Nissan 370Z Forum
Page 31 of 251 « First 212930 31 32334181131 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   The Lounge (Off Topic) (http://www.the370z.com/lounge-off-topic/)
-   -   The New "What did you do with your Z today" (with off topic replies) XXX (http://www.the370z.com/lounge-off-topic/128329-new-what-did-you-do-your-z-today-off-topic-replies-xxx.html)

JARblue 09-19-2018 08:09 AM
Quote:
Originally Posted by Rusty (Post 3786780)
That kit is 3/8" drive. you need 1/2" drive.
That was my concern...

I don't think there is a 1/2" option though. I've got a 14mm impact socket with swivel built in so I should be good with enough extensions.

BoneZ 09-19-2018 08:22 AM
Quote:
Originally Posted by eastwest2300 (Post 3786716)
eastwest sucks!
Nooooooo!

BoneZ 09-19-2018 08:23 AM
Quote:
Originally Posted by eastwest2300 (Post 3786724)
don't drink and drive pimp'n.
What if it's just sarsaparilla?

BoneZ 09-19-2018 08:25 AM
Mernin' y'all.

JLarson 09-19-2018 08:29 AM
Quote:
Originally Posted by BoneZ (Post 3786787)
What if it's just sarsaparilla?
You can drink that, as long as you aren't pimp'n.

eastwest2300 09-19-2018 08:31 AM
Quote:
Originally Posted by BoneZ (Post 3786787)
What if it's just sarsaparilla?
:icon17:

BoneZ 09-19-2018 08:43 AM
Looks like I may be doing a spoiler/spacer install this weekend.

Rusty 09-19-2018 08:48 AM
Quote:
Originally Posted by JARblue (Post 3786781)
That was my concern...

I don't think there is a 1/2" option though. I've got a 14mm impact socket with swivel built in so I should be good with enough extensions.
And a breaker bar with 6ft piece of pipe. :rofl2:

JLarson 09-19-2018 08:48 AM
Quote:
Originally Posted by BoneZ (Post 3786795)
Looks like I may be doing a spoiler/spacer install this weekend.
Got the terlet up and running for Mrs. BoneZ?

JARblue 09-19-2018 08:50 AM
Quote:
Originally Posted by Rusty (Post 3786797)
And a breaker bar with 6ft piece of pipe. :rofl2:
I'm hoping a week of soaking in PB Blaster with a 4 ft pipe will be enough - that's how long my floor jack handle is :tup:

onzedge 09-19-2018 09:11 AM
Good morning!!!

jwick 09-19-2018 09:14 AM
Quote:
Originally Posted by JARblue (Post 3786729)
Must be nice. I've got a pretty small yard. They charge $40/month and sometimes don't even show up once - I have to call them. And when the yard needs attending more than once a month, they try to charge me extra. That shìt got real old, real fast.

You have to look at it from their perspective. It’s all about time spent. $40 doesn’t cover much.

jwick 09-19-2018 09:19 AM
Quote:
Originally Posted by JARblue (Post 3786778)
Nice that you still have that option. I used to mow a dozen neighbor's yards when I was young. I was just one of several kids offering services in the neighborhood. Those days are long gone here.

Now it's mostly white owners who hire Mexican laborers at the lowest possible wage (often it's less than minimum because the workers aren't legal). So they never get workers with any sort of work ethic and they have weekly turnover.

The company I use does payroll tax on their workers and only uses people that can legally work in the US. It was the main driver for me picking them.

jwick 09-19-2018 09:21 AM
Quote:
Originally Posted by JARblue (Post 3786781)
That was my concern...



I don't think there is a 1/2" option though. I've got a 14mm impact socket with swivel built in so I should be good with enough extensions.

You are more than likely to break a 3/8” extension.

FPenvy 09-19-2018 09:56 AM
i see why i stuck the OG room mainly before lol you let me in random threads and i make terrible random comments lol

:stirthepot:

onzedge 09-19-2018 09:56 AM
Quote:
Originally Posted by FPenvy (Post 3786815)
i see why i stuck the OG room mainly before lol you let me in random threads and i make terrible random comments lol

:stirthepot:
:tiphat:

FPenvy 09-19-2018 10:02 AM
Quote:
Originally Posted by onzedge (Post 3786816)
:tiphat:
yea theres a thread about some guys wife buying him a 2016 Z and its a trainwreck.....so i made a nice comment/joke lol

jwick 09-19-2018 10:08 AM
Quote:
Originally Posted by FPenvy (Post 3786817)
yea theres a thread about some guys wife buying him a 2016 Z and its a trainwreck.....so i made a nice comment/joke lol

It’s a party foul to comment in here and not leave a link

FPenvy 09-19-2018 10:12 AM
Quote:
Originally Posted by jwick (Post 3786819)
It’s a party foul to comment in here and not leave a link
http://www.the370z.com/nissan-370z-g...help-asap.html

:tiphat:

JLarson 09-19-2018 10:15 AM
Quote:
Originally Posted by FPenvy (Post 3786821)
Hahah I suspect it is an indication of the OP's frustration that he "liked" your awful comment.

FPenvy 09-19-2018 10:21 AM
Quote:
Originally Posted by JLarson (Post 3786823)
Hahah I suspect it is an indication of the OP's frustration that he "liked" your awful comment.
that or he's agreeing with my statement.

BoneZ 09-19-2018 11:10 AM
Quote:
Originally Posted by JLarson (Post 3786798)
Got the terlet up and running for Mrs. BoneZ?
Not yet, but I told her the spoiler company only has a 30-day return policy and if we waited too long and something was wrong with it, we would be screwed.

BoneZ 09-19-2018 11:14 AM
Quote:
Originally Posted by jwick (Post 3786806)
You are more than likely to break a 3/8” extension.
The only 19mm I have that fits the spacer is 3/8". I'm a little concerned. My 1/2" is for the impact and too thick.

FPenvy 09-19-2018 11:16 AM
why do i feel like i'm always late to the party with any money making opportunity.

GTR forum found a thread on medical weed stocks. theres a list of some that just went to the moon last month due to the coming recreational legalization in canada next month.

one went from 50-140 in august and last night 140-233 at the moment wtf. rich getting richer. :shakeshead:

all i want is car parts dammit.

i feel i need a range trip after work to let out some anger.

Rusty 09-19-2018 11:19 AM
Quote:
Originally Posted by FPenvy (Post 3786815)
i see why i stuck the OG room mainly before lol you let me in random threads and i make terrible random comments lol

:stirthepot:
Well................ you are just a random person................:rofl2:

jwick 09-19-2018 11:19 AM
Quote:
Originally Posted by BoneZ (Post 3786837)
The only 19mm I have that fits the spacer is 3/8". I'm a little concerned. My 1/2" is for the impact and too thick.

I might have commented on the wrong post. I thought we were talking about the demon bolt.

killrain 09-19-2018 11:22 AM
Question: how do you determine the rates on swift springs when there is no number present?

I’m looking at buying a set of powertrix coil overs (RT). The fronts have 120 on them but the rears only say “rear”. I haven’t had a chance to see them in person either. I’ve searched and still can’t find any info online, unless I missed something. Oh and they are the orange ones. Thanks all!!!

Rusty 09-19-2018 11:23 AM
Quote:
Originally Posted by FPenvy (Post 3786839)
why do i feel like i'm always late to the party with any money making opportunity.

GTR forum found a thread on medical weed stocks. theres a list of some that just went to the moon last month due to the coming recreational legalization in canada next month.

one went from 50-140 in august and last night 140-233 at the moment wtf. rich getting richer. :shakeshead:

all i want is car parts dammit.

i feel i need a range trip after work to let out some anger.
They're building a medical weed place in Waynesburg.

killrain 09-19-2018 11:24 AM
I’m also still trying to catch up on this thread.

Everyone’s just :postwhore: and I keep falling behind.

killrain 09-19-2018 11:25 AM
Buuuut I will be giving repz out today.......mr onzedge, I see what you did. :tiphat:

Rusty 09-19-2018 11:25 AM
Quote:
Originally Posted by killrain (Post 3786843)
Question: how do you determine the rates on swift springs when there is no number present?

