From BumbleZ to MaroonZ

mannyz · 12-29-2021, 10:36 PM

Ok so to continue on this project, I already started to work on the engine maintenance (tantrum). So far I need to fix the following problems and based on the information I found here is what direct me to do what I want to do. So first the problems:

- VVEL Error Code P1606 and U1024
- Error Codes P0300 and P0305

So what I am planning to do is:
- Changed Coils
- Changed Cam Sensors
- Have check and cleaned Injectors and replace those that are defective
- Spark Plugs are already changed - NEW

My last doubt is to go ahead and change the VVEL Control Module. Since I have the engine bay dismantled, I don't know if I should change it already, since I read here that sometimes changing the module won't fix the P0300 or VVEL error Codes.

12-29-2021, 10:36 PM	#10 (permalink)
mannyz Enthusiast Member Join Date: May 2009 Location: Orlando, FL Posts: 354 Drives: a car Rep Power: 280	Ok so to continue on this project, I already started to work on the engine maintenance (tantrum). So far I need to fix the following problems and based on the information I found here is what direct me to do what I want to do. So first the problems: - VVEL Error Code P1606 and U1024 - Error Codes P0300 and P0305 So what I am planning to do is: - Changed Coils - Changed Cam Sensors - Have check and cleaned Injectors and replace those that are defective - Spark Plugs are already changed - NEW My last doubt is to go ahead and change the VVEL Control Module. Since I have the engine bay dismantled, I don't know if I should change it already, since I read here that sometimes changing the module won't fix the P0300 or VVEL error Codes. __________________