Anyone have or seen Popchargers and Post MAF tubes as a Setup?

Nick Servin · 01-10-2015, 10:19 PM

Quote:

Originally Posted by conquistador

Someone on the g37 forums dyno'd the popcharger and it lost power across the rpm range. But they look and sound nice...

Yea due to the heat soak. Im installing a vented hood to get the trapped heat out and force feeding the popchargers with fresh air thru some hoses between the fangs. The shields should keep away the heat away also.The post maf tubes will also help the popchargers to work at their full potential while reducing heat of metal tubing on CAI. Im doing this for the uniqueness and sound

Nick Servin · 01-10-2015, 10:32 PM

Quote:

Originally Posted by Chuck33079

Yep. Short rams are worse than stock given the underhood heat on these cars. Either move the filter out of the engine bay or stick with drop ins and maf tubes.

Yea i know the heat soak issues of the overheating VHR motor. At the same time I will be installing a vented hood and letting cool air through some air hoses from the fangs. The heat shields should protect the filters from getting too hot and the silicone past maf hoses should be cooler than the metal piping on cai intakes also helping the popchargers to work to their potential along with my full exhuast setup. Im also going to paint the metal tubing and ring around the Popchargers with some black heat coating. Again this setup might not make better hp gains than the Stillen Gen 3s but I like uniqueness and bad *** sound.

SouthArk370Z · 01-10-2015, 10:58 PM

Quote:

Originally Posted by Nick Servin

... and a vented hood I should be alright. ...

I don't think you realize just how little good a vented hood does. It mainly allows more hot air across the radiator. Might give you an edge on the track but not so much for a DD. Several threads on the subject on this site.

Nick Servin · 01-11-2015, 01:24 AM

Quote:

Originally Posted by SouthArk370Z

I don't think you realize just how little good a vented hood does. It mainly allows more hot air across the radiator. Might give you an edge on the track but not so much for a DD. Several threads on the subject on this site.

But the vents dont reach the radiator? Better than keeping all that heat inside

BigT · 01-12-2015, 12:04 PM

Quote:

Originally Posted by Nick Servin

But the vents dont reach the radiator? Better than keeping all that heat inside

Venting a hood is great. But, thinking it will bring your underhood temps to ambient is wrong.

ZeroZeta · 01-14-2015, 11:53 AM

My reco is mafs and drop ins if you don't want to go with the Stillen G3 or comparable.

Nick Servin · 01-14-2015, 09:58 PM

Quote:

Originally Posted by ZeroZeta

My reco is mafs and drop ins if you don't want to go with the Stillen G3 or comparable.

Yea dude thats my current setup. Way better throttle response along little a deeper tone and suction noise. Im planning on removing the airbox resonators then installing a hose that feeds cold air into the filters. Still love the killer sound of popchargers on the VQ and turbo like whistle.

01-14-2015, 11:53 AM	#21 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 14	My reco is mafs and drop ins if you don't want to go with the Stillen G3 or comparable. Nick Servin likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Post MAF Tubes	MrZ	Intake/Exhaust	47	07-31-2015 03:46 PM
[FOR SALE] z1 post maf tubes	kenny's 370z	Parts for sale (Private Classifieds)	13	10-16-2012 10:22 AM
popchargers vs. stillen gen 3	quicksilver08	Intake/Exhaust	15	08-30-2011 12:08 PM
[FOR SALE] Complete JWT PopChargers ________	kday	Parts for sale (Private Classifieds)	3	07-08-2011 02:14 PM
independent dyno for JWT popchargers anyone?	mattkim85	Intake/Exhaust	1	04-01-2009 07:23 PM