I’m looking at buying a set of powertrix coil overs (RT). The fronts have 120 on them but the rears only say “rear”. I haven’t had a chance to see them in person either. I’ve searched and still can’t find any info online, unless I missed something. Oh and they are the orange ones. Thanks all!!!
I would call Powertrix to see what they say.

FPenvy 09-19-2018 11:41 AM
Quote:
Originally Posted by Rusty (Post 3786844)
They're building a medical weed place in Waynesburg.
where was that when i was in college lol

eastwest2300 09-19-2018 12:17 PM
:ugh:

jwick 09-19-2018 01:11 PM
Repped until I ran out.

JARblue 09-19-2018 01:53 PM
Quote:
Originally Posted by jwick (Post 3786803)
You have to look at it from their perspective. It’s all about time spent. $40 doesn’t cover much.
Sorry but when you pay your workers $5/hr or less and send 2 of them to spend 45 min on my yard once a month (if that), that's a ******* stellar profit margin for that type of business.

The problem is the ones that have payroll only run it for half their employees. They charge Westlake $80/mon and send the legit employees to them. Then charge less and hire a bunch of illegals for cash only for most every other neighborhood. They know how to work the system.

Quote:
Originally Posted by jwick (Post 3786806)
You are more than likely to break a 3/8” extension.
Haha 3/8" extension for the demon bolt. If I used one of those 3/8" extreme grip sockets, the first attachment would be a 3/8 to 1/2 adapter. Still worried the adapter or socket would fail. Not worth the trouble to attempt it.

The 14mm built-in swivel I have is for a 1/2" socket :tup:

jwick 09-19-2018 01:56 PM
Quote:
Originally Posted by JARblue (Post 3786884)
Sorry but when you pay your workers $5/hr or less and send 2 of them to spend 45 min on my yard once a month (if that), that's a ******* stellar profit margin for that type of business.



The problem is the ones that have payroll only run it for half their employees. They charge Westlake $80/mon and send the legit employees to them. Then charge less and hire a bunch of illegals for cash only for most every other neighborhood. They know how to work the system.







Haha 3/8" extension for the demon bolt. If I used one of those 3/8" extreme grip sockets, the first attachment would be a 3/8 to 1/2 adapter. Still worried the adapter or socket would fail. Not worth the trouble to attempt it.



The 14mm built-in swivel I have is for a 1/2" socket :tup:

I was referring to them charging for a second cutting in a month. You have to remember they have travel time too.

JARblue 09-19-2018 02:09 PM
Quote:
Originally Posted by jwick (Post 3786885)
I was referring to them charging for a second cutting in a month. You have to remember they have travel time too.
No, fùck that. They come like one time between Nov-Feb. That should cover at least 3-4 extra visits during the spring and rainy season. I don't have a problem with extra costs if you tell me about them beforehand. But when you try to backdoor them I get mad real quick.

Clearly, you're not dealing with the same scam artists I did. Three different companies tried that.

Also, I know they have enough neighborhood work that travel between jobs is negligible. And most of the companies have multiple crews with a foreman that owns or at least possess all the equipment. Does your company pay you to drive to work and home everyday?

JARblue 09-19-2018 02:14 PM
1 Attachment(s)
Ordered a personalized plate for the Lexus :D

Wanted to support Texas Parks and Wildlife so I got their largemouth bass plate (75% goes to support fishing related programs within the agency). But I also wanted to honor the Z. I think I did pretty well overall :tup:

jwick 09-19-2018 02:21 PM
Quote:
Originally Posted by JARblue (Post 3786892)
Does your company pay you to drive to work and home everyday?

They do when I’m loaned out to a client. Claimed mileage for almost two years.

My company is pretty legit. They bill me for each trip. I get an itemized invoice for the month and I pay monthly.

Leingod 09-19-2018 02:23 PM
Bubble milk tea and clearing tickets for the remainder of the afternoon


All times are GMT -5. The time now is 10:58 AM.
Page 31 of 251 « First 212930 31 32334181131 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2