

Tigger · 05-13-2015, 09:04 PM

Quote:

Originally Posted by SouthArk370Z

Any recommendations for places to buy miscellaneous AR-15/M-16 parts online?

I've found upper/lower receivers, internals for those and barrel/gasblock/tube locally but am having problems locating some of the "little" things like forestock delta ring/retainer (but was able to find the spring and front retainer, go figure), nut for flash suppressor (I prefer that to a crush washer), plain-jane forestock for 20" barrel, old-style fixed buttstock with storage, &c.

TIA

Armalite.

Rusty · 05-18-2015, 12:24 AM

Quote:

Originally Posted by SouthArk370Z

Any recommendations for places to buy miscellaneous AR-15/M-16 parts online?

I've found upper/lower receivers, internals for those and barrel/gasblock/tube locally but am having problems locating some of the "little" things like forestock delta ring/retainer (but was able to find the spring and front retainer, go figure), nut for flash suppressor (I prefer that to a crush washer), plain-jane forestock for 20" barrel, old-style fixed buttstock with storage, &c.

TIA

Here.

http://www.brownells.com/search/inde...arts&ksubmit=y

synolimit · 05-16-2015, 09:00 AM

Keep loading?

Yesterday I finished my testing with some reloads I wasn't supposed to do. I posted before about AA4064 and some people including Accurate said it wasn't tested but pressures should be there etc etc. AA4064 was the only thing on the shelf and with so many saying it's like IMR4064 which does have manual loading data, I'm stubborn and just wanted to do it!

I tested before with Hornady 75gr BTHP with 22.5gr, 23.5gr, 24.0gr and 24.5gr but the sun was messing up my Pro Chrono for more then half the shots. Hell all the 22.5gr loads said 1400-1500ftps haha. So I went out again with just 24.0gr as I determened that was best based on cases fired, some velocities, and frankly I just couldnt do 24.5gr because they were so compressed in the brass the hollow point was deforming from the die making the OAL over 2.26" as it squeezed the tip longer an pinched the sides.

With the 24.0gr I can only load LC brass with the 75gr's. All others and .223 brass has the powder filling the case all the way up into the neck. Even with LC brass the loads still compressed but hey, some like that.

I shot 10 rounds before moving to sighting in, I was at 15 feet with a Pro Chrono Pal, at 52 degrees outside with my HM Defence triple hone 1:8 16" barrel, again shooting AA4064 with LC brass and Hornady 75gr BTHP. Pretty close!

1. 2469
2. 2455
3. 2455
4. 2469
5. 2460
6. 2460
7. 2450
8. 2473
9. 2492
10. 2487

I was hoping for 2500ftps but I guess close enough d/t powder and bullet weight. The gun was sighted in for some older loads of I think Hornady 68gr BTHP and H322 which is a crazy fast powder.

First 2 shots not bad for no sighting in!

The wife also had some nice shots with a nice group!

Only thing I'm worried about is we shot about 90 rounds. The more we shot the more off we got. Anyone have a clue why that is? It did heat up closer to 60*, the wind was blowing at times, and I do have a $100 UTG scope. By the last 5 rounds I was down about 2" and had to click up on the scope. Something tells me the scopes not perfect for a ton of shots. Should I keep loading and not worry? Long as she can head shot with this rifle we built, she and I will be happy.

SouthArk370Z · 05-16-2015, 01:12 PM

Let the barrel cool off and see if it's still shooting "wild." If so, I'd try giving the barrel a good cleaning. If that doesn't help, I'd look at the scope, bedding, &c.

synolimit · 05-16-2015, 03:22 PM

Quote:

Originally Posted by SouthArk370Z

Let the barrel cool off and see if it's still shooting "wild." If so, I'd try giving the barrel a good cleaning. If that doesn't help, I'd look at the scope, bedding, &c.

Not wild but low. Back home now, all clean etc. if it was the gun then next time out I'll be low. If its on still then it's gotta be the scope right? I did have 2 10-15 round full bursts so the scope did see some vibration.

Rusty · 05-18-2015, 12:32 AM

Quote:

Originally Posted by Scott@Synergy

Not wide but low. Back home now, all clean etc. if it was the gun then next time out I'll be low. If its on still then it's gotta be the scope right? I did have 2 10-15 round full bursts so the scope did see some vibration.

Make sure your barrel nut is tight, and your scope mounts. Look into your scope through the big end. As you are looking through it. Focus on the cross hairs. Now tap the side of the scope to see if the cross hairs wiggle.

