No, you can't equate the hp that way. A Lotus Elise SC may smoke our 370Z and it has under 300hp. Power to weight ratio is a better way to compare the cars.

ahhh damn I forgot about that. Yeah good point..well fck I'm back to square one.

Lots of factors come into play, power to weight being the most significant. Then you have gearing, tires, RWD vs AWD, shifting etc..

Of course by racing you meant on the track :)

put it onnnnnnnnnnnnnnnn!

Yeah well it would only be a couple days difference. Get the exhaust on wed. Hopefully get the dyno done Sat. and put the exhaust on Sun. or Mon. I would like to know the gain and what my baseline are. It could actually all be done Sat. but I doubt it.

do it now and come up to roundrock sunday :happydance:

Three one

So if Tony works real hard maybe he'll ship mine out next Monday and it will get here on Thursday so I can install Friday morning... :bowrofl:

How is everyone getting their bolt-ons tuned ? Is it just dyno and wide band O2 ?

Tony should be able to answer this

havent tuned mine yet...holding out to see what cobbs is going to release for the 370z as far as maps go...

getting my baseline done on Sat and installing on sat with the HFC. Will go back for another dyno at a later date(monday at the earlist) and it will all be done on a dyno jet. Seeing as how Houston weather is pretty consistent it shouldn't differ greatly getting it done 2 days apart because both days will be hot and crappy.

What shop in Houston are you using?

You guys only do install's right, no dyno at your shop?

I was gonna use Engine Logics but when I called they were pretty short with answers(the lady answering the phone was anyways). I remembered seeing on Carboys' website that they had a dyno and called them up becuase they did my KW V3 install on my 350z and did an EXCELLENT job and the car came back very clean and they were very professional. So I'm going to them for it. They have a dyno jet and Engine Logics has a DD(which I was kinda hoping to use) but it doesn't really matter.

Oh man the wait is killing me knowing that it so close to being here. We had a good cruise last night through some mountains and Damn it would've been good to hear this bouncing of the mountains:tup:

oh it definately will bounce off of anything! I go out of my way to look for things for the sound to bounce off of :icon17:

trust me...i get sooooo many more looks now than before its not even funny :rofl2: but yet it is :tup:

Just FYI, I've brought my Z to both of these shops. Yes, the EngineLogics guys have a pretty busy schedule and perhaps not the best attitude (like as in: "what, you want us to sell you something? hmm, let me see if we have time... no"), but the DD dyno there is awesome, and the techs there seem pretty knowledgeable. The DynoJet at Carboy reads low and very erratically from run to run and day to day by comparison. I think it's in need of some maintenance, or calibration, or perhaps more consistency in how they strap the cars down, etc. The Carboy guys are really nice though, and it's a fun place to hang out at and talk car stuff :)

Will also be bouncing of limiter as well:driving:.

I already get looks because of the car and thats a great feeling. Now to add sound that should've gone with car is just going to make it that much sweeter:tup:

Yeah but the site on the enginelogics site says open Saturdays(sometimes) and I asked them if I could do my dyno on Saturday and they said I could at 8 a.m. I said that I was working until 10 a.m. and that I would prefer to do it early in the afternoon. They acted like they didn't want to do it so I just told myself forget it and found somewhere else. I feel the carboys guys are in the know too because when I took the 350 there I was amazed that I took my car somewhere and when I got it back it wasn't making sounds/rattles/noises that it wasn't before. They took good care of it. I will admit that I did want to get it done on the DD.

:roflpuke2: to the rev limiter...

and true that :tup: the exhaust should have sounded this good from the get go...

i was just out in my garage looking at my stock exhaust sitting there in a pile looking puny...and i was thinking "what the hell was nissan thinking when they designed this whimpy a$$ exhaust" :eek:

Tony,

How about an update on how the work load is going. It's time for an order list update.;)








:stirthepot: Thank You.

[QUOTE=Pointman;192022]Tony,

How about an update on how the work load is going. It's time for an order list update.;)



Wasn't there an update 3 pages ago on 95 ?:confused:

was this the update?

You are correct, some how I missed it. :icon14:

Next week we should be a little more caught up, we should be right on schedule as to what each original ship date is. Thank you all for your patience as we will continue to bring you the best product and customer service possible...

Tony :tup:

Nick from England thanks for the order...

Happy B Day to me!

Digitonium: 001 (Installed)
Tonmed123: 002 (Installed)
Import111: 003 (Installed)
Zat Zuma: 004 (Delivered)
Dszombiex: 005 (Installed)
FuszNissan: 006 (Delivered)
Crbn_Fbr: 007 (Installed)
Phelan: 008 (Installed)
Kolya: 009 (Installed)
GMZ: 010 (Delivered)
Wstar: 011 (Delivered)
Zigmon: 012 (Installed)
Drisko: 013 - (Installed)
Jason S: 014 (Delivered)
Daishi: 015 (Delivered)
Kdomilger: 016 (Installed)
B1nks: 017 (Delivered)
MrBMW: 018 (Shipping this week)
MrBMW: 019 (Shipping this week)
MrBMW: 020 (Shipping this week)
MacDaddy: 021 (Shipping next week)
Sonic370Z: 022 (Shipping next week)
m4a1mustang: 023 (Shipping next week)
Seeyabud86: 024 (Possibly next week)
Overzlus: 025
G35Guy84: 026
Argen G (Non Forum Member): 027
Pointman: 028
Racerxj17: 029
Dainedazz: 030
Jerkey: 031
Caleb B (Non Forum Member): 032
Devious Z: 033
Nick (Non Forum Member-England): 034
__________________

*crosses fingers* hopefully I can install on my birthday weekend!

All PM's replied!

getting closer & closer:excited:

Happy Birthday, Tony! Please don't get too trashed before you start working on my exhaust...j/k.

:roflpuke2:

HAPPY B-DAY BABY ;)

http://msp254.photobucket.com/albums...zzle/funny.jpg
http://bigpicture.typepad.com/writin...es/mf_beer.jpg

Happy Birthday, Tony!!!

Yo tony! Happy birthday!;)

im am gonna celebrate with you right after work today :tiphat:

http://i215.photobucket.com/albums/c...ppyBeerDay.jpg

^^ product of the philippines! haha

its good beer, i brought back an empty bottle years ago, its sitting on my desk now...

Thanks everyone!

Happy bday!

Happy B-Day Tony

http://www.freewebs.com/stives1111/H...0Animation.gif



dont mind the 4th of july in the pic..... LOL

Keep up the great work Tony. We can't wait to get our exhausts on and done mate. I'm more than certain you will keep bringing all of us some great products in the FUTURE (TT Kit:tup:).