Custom CBE with Borla XR-1's

black-370z · 04-25-2013, 12:24 AM

As the title says I had Borla XR-1's installed today. I have been running stock cats with a custom dual straight pipe for about 5 months and I loved the sound. It was loud and in your face but without the rasp. About a week ago i decided to get some test pipes and stick them in. I bought Beluga Racing TP's and they only took about 4 hours to install, so not that bad.

All i have to say is that our cars are ridiculously loud fully straight piped but sound incredibly throaty and just plain mean! I couldn't even talk to someone standing 10 feet behind my car. This setup lasted for only 3 days before I ordered the XR-1's. I imagined they would be big but these puppies are huge. 14" long and 6.25" in diameter, but they fit under the car perfectly and my fabricator made the piping look badass. Ill post some pictures tomorrow along with before and after videos.

Overall they're more high pitched than i was hoping for but they still sound good. Now its time for a LT CAI and then on to UPREV!

axmea? · 04-25-2013, 02:30 AM

Video and sound bites would be appreciated. Thanks.

Dzel · 04-25-2013, 03:58 AM

or it didn't happen. Sound clips or

DarkJak · 04-25-2013, 06:24 AM

In for pics and vids!

black-370z · 04-25-2013, 12:57 PM

Im having a hard time uploading them. Whats the best way to attach them from my computer?

ZKraken22 · 04-25-2013, 01:03 PM

This thread is gonna be nothing with out video and pics

black-370z · 04-25-2013, 01:57 PM

This is with test pipes and no mufflers or resonators.

black-370z · 04-25-2013, 04:01 PM

ZKraken22 · 04-25-2013, 04:06 PM

That does sound really good. any videos reving it?

black-370z · 04-26-2013, 12:11 AM

No that was at like 8 in the morning and I didnt want to wake everyone in the neighbor hood up lol. Ill post a video tomorrow of my car with the mufflers in and ill do a cold start and rev.

ZKraken22 · 04-27-2013, 11:51 AM

You should let me buy this CBE from you!

04-25-2013, 12:24 AM	#1 (permalink)
black-370z Base Member Join Date: Jan 2013 Location: Corpus Christi, Tx Posts: 18 Drives: 2010 370z base 7AT Rep Power: 12	Custom CBE with Borla XR-1's As the title says I had Borla XR-1's installed today. I have been running stock cats with a custom dual straight pipe for about 5 months and I loved the sound. It was loud and in your face but without the rasp. About a week ago i decided to get some test pipes and stick them in. I bought Beluga Racing TP's and they only took about 4 hours to install, so not that bad. All i have to say is that our cars are ridiculously loud fully straight piped but sound incredibly throaty and just plain mean! I couldn't even talk to someone standing 10 feet behind my car. This setup lasted for only 3 days before I ordered the XR-1's. I imagined they would be big but these puppies are huge. 14" long and 6.25" in diameter, but they fit under the car perfectly and my fabricator made the piping look badass. Ill post some pictures tomorrow along with before and after videos. Overall they're more high pitched than i was hoping for but they still sound good. Now its time for a LT CAI and then on to UPREV! 370Zsteve likes this. __________________ 2010 370z base, 7AT, magnetic black. \|lowered \| 19" Varrstoen Es2's \| Z1 MAF tubes \| K&N Drop In's \| Custom CBE with Borla XR-1's \| Beluga Racing Test Pipes \| Sony Touchscreen \| Plastidipped \|

04-25-2013, 02:30 AM	#2 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,234 Drives: WELL ZED PW 6MT Rep Power: 53241	Video and sound bites would be appreciated. Thanks. NickTurnon likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

04-25-2013, 03:58 AM	#3 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	or it didn't happen. Sound clips or __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-25-2013, 06:24 AM	#4 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,393 Drives: 2009 370Z Rep Power: 13448	In for pics and vids! __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

04-25-2013, 12:57 PM	#5 (permalink)
black-370z Base Member Join Date: Jan 2013 Location: Corpus Christi, Tx Posts: 18 Drives: 2010 370z base 7AT Rep Power: 12	Im having a hard time uploading them. Whats the best way to attach them from my computer? __________________ 2010 370z base, 7AT, magnetic black. \|lowered \| 19" Varrstoen Es2's \| Z1 MAF tubes \| K&N Drop In's \| Custom CBE with Borla XR-1's \| Beluga Racing Test Pipes \| Sony Touchscreen \| Plastidipped \|

04-25-2013, 01:03 PM	#6 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 15	This thread is gonna be nothing with out video and pics __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

04-25-2013, 01:57 PM	#7 (permalink)
black-370z Base Member Join Date: Jan 2013 Location: Corpus Christi, Tx Posts: 18 Drives: 2010 370z base 7AT Rep Power: 12	This is with test pipes and no mufflers or resonators. __________________ 2010 370z base, 7AT, magnetic black. \|lowered \| 19" Varrstoen Es2's \| Z1 MAF tubes \| K&N Drop In's \| Custom CBE with Borla XR-1's \| Beluga Racing Test Pipes \| Sony Touchscreen \| Plastidipped \|

04-25-2013, 04:01 PM	#8 (permalink)
black-370z Base Member Join Date: Jan 2013 Location: Corpus Christi, Tx Posts: 18 Drives: 2010 370z base 7AT Rep Power: 12	__________________ 2010 370z base, 7AT, magnetic black. \|lowered \| 19" Varrstoen Es2's \| Z1 MAF tubes \| K&N Drop In's \| Custom CBE with Borla XR-1's \| Beluga Racing Test Pipes \| Sony Touchscreen \| Plastidipped \|

04-25-2013, 04:06 PM	#9 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 15	That does sound really good. any videos reving it? __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

04-26-2013, 12:11 AM	#10 (permalink)
black-370z Base Member Join Date: Jan 2013 Location: Corpus Christi, Tx Posts: 18 Drives: 2010 370z base 7AT Rep Power: 12	No that was at like 8 in the morning and I didnt want to wake everyone in the neighbor hood up lol. Ill post a video tomorrow of my car with the mufflers in and ill do a cold start and rev. __________________ 2010 370z base, 7AT, magnetic black. \|lowered \| 19" Varrstoen Es2's \| Z1 MAF tubes \| K&N Drop In's \| Custom CBE with Borla XR-1's \| Beluga Racing Test Pipes \| Sony Touchscreen \| Plastidipped \|

04-27-2013, 11:51 AM	#11 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 15	You should let me buy this CBE from you! __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Borla	robbycarrion	Parts for sale (Private Classifieds)	1	02-20-2012 04:14 AM
[WTB] Used Berk or Borla CBE	OppositeLock	Parts for sale (Private Classifieds)	0	07-31-2011 09:11 AM
Feeler: Borla exhaust	wdkwang	Parts for sale (Private Classifieds)	8	05-19-2011 07:17 PM
Borla exhaust	Vinny	Intake/Exhaust	7	07-02-2010 07:23 AM
Borla Anyone?	carbonguy	Intake/Exhaust	3	05-08-2010 12:16 PM