04-27-2015, 02:57 AM	#2 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1791	...and a little Springfield love... __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

04-28-2015, 10:22 PM	#3 (permalink)
Nismo89 A True Z Fanatic Join Date: Mar 2011 Location: Colora, MD Age: 36 Posts: 15,831 Drives: daily Zen and woosah Rep Power: 37387	__________________ Why yes.. Mike Rowe of Dirty Jobs, The Ford Commericals,Deadliest Catch.. is my cousin. Facebook i outta back hand you with my right hand! and call you b*tch!..... and im Left handed!

04-28-2015, 10:46 PM	#4 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,505 Drives: 2011 Nismo GM 6M Rep Power: 2684439	Be the worst shot in the world and still kill it. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-13-2015, 05:49 PM	#5 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1791	Ok, here's the first (I think) Sightron SVSS 10-50x60 mounted on a rifle in Canada (?). Well, I might be wrong about that claim, but anyways... On top of a Near Alpha MD34 x 1.25 TaCap mount on a PGW Coyote rifle. Now, I won't get a chance to try it out until after June 1st because my range is closed for reno's and re-certification. But boy, I can't wait!! (Since the rifle is also new.) btw, it's a .308 __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D Last edited by 6MT; 05-13-2015 at 09:50 PM.

05-13-2015, 08:32 PM	#9 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Any recommendations for places to buy miscellaneous AR-15/M-16 parts online? I've found upper/lower receivers, internals for those and barrel/gasblock/tube locally but am having problems locating some of the "little" things like forestock delta ring/retainer (but was able to find the spring and front retainer, go figure), nut for flash suppressor (I prefer that to a crush washer), plain-jane forestock for 20" barrel, old-style fixed buttstock with storage, &c. TIA __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

05-13-2015, 07:17 PM	#8 (permalink)
Tigger A True Z Fanatic Join Date: Mar 2013 Location: NM Posts: 8,063 Drives: Awedeeeeee Rep Power: 603	I love anything in the 7.62 realm. Very cool rifle. Hope she treats you well!

05-16-2015, 09:00 AM	#12 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3390	Keep loading? Yesterday I finished my testing with some reloads I wasn't supposed to do. I posted before about AA4064 and some people including Accurate said it wasn't tested but pressures should be there etc etc. AA4064 was the only thing on the shelf and with so many saying it's like IMR4064 which does have manual loading data, I'm stubborn and just wanted to do it! I tested before with Hornady 75gr BTHP with 22.5gr, 23.5gr, 24.0gr and 24.5gr but the sun was messing up my Pro Chrono for more then half the shots. Hell all the 22.5gr loads said 1400-1500ftps haha. So I went out again with just 24.0gr as I determened that was best based on cases fired, some velocities, and frankly I just couldnt do 24.5gr because they were so compressed in the brass the hollow point was deforming from the die making the OAL over 2.26" as it squeezed the tip longer an pinched the sides. With the 24.0gr I can only load LC brass with the 75gr's. All others and .223 brass has the powder filling the case all the way up into the neck. Even with LC brass the loads still compressed but hey, some like that. I shot 10 rounds before moving to sighting in, I was at 15 feet with a Pro Chrono Pal, at 52 degrees outside with my HM Defence triple hone 1:8 16" barrel, again shooting AA4064 with LC brass and Hornady 75gr BTHP. Pretty close! 1. 2469 2. 2455 3. 2455 4. 2469 5. 2460 6. 2460 7. 2450 8. 2473 9. 2492 10. 2487 I was hoping for 2500ftps but I guess close enough d/t powder and bullet weight. The gun was sighted in for some older loads of I think Hornady 68gr BTHP and H322 which is a crazy fast powder. First 2 shots not bad for no sighting in! The wife also had some nice shots with a nice group! Only thing I'm worried about is we shot about 90 rounds. The more we shot the more off we got. Anyone have a clue why that is? It did heat up closer to 60, the wind was blowing at times, and I do have a $100 UTG scope. By the last 5 rounds I was down about 2" and had to click up on the scope. Something tells me the scopes not perfect for a ton of shots. Should I keep loading and not worry? Long as she can head shot with this rifle we built, she and I will be happy. __________________ 13 370z- Last edited by synolimit; 05-16-2015 at 09:05 AM.*

05-16-2015, 01:12 PM	#13 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Let the barrel cool off and see if it's still shooting "wild." If so, I'd try giving the barrel a good cleaning. If that doesn't help, I'd look at the scope, bedding, &c. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode