Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   The Lounge (Off Topic) (http://www.the370z.com/lounge-off-topic/)
-   -   The New "What did you do with your Z today" (with off topic replies) XXXIII (http://www.the370z.com/lounge-off-topic/130799-new-what-did-you-do-your-z-today-off-topic-replies-xxxiii.html)

jwick 05-30-2019 07:27 PM

Quote:

Originally Posted by BoneZ (Post 3856765)
Epoxy



Curious how is holds up. It’s not quite as thick as the stuff I put down. Any idea what the materials cost?

Felix_A 05-30-2019 07:38 PM

Thanks guys, I’ll do more digging on the ASE site. I’ve looked on there a couple times and messed with a few practice tests but haven’t ever bought any study guides. I believe I could pass at least some more basic ones without a study guide. I’ll have to have a deeper poke around and see what I can figure out. :3

BoneZ 05-30-2019 07:38 PM

Quote:

Originally Posted by jwick (Post 3856777)
Curious how is holds up. It’s not quite as thick as the stuff I put down. Any idea what the materials cost?

How thick is your stuff? I was originally quoted $250 for a gallon of base and a gallon of hardener. When I picked it up, they charged me $199.

eastwest2300 05-30-2019 08:01 PM

Quote:

Originally Posted by Rusty (Post 3856730)
You really have to asked?

:icon14:

:mad:

:mad::mad::mad::mad::mad:

Pintsize725 05-30-2019 08:02 PM

Said goodbye to my favorite superintendents today. ☹️

eastwest2300 05-30-2019 08:03 PM

Quote:

Originally Posted by Rusty (Post 3856750)
ASE's are good to have. When I worked for Goodyear. They paid for my tests. I was a Master Tech when I left. JC is your best bet for info on the ASE's now. He just went through it. It's been a hundred years since I did mine.

:ugh2::ugh2::ugh2::ugh2:

eastwest2300 05-30-2019 08:03 PM

Quote:

Originally Posted by madwi (Post 3856775)
Yep, wavetrac diff getting ordered.

:mad::mad::mad::mad::mad:

eastwest2300 05-30-2019 08:03 PM

you're not spending my money wisely...

:mad:

eastwest2300 05-30-2019 08:06 PM

I on't like it duuude..

:mad:

BoneZ 05-30-2019 08:13 PM

l epoxied my floor eDubZ Madface Red

jchammond 05-30-2019 08:19 PM

Quote:

Originally Posted by BoneZ (Post 3856789)
l epoxied my floor eDubZ Madface Red

I don’t like it duuude...

:mad:

:stirthepot:

jchammond 05-30-2019 08:20 PM

Night fellas; hopefully will sleep past 2am :ugh2:

eastwest2300 05-30-2019 08:22 PM

Quote:

Originally Posted by BoneZ (Post 3856789)
l epoxied my floor eDubZ Madface Red

:mad::mad::mad::mad::mad:
:mad::mad::mad::mad::mad:
:mad::mad::mad::mad::mad:
:mad::mad::mad::mad::mad:

I on't like it duuuude.

:mad::mad::mad::mad::mad:

eastwest2300 05-30-2019 08:22 PM

Quote:

Originally Posted by jchammond (Post 3856790)
I don’t like it duuude...

:mad:

:stirthepot:

:mad::mad::mad::mad::mad:

eastwest2300 05-30-2019 08:22 PM

Quote:

Originally Posted by jchammond (Post 3856791)
Night fellas; hopefully will sleep past 2am :ugh2:

:ugh2::ugh2::ugh2::ugh2::ugh2:

eastwest2300 05-30-2019 08:24 PM

duuuuuudes.

BettyZ 05-30-2019 08:24 PM

GF half-jokingly threatened to sell my Z on craigslist. I told her, half-jokingly, that I'd sell her dog at the Korean farmer's market. #crisisaverted

eastwest2300 05-30-2019 08:25 PM

:mad:

jwick 05-30-2019 08:31 PM

The New "What did you do with your Z today" (with off topic replies) XXXIII
 
Quote:

Originally Posted by BoneZ (Post 3856779)
How thick is your stuff? I was originally quoted $250 for a gallon of base and a gallon of hardener. When I picked it up, they charged me $199.


I don’t recall as it’s based on percent solids and stuff, but I remember it being more than the 65%ish solids and 3-5mils they listed in the product spec for the stuff you ordered.

And you only needed a gallon of each?

Edit - Just found the product specs on the stuff I used, it 100% solids and has a thickness of 9.7mils. So roughly 3-4 times as thick.

Rusty 05-30-2019 10:03 PM

Quote:

Originally Posted by eastwest2300 (Post 3856786)
you're not spending my money wisely...

:mad:

Your money? He's got your Z parted out on flea-bay. :rofl2:

BoneZ 05-30-2019 10:18 PM

Quote:

Originally Posted by jwick (Post 3856798)
I don’t recall as it’s based on percent solids and stuff, but I remember it being more than the 65%ish solids and 3-5mils they listed in the product spec for the stuff you ordered.

And you only needed a gallon of each?

Edit - Just found the product specs on the stuff I used, it 100% solids and has a thickness of 9.7mils. So roughly 3-4 times as thick.

Yeah. Mixed 2 gal did 500 ft².

BoneZ 05-30-2019 10:19 PM

Quote:

Originally Posted by eastwest2300 (Post 3856797)
:mad:

Any painus tonight?

Rusty 05-30-2019 10:33 PM

Quote:

Originally Posted by BoneZ (Post 3856820)
Any painus tonight?

You shouldn't from smelling flumes from painting the garage floor. :rofl2:

Rusty 05-30-2019 10:36 PM

Had a nice nap after I got home from work. About 7pm. I couldn't keep my eyes open and the Zzzz Beast in my lazyboy got a hold of me. I was out until about 10pm.

BoneZ 05-30-2019 11:34 PM

Quote:

Originally Posted by Rusty (Post 3856824)
You shouldn't from smelling flumes from painting the garage floor. :rofl2:

True.

BoneZ 05-30-2019 11:35 PM

Looking shinier now that it's leveling out. https://uploads.tapatalk-cdn.com/201...37e2054ccb.jpg

Rusty 05-30-2019 11:36 PM

Quote:

Originally Posted by BoneZ (Post 3856857)
True.

Did you save some, and put it into a paper bag so that you can huff later? :rofl2:

Rusty 05-30-2019 11:39 PM

Quote:

Originally Posted by BoneZ (Post 3856858)
Looking shinier now that it's leveling out. https://uploads.tapatalk-cdn.com/201...37e2054ccb.jpg

Looking good. :tup: But I don't see any hooks in the ceiling to hang the dead bodies so that they will bleed out. :shakes head:

BettyZ 05-31-2019 12:23 AM

Quote:

Originally Posted by Rusty (Post 3856862)
Looking good. :tup: But I don't see any hooks in the ceiling to hang the dead bodies so that they will bleed out. :shakes head:

The walls need to be painted as well; splatter can be a real b*tch...

Sent from my SM-G955U using Tapatalk

Rusty 05-31-2019 12:47 AM

Quote:

Originally Posted by BettyZ (Post 3856865)
The walls need to be painted as well; splatter can be a real b*tch...

Sent from my SM-G955U using Tapatalk

There is no drain in the floor either. So I guess he's going to use a tub.

jchammond 05-31-2019 01:40 AM

:ugh:

jchammond 05-31-2019 02:08 AM

1 Attachment(s)
Finally a break in the recent heatwave,,,had 9 or 10 consecutive 100*+ days :ugh2:

Spoiler 05-31-2019 02:37 AM

:wtf2:

jchammond 05-31-2019 02:48 AM

Quote:

Originally Posted by Spoiler (Post 3856874)
:wtf2:

Ain’t nobody home :wtf2:

Spoiler 05-31-2019 03:21 AM

I’ve been up for a few hours studying up on the NC real estate laws, as I will be selling my house by myself soon.

Good stuff... fascinating reading...:ugh2:

Spoiler 05-31-2019 03:24 AM

I cannot see paying some yahoo realtor about 50k to do very little work.. :shakes head:

Spoiler 05-31-2019 03:40 AM

They can just ...:gtfo2:

Spoiler 05-31-2019 03:42 AM

^ never used that emo before .... it kinda feels good...

Spoiler 05-31-2019 03:42 AM

I’m such a rebel... :tup:

Spoiler 05-31-2019 03:43 AM

Ok ok... enough small talk.

Bring on the BACON


All times are GMT -5. The time now is 09:23 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2