The 370z Useless Thread (Coors Lite version)

phelan · 09-18-2009, 02:02 PM

They work great! I'm actually surprised you didn't get the camber arms with the Eibachs, they threw my alignment completely off. I had some nasty neg. camber coming out of the install, and there was plenty of adjustment capability to bring them back to stock.

Lou was telling me (as I was watching) that the SPC arms do require a bit of drilling to install correctly though.

XwChriswX · 09-18-2009, 02:07 PM

Ok, I'm not looking to break the bank, and my car won't ever see a street track (maybe some strip runs, or highway racing lol) But I'd at least like to lower it, and if I get a better suspension in the process alright. My point...

Should I stick with just springs and cam's or go with coilovers and not half *** it? Cause I wanna get the Tein ones with the EDFC so I can control the ride in the car and raise/lower it at will... But thats gonna come with a hefty pricetag lol.

I just dunno what to doooo!

bigaudiofanat · 09-18-2009, 02:08 PM

IMO the car's stance is just fine. I would not lower it at all. Also because of speed bumps.

frost · 09-18-2009, 02:09 PM

Quote:

Originally Posted by bigaudiofanat

IMO the car's stance is just fine. I would not lower it at all. Also because of speed bumps.

I dont mind the look. But I don't go over speed bumps at all. Once in the 4-5 ish months Ive owned it.

XwChriswX · 09-18-2009, 02:09 PM

Quote:

Originally Posted by bigaudiofanat

IMO the car's stance is just fine. I would not lower it at all. Also because of speed bumps.

Maybe I just need more face time with it to find out, and also once I actually have the rims I want based on the wheel/tire/well profile...

I know on my tC at least it should be dropped at least 1-1.5 inches... Sucks, but I'm not gonna put anymore money into it than I have to right now...

Caravanshaka · 09-18-2009, 02:12 PM

Quote:

Originally Posted by phelan

They work great! I'm actually surprised you didn't get the camber arms with the Eibachs, they threw my alignment completely off. I had some nasty neg. camber coming out of the install, and there was plenty of adjustment capability to bring them back to stock.

Lou was telling me (as I was watching) that the SPC arms do require a bit of drilling to install correctly though.

I decided I wanted to lower it and get an alignment before deciding if I need the arms, but I can tell the camber is nearing 3 degrees now, so I'm going to get them and install them along with the wheels (if they ever come) and get the alignment after that.

Where did it require drilling if you don't mind me asking? I'm assuming you mean the toe bolts that require drilling out the hole a little to add them in and not the actual arms that require drilling.

phelan · 09-18-2009, 02:14 PM

^ yea that's what i meant, sorry. friday stupidity

Caravanshaka · 09-18-2009, 02:15 PM

Quote:

Originally Posted by bigaudiofanat

IMO the car's stance is just fine. I would not lower it at all. Also because of speed bumps.

stance is great for stock wheels IMO. go aftermarket with more aggressive offset and I think the car look a lot better a little lower with a more aggressive stance to match.

Chris, if you aren't going to see track time, you won't ever use coilovers to their full advantage. I would suggest springs, rear camber arms, and maybe sway-bars if you want less body roll.

Caravanshaka · 09-18-2009, 02:16 PM

Quote:

Originally Posted by phelan

^ yea that's what i meant, sorry. friday stupidity

no problem...I'm hoping I don't need the toe bolts installed, I think there is enough adjustment stock to get it back to spec.

phelan · 09-18-2009, 02:16 PM

stance as in the car stance or stance coilovers O_o;

Caravanshaka · 09-18-2009, 02:17 PM

cars stance =P

phelan · 09-18-2009, 02:26 PM

guhhh i need a nap XD

XwChriswX · 09-18-2009, 02:28 PM

Quote:

Originally Posted by Caravanshaka

stance is great for stock wheels IMO. go aftermarket with more aggressive offset and I think the car look a lot better a little lower with a more aggressive stance to match.

Chris, if you aren't going to see track time, you won't ever use coilovers to their full advantage. I would suggest springs, rear camber arms, and maybe sway-bars if you want less body roll.

Figures... They just look cool! lol But yeah I plan on doin sway bars and all too.

XwChriswX · 09-18-2009, 02:28 PM

Quote:

Originally Posted by phelan

guhhh i need a nap xd

x 2

Caravanshaka · 09-18-2009, 02:30 PM

Quote:

Originally Posted by XwChriswX

x 2

x 3....just had to wake up a coworker that was nearly asleep on his keyboard

09-18-2009, 02:02 PM	#31036 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	They work great! I'm actually surprised you didn't get the camber arms with the Eibachs, they threw my alignment completely off. I had some nasty neg. camber coming out of the install, and there was plenty of adjustment capability to bring them back to stock. Lou was telling me (as I was watching) that the SPC arms do require a bit of drilling to install correctly though. __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

09-18-2009, 02:07 PM	#31037 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Ok, I'm not looking to break the bank, and my car won't ever see a street track (maybe some strip runs, or highway racing lol) But I'd at least like to lower it, and if I get a better suspension in the process alright. My point... Should I stick with just springs and cam's or go with coilovers and not half * it? Cause I wanna get the Tein ones with the EDFC so I can control the ride in the car and raise/lower it at will... But thats gonna come with a hefty pricetag lol. I just dunno what to doooo! __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14**

09-18-2009, 02:08 PM	#31038 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	IMO the car's stance is just fine. I would not lower it at all. Also because of speed bumps. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-18-2009, 02:14 PM	#31042 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	^ yea that's what i meant, sorry. friday stupidity __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

09-18-2009, 02:16 PM	#31045 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	stance as in the car stance or stance coilovers O_o; __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

09-18-2009, 02:17 PM	#31046 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	cars stance =P __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

09-18-2009, 02:26 PM	#31047 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	guhhh i need a nap XD __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NST CR-Lite (OEM SIZE) Crank Pulley Group Buy	NonStopTuning	Group Buys	36	02-03-2010 02:03 AM
The Mid-Atlantic Random/Useless Thread	zZSportZz	Mid-Atlantic Region	23	09-03-2009 11:01 AM
Here is what your European Version 370z will look like! Video!	Asheth	Europe	3	02-18-2009 07:54 PM
Nissan 370Z -- Canadian version?	FricFrac	Nissan 370Z General Discussions	7	12-14-2008 09:14 AM