K&N Typhoon question

PaulZ370

I have the short Ram Typhoon intakes on my Z. I've not put her on the track, but in both spirited driving and or just puttering around town on a date, in the middle of summer here in Louisiana where ambient temps tend to get in the mid nineties, I've not had a single issue with them. Response time is dramatically improved over stock airboxes with drop in K&N's, which I had prior to going to the Typhoons. They do have a barrier between them and the engine itself keeping them isolated from the heat, couple that with the fact that under driving conditions, heat is drawn towards the back of the engine and away from the intake area anyway, and one can see there should not be any, and there aren't any from experience, heat soak issues.

It seems to me that there is a lot of bad information floating around about these intakes. I read a lot of hearsay and conjecture from people who have other types of CAI's installed. I am very happy with mine, they have improved the performance of my Z (actual response as well as butt dyno) tremendously. One other added advantage to the Typhoons, is that they are tucked high into the engine bay, keeping them from sucking water in a rainstorm (where water puddling on the road and water splashing from passing vehicles in the opposing lane is a problem) and hydro-locking the engine such as the long tubes CAI's are prone to doing.

Now, everyone has their preferences, but I wanted to set the record straight on these intakes from someone who installed and used them now for close to two years. I would not install any other CAI, for the type of driving I do, on my Z.

__________________

BD2ZBN :: 2011 BSM/TRG/SP/6MT/Stillen Oil Cooler/K&N CAI/Michelin PSS/Brake Light/EIBACH Sway Bars/FI Res. HFC+18" Res. CBE/Morimoto XB LED/DRLs/10mm Spacers

megalapagas

I agree with you on the reponssiveness with the K&N Typhoons but I live here in texas and they're horrible on my car. If I spirit drive meaning ( II'll go WOT mode because I'm late for work) my oil will reach 220(due to the fact I have a 34 row which is good) but my water temps start sky rocketing. I like K&N don't get me wrong but I decided to go with K&N drop ins and Z1s silicone post maf tubes. Its my experience and ofcourse opinion but to each their own .

Felix 808

Megalapagas, get some water wetter to help with the high H2O temps.

__________________
Semper Fi

Μολὼν λαβέ

PaulZ370

I'm sorry - I'm not making the connection between intake air and water/oil temps...?

__________________

BD2ZBN :: 2011 BSM/TRG/SP/6MT/Stillen Oil Cooler/K&N CAI/Michelin PSS/Brake Light/EIBACH Sway Bars/FI Res. HFC+18" Res. CBE/Morimoto XB LED/DRLs/10mm Spacers

megalapagas

To generalize it, Heat Soak.

PaulZ370

Heat Soak while you are traveling at high speed? I can understand if you are sitting or traveling at very low speeds in traffic, but then, the effect is negligible as you are not trying to go WOT in traffic... Once you reach open highway, it may take a couple of minutes of high-er speeds to get rid of the trapped hot air under the hood.

Oil temps climb rapidly due to the way the oil sump pump and oil delivery system in the Z is designed. Very little oil stays in the sump during WOT (or spirited driving) and almost all of it is used in circulating through the engine for protection of the moving parts. I suggest you might want to upgrade your sump to a larger capacity pan to keep your oil temps cooler if that is what you are experiencing. Have you thought of doing that?

afterthought: Also, I've never seen my water temps fluctuate that much, if at all... you may want to consider checking your cooling system. Might be a leak somewhere. In a pressurized cooling system, temps should remain stable, but if you even have a pin hole leak somewhere, water will transition to steam (which is not good for heat absorption and conduction) and your temps will start 'skyrocketing' as you say.... I would definitely give your Z a good look under the hood. Something does not add up straight, and it's not the Typhoons...

__________________

BD2ZBN :: 2011 BSM/TRG/SP/6MT/Stillen Oil Cooler/K&N CAI/Michelin PSS/Brake Light/EIBACH Sway Bars/FI Res. HFC+18" Res. CBE/Morimoto XB LED/DRLs/10mm Spacers