stillen gen 3

chefsung · 03-07-2013, 07:22 AM

so i installed this last night..
but im thinking maybe i have used pipes on wrong side?
i saw pictures of everyone elses
but mine seems to sit little differently.

chefsung · 03-07-2013, 07:50 AM

is that even possible?

chefsung · 03-07-2013, 09:38 AM

i need an answer

lemon-fresh · 03-07-2013, 02:30 PM

Looks fine to me. If you got everything to fit together I'm sure the pipes are on the correct sides.

chefsung · 03-07-2013, 02:54 PM

the one the driver side was reallt difficult. very tight fit.
had to cutt of a bolt to get my filter fit.
and compared to the passenger side,
its much more pushed to the radiator.
very confused...

xxAGAVExx · 03-07-2013, 03:15 PM

Post some more pics of your engine bay

Trips · 03-07-2013, 03:49 PM

From AK's install and to compare they look fine

http://www.the370z.com/diy-section-d...de-ak370z.html

chefsung · 03-07-2013, 03:53 PM

more pictures
ill post more once i get home.

lemon-fresh · 03-07-2013, 05:02 PM

Having to cut a bolt on the drivers side is common. Sounds like the install went fine, just make sure you don't pinch the intake tubes with the clamps they give you like I did.

Phenix · 03-07-2013, 11:55 PM

Yeah I think their clamps could hold a cannon together... I had the same issue with the bolt near the filter on the driver side.

Sent from my Nexus 4 using Tapatalk 2

chefsung · 03-08-2013, 10:51 AM

yea..
i took off my bumper last night took everything apart
tried to see if i f...ked up anywhere. but
it looks kinda better. 3 hours not well spent.

SPOHN · 03-09-2013, 10:01 AM

Welcome GA guy

chefsung · 03-11-2013, 08:59 PM

thanks fellow ga guy!

Luis182117 · 03-11-2013, 09:11 PM

I have the exact same setup as this other guy and we had our cars dynode at the same place but he is getting 10 more horsepower than I am. Can anyone explain this? I had my car tuned as well.

03-07-2013, 03:15 PM	#6 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,014 Drives: 09 370Z BLK M6 Rep Power: 20368	Post some more pics of your engine bay __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

03-07-2013, 03:49 PM	#7 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	From AK's install and to compare they look fine http://www.the370z.com/diy-section-d...de-ak370z.html __________________

03-07-2013, 05:02 PM	#9 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 39 Posts: 471 Drives: 09 370z Rep Power: 13	Having to cut a bolt on the drivers side is common. Sounds like the install went fine, just make sure you don't pinch the intake tubes with the clamps they give you like I did. SPOHN likes this.

03-09-2013, 10:01 AM	#12 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Welcome GA guy __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Front 19" Sports Tires / Stillen Cat / Stillen CBE / Passport 9500 ix	Rsdntevl	Parts for sale (Private Classifieds)	24	04-29-2012 07:31 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 05:20 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM

03-07-2013, 07:50 AM	#2 (permalink)
chefsung Base Member Join Date: May 2012 Location: Atlanta GA Posts: 97 Drives: 12 370z sport Rep Power: 12	is that even possible?

03-07-2013, 09:38 AM	#3 (permalink)
chefsung Base Member Join Date: May 2012 Location: Atlanta GA Posts: 97 Drives: 12 370z sport Rep Power: 12	i need an answer

03-07-2013, 02:30 PM	#4 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 39 Posts: 471 Drives: 09 370z Rep Power: 13	Looks fine to me. If you got everything to fit together I'm sure the pipes are on the correct sides.

03-07-2013, 02:54 PM	#5 (permalink)
chefsung Base Member Join Date: May 2012 Location: Atlanta GA Posts: 97 Drives: 12 370z sport Rep Power: 12	the one the driver side was reallt difficult. very tight fit. had to cutt of a bolt to get my filter fit. and compared to the passenger side, its much more pushed to the radiator. very confused...

03-07-2013, 11:55 PM	#10 (permalink)
Phenix Base Member Join Date: Nov 2008 Location: Texas Posts: 39 Drives: 09 370Z /07 S2000 Rep Power: 16	Yeah I think their clamps could hold a cannon together... I had the same issue with the bolt near the filter on the driver side. Sent from my Nexus 4 using Tapatalk 2

03-08-2013, 10:51 AM	#11 (permalink)
chefsung Base Member Join Date: May 2012 Location: Atlanta GA Posts: 97 Drives: 12 370z sport Rep Power: 12	yea.. i took off my bumper last night took everything apart tried to see if i f...ked up anywhere. but it looks kinda better. 3 hours not well spent.

03-11-2013, 08:59 PM	#13 (permalink)
chefsung Base Member Join Date: May 2012 Location: Atlanta GA Posts: 97 Drives: 12 370z sport Rep Power: 12	thanks fellow ga guy!

03-11-2013, 09:11 PM	#14 (permalink)
Luis182117 Base Member Join Date: Mar 2013 Location: Savannah Posts: 4 Drives: 2011 370Z black 6 sp Rep Power: 12	I have the exact same setup as this other guy and we had our cars dynode at the same place but he is getting 10 more horsepower than I am. Can anyone explain this? I had my car tuned as